Innovate (Sprintex) Supercharger Owners Topic - Page 450 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Chad86 · 04-22-2015, 06:31 PM

Looking at 3" exhaust setups for the Sprintex 335 and looking at the PTuning 3" Dual Cat Back
Anyone have this exhaust?

Chrisbrz14 · 04-22-2015, 06:46 PM

Quote:

Originally Posted by moto-mike

Hard to say since I'm not there to appreciate the stumble. I've had folks video the tach which helps a good bit. Sometimes we can see AFR fluctuations on the wideband.

Im not to far away mike, id be happy to bring you my car since i have the same "stumble" mentioned by others, if that would help.

Xero-Limit · 04-22-2015, 11:18 PM

Quote:

Originally Posted by Chrisbrz14

Im not to far away mike, id be happy to bring you my car since i have the same "stumble" mentioned by others, if that would help.

Definitely. Give a call next week and we can take a look.

Harro · 04-23-2015, 01:39 AM

Quote:

Originally Posted by CK_Bladesmith

Does it do this normally while the car is cold or still once warmed up...?

Either - warm or cold.

Quote:

Originally Posted by Fizz

Yes, happens on mine as well, especially on low rpm with small throttle openings. Most of the time I'm able to drive around the problem, but sometimes it catches me out.

Yup thats how it happens on mine too - does sound like tune related.

I guess it would be difficult for a tuner to pick up as they usually do WOT to get the best power out of the vehicle and this is a low throttle application.

vaderbloke · 04-23-2015, 03:02 PM

FWIW I think some of my low RPM issues were caused by leaks around those pesky plastic hose fittings. I smeared some joint compound around for a temporary diagnostic "fix". That seemed to help. I have ordered some of these:

http://www.britishmetrics.com/store/...Barb-BSPT.aspx

They come in 6,8,and 10 mm barbs.

brianhj · 04-23-2015, 04:11 PM

Also you can get the barb and elbow separately. Makes it easier to screw them in as you don't need as much clearance. Someone posted them way back in thread.

uRBAN_Metal · 04-23-2015, 04:27 PM

I have a Jackson Racing kit with a Moto-East tune, and I have a stumble like Mike was talking about. It may be the same you're experiencing with this kit. I installed a wideband and was able to see a lean condition when the stumble happened.

SpeedWi · 04-23-2015, 05:37 PM

Thought I would post my vacuum actuator setting. Don't know if it means anything but doesn't hurt.

Dream20b · 04-27-2015, 09:08 AM

ITS ALIVE! ITSSSSS ALIIIIIIIIIIVE!

SpeedWi · 04-27-2015, 10:04 AM

Anyone know if a VIS AMS style Hood clears the SC.

kwest.papajohns · 04-27-2015, 03:04 PM

Where can I buy stage 1 Innovate SC Non-Intercooled kit with all tuning included?

R3NIK · 04-27-2015, 03:15 PM

Quote:

Originally Posted by kwest.papajohns

Where can I buy stage 1 Innovate SC Non-Intercooled kit with all tuning included?

Moto-East.com @moto-mike

Best package deal out there and excellent support. $750 for full EcuTek license, dongle, cable, and tune. Total kit is under $4000. Do remember that Sprintex sells the kit now, the Innovate partnership is over. You won't find this supercharger almost anywhere under the Innovate name.

If you have E85 available, get the 70mm pulley at the same time. It makes a world of difference

R3NIK · 04-27-2015, 03:20 PM

Quote:

Originally Posted by Dream20b

ITS ALIVE! ITSSSSS ALIIIIIIIIIIVE!

Cool, first time install? Nice pulley.

sickmint79 · 04-27-2015, 08:51 PM

e85, headers, stage 2, 70mm pulley -

what kind of whp numbers are you getting?

anyone tracking with comments? feel on track? video?

on one hand it seems to sound good to get another supercharger that grows more up top, or a turbo, with in theory more power in the 5-7k rpm range where you should be on track; although it seems like the above mentioned combo will actually deliver quite a bit of power in this range as well. would love to hear someone with more experience chime in !

04-27-2015, 09:08 AM	#6295
Dream20b Y u do dis? Join Date: May 2014 Drives: 2013 Scion FR-S Location: Northbrook, IL Posts: 465 Thanks: 832 Thanked 194 Times in 107 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	ITS ALIVE! ITSSSSS ALIIIIIIIIIIVE! __________________ Dat Hot Lava Doe Clearly you have no clue what you are talking about. Everything you said was completely and utterly the ramblings of a babbling idiot regurgitating garbage from his mouth. Everyone here is now dumber from reading your post. Please die now.

04-27-2015, 08:51 PM	#6300
sickmint79 Senior Member Join Date: Feb 2012 Drives: bmw Location: grayslake, il Posts: 393 Thanks: 16 Thanked 142 Times in 84 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	e85, headers, stage 2, 70mm pulley - what kind of whp numbers are you getting? anyone tracking with comments? feel on track? video? on one hand it seems to sound good to get another supercharger that grows more up top, or a turbo, with in theory more power in the 5-7k rpm range where you should be on track; although it seems like the above mentioned combo will actually deliver quite a bit of power in this range as well. would love to hear someone with more experience chime in ! __________________ PointMeBy - auto enthusiast / 86 / car blog - https://www.pointmeby.com IGoByPlane - travel/credit/auto experience blog - https://www.igobyplane.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovative ideas to increase interior storage capacity?	swift996	Cosmetic Modification (Interior/Exterior/Lighting)	0	01-30-2013 10:45 PM
AVO vs Innovative	diss7	Forced Induction	32	01-21-2013 06:15 PM
Not another need to drive topic	Sargy	Mid-Atlantic	5	11-27-2012 12:18 PM
Technical topic sub-forums	OrbitalEllipses	Site Announcements / Questions / Issues	1	07-17-2012 11:38 PM
Can you close the topic please?	Standardsuspension	Brakes, Suspension, Chassis	14	06-26-2012 05:14 PM

04-23-2015, 04:11 PM	#6292
brianhj Senior Member Join Date: Jul 2013 Drives: 2017 Camaro 1SS Location: Houston, TX Posts: 869 Thanks: 321 Thanked 347 Times in 199 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Also you can get the barb and elbow separately. Makes it easier to screw them in as you don't need as much clearance. Someone posted them way back in thread.

04-23-2015, 04:27 PM	#6293
uRBAN_Metal Member Join Date: Nov 2013 Drives: '13 BRZ Location: Illinois Posts: 35 Thanks: 26 Thanked 30 Times in 14 Posts Mentioned: 2 Post(s) Tagged: 2 Thread(s)	I have a Jackson Racing kit with a Moto-East tune, and I have a stumble like Mike was talking about. It may be the same you're experiencing with this kit. I installed a wideband and was able to see a lean condition when the stumble happened.

04-27-2015, 03:04 PM	#6297
kwest.papajohns Member Join Date: Apr 2015 Drives: red frs Location: Livonia, MI Posts: 18 Thanks: 2 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Where can I buy stage 1 Innovate SC Non-Intercooled kit with all tuning included?

User Name		Remember Me?
Password