i want my stock cold start back since v4.03 took it away - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

oBradyG · 09-25-2021, 09:20 AM

couple questions..

1. So im new to the tuning and stuff and i recently tuned my car to Stg. 2 since my header has a cat and i want it to be warmed properly, and i dont like how the v4.03 took away the cold start. ive searched up and down the forums trying to find what exactly i have to change but i end up getting confused lol. Does anyone know what exact tables to change to get my stock cold start back and keep the stg 2 tune the same?

2. how do i get a copy of my stock rom to copy those tables?.. i tried pulling it from open flash manager but it saves as .ori, and when i change it to .bin and try opening it in rom raider i get a bunch of errors and dont wana try and copy those tables.

sorry since im a noob at this

Westen86 · 09-25-2021, 10:55 AM

oBradyG · 09-25-2021, 11:37 AM

Quote:

Originally Posted by Westen86

i did just did this, do i not change anything on the G, H, and I tables? and also im seeing things about editing the MAF tables? is that needed? it doesn't show it in this video? do i even need to edit it since im automatic? i just saw something say that its for MT only? idk tho..

Westen86 · 09-25-2021, 05:45 PM

Oh, Im not sure. But I found this video in about 1 min. Dig around. Its out there somewhere.

oBradyG · 09-26-2021, 12:09 PM

So im new to learning about tuning and stuff and have been doing research..

so Two things…

1. So I recently got a Catted speedfactory header and before I tuned, I loved the cold starts. Since i tuned to stg 2 v4.03 the cold starts are gone; I know they have ways to get it back, but not to stock levels. Does anyone know the stock tables for idle speed target tables A-F, ignition timing post start, and MAF Correction after start (in gear) and (neutral)? I’ve searched the all the forums and can’t seem to find them..

2. if they are not available to find; what are the correct MAF correction tables for v2 files cause people say that’s the best to use, but I always see the values after the change but not before the change, I know the correct idle speed target tables A-F for v2.. and ignition timing post start is on -15 , but I cannot find the MAF correction tables before they change them to remove the cold start, i want them FOR having the cold start.

Thanks!!

gt7877 · 09-26-2021, 04:19 PM

oBradyG · 09-27-2021, 01:14 AM

Quote:

Originally Posted by gt7877

Thanks! Just to be clear, that’s stock? Or the v2 tune? Thanks again

gt7877 · 09-27-2021, 03:47 AM

At idle speed

U can add what ever RPM u need

1440k 1600k that's all

09-25-2021, 09:20 AM	#1
oBradyG Member Join Date: Sep 2021 Drives: 2020 Subaru BRZ AT Location: LA Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	i want my stock cold start back since v4.03 took it away couple questions.. 1. So im new to the tuning and stuff and i recently tuned my car to Stg. 2 since my header has a cat and i want it to be warmed properly, and i dont like how the v4.03 took away the cold start. ive searched up and down the forums trying to find what exactly i have to change but i end up getting confused lol. Does anyone know what exact tables to change to get my stock cold start back and keep the stg 2 tune the same? 2. how do i get a copy of my stock rom to copy those tables?.. i tried pulling it from open flash manager but it saves as .ori, and when i change it to .bin and try opening it in rom raider i get a bunch of errors and dont wana try and copy those tables. sorry since im a noob at this

09-26-2021, 12:09 PM	#5
oBradyG Member Join Date: Sep 2021 Drives: 2020 Subaru BRZ AT Location: LA Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Stock cold start tables? So im new to learning about tuning and stuff and have been doing research.. so Two things… 1. So I recently got a Catted speedfactory header and before I tuned, I loved the cold starts. Since i tuned to stg 2 v4.03 the cold starts are gone; I know they have ways to get it back, but not to stock levels. Does anyone know the stock tables for idle speed target tables A-F, ignition timing post start, and MAF Correction after start (in gear) and (neutral)? I’ve searched the all the forums and can’t seem to find them.. 2. if they are not available to find; what are the correct MAF correction tables for v2 files cause people say that’s the best to use, but I always see the values after the change but not before the change, I know the correct idle speed target tables A-F for v2.. and ignition timing post start is on -15 , but I cannot find the MAF correction tables before they change them to remove the cold start, i want them FOR having the cold start. Thanks!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OFT] Can I simply delete cold start from Stock Tune?	StatusIsChecked	Software Tuning	5	12-31-2020 12:48 AM
Greddy Remark axle back Install & Cold Start Video !	Funk	Engine, Exhaust, Transmission	1	04-24-2018 04:37 PM
Greddy Remark axle back Install & Cold Start Video !	Funk	Engine, Exhaust, Transmission	0	04-24-2018 10:10 AM
Oft v4 files Bring back cold start	Hayer_86	Software Tuning	5	04-09-2018 11:49 PM
White Smoke cold start up in Cold Weather (turbo cars)	whitefrs	Forced Induction	17	09-25-2013 05:05 PM

09-26-2021, 04:19 PM	#6
gt7877 Senior Member Join Date: Aug 2018 Drives: turbo frs Location: worldwide Posts: 173 Thanks: 122 Thanked 8 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)

09-27-2021, 03:47 AM	#8
gt7877 Senior Member Join Date: Aug 2018 Drives: turbo frs Location: worldwide Posts: 173 Thanks: 122 Thanked 8 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	At idle speed U can add what ever RPM u need 1440k 1600k that's all

User Name		Remember Me?
Password