RCE Tarmac 2 CLUBSPORT and RCE Tarmac 0 coilovers available now - Page 42 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Racecomp Engineering · 07-21-2015, 01:29 PM

Quote:

Originally Posted by Calum

I finally had the time to install my T0's today. As I don't have a particularly level drive way, and my car was already lowered, I tried using the measurements included with the instruction. I went with the max height as I've read a few times that the heights these can go is about -15mm. Will this work/is it safe? Or do I need to adjust them to get them to my target height? Mainly I'm asking is because the front appears higher than it should and I don't want to ruin my brand new parts.

Thanks guys, and thanks for the awesome product. I had it out for a short test drive and it feels really predictable mid corner, which was my biggest grip with my old setup.

I need a fender to center of hub measurement and a picture would be helpful as well.

email it to me.

Myles

Calum · 07-21-2015, 02:49 PM

Quote:

Originally Posted by Racecomp Engineering

I need a fender to center of hub measurement and a picture would be helpful as well.

email it to me.

Myles

Email sent via your website. Thanks.

stockysnail · 03-08-2016, 02:43 AM

Quote:

Originally Posted by smbstyle

Randy Pobst liked our BRZ with the T2's so much he wrote an article about it in SportsCar magazine; "Best Handling Car I've Ever Driven":

What were your T2's settings when he drove the car? Since it was so good I would be inclined to copy it to see if I like it.

smg1138 · 03-08-2016, 10:28 AM

For the other guys running the Tarmac 2's, what settings are you using for AutoX? I have an event on Sunday and I was planning to start out with Racecomps recommended settings. Also, are you guys running stock sway bars or a bigger bar up front?

Panamaniac · 03-08-2016, 11:54 AM

Just ordered my RCE Tarmac 2s with 400/400 springs.

Thanks Myles and Lawrence!

smbstyle · 03-08-2016, 08:41 PM

Quote:

Originally Posted by stockysnail

What were your T2's settings when he drove the car? Since it was so good I would be inclined to copy it to see if I like it.

Hey I dont have the specs on me (they're in our trailer out in TX) but it's the same settings that RCE posted up on their Facebook page; recommended initial settings for the T2. Shoot them an email if you don't have FB and they'll gladly provide them.

Panamaniac · 03-23-2016, 12:35 PM

Just got my Tarmac 2!!!

They look Gorgeous!!!

The camber plates are back ordered until next week.
Should I install the coilovers w/out them?

smg1138 · 03-23-2016, 01:21 PM

Quote:

Originally Posted by Panamaniac

Just got my Tarmac 2!!!

They look Gorgeous!!!

The camber plates are back ordered until next week.
Should I install the coilovers w/out them?

If you're going to install camber plates, you might want to wait. Having to take out the entire front suspension to change them would be a major pain.

FYI you can get a lot of camber just using 14mm Subaru crash bolts in the slotted hole. I use the stock tophats with mine and have -3 camber up front right now.

Pat · 03-23-2016, 02:42 PM

Quote:

Originally Posted by smg1138

FYI you can get a lot of camber just using 14mm Subaru crash bolts in the slotted hole. I use the stock tophats with mine and have -3 camber up front right now.

Thanks for sharing your experience. I have camber plates now on stock suspension but might want to follow your path when the time comes for T2s. It's nice to know 3* is possible.

stockysnail · 03-23-2016, 06:58 PM

My car was feeling left out so I called Myles and ordered the Tarmac 2. My car will feel even more specialer now in about a week.

Yes I had a grammar issue in that sentence! My RCE Yellow springs and Koni Yellow insert shocks are now up for sale, which were great too if you're asking.

v1beeee · 10-20-2017, 08:42 PM

So do the 0's come with the conical washers now? I'm really interested in purchasing a set of these.

df.dima · 10-20-2017, 11:59 PM

Quote:

Originally Posted by v1beeee

So do the 0's come with the conical washers now? I'm really interested in purchasing a set of these.

I don't recall if some people did not get them, I got them early on in a GB and the washers were included.

Racecomp Engineering · 10-21-2017, 10:55 AM

Quote:

Originally Posted by v1beeee

So do the 0's come with the conical washers now? I'm really interested in purchasing a set of these.

Just let us know if you need them when you order.

- Andrew

v1beeee · 10-21-2017, 11:33 AM

Quote:

Originally Posted by Racecomp Engineering

Just let us know if you need them when you order.

- Andrew

Will do! Hopefully in the next month or so!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racecomp Tarmac II Clubsport coilover	JoeBoxer	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	47	11-16-2013 11:02 PM
Tarmac Zero Coilovers Specs?	tintumz22	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	18	06-13-2013 11:26 PM
KW CLUBSPORT COILOVERS W/ FREE SHIPPING FOR THE SCION FR-S/SUBARU BRZ!!!	NJA	Brakes, Suspension, Chassis	7	03-30-2013 08:26 PM
Wheel Directory: Enkei ES-Tarmac 16x7.0 +45	quik1987	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1	09-12-2012 12:24 PM
Toyota 86 Tears Up Tarmac at 2012 TAS (TRD, N1, HKS, Up Garage Models) + LFA Roadster	knoxviue	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	35	01-20-2012 01:44 AM

03-08-2016, 10:28 AM	#578
smg1138 Senior Member Join Date: Jan 2014 Drives: 2013 Raven FR-S Location: Nashville Posts: 775 Thanks: 968 Thanked 213 Times in 136 Posts Mentioned: 3 Post(s) Tagged: 2 Thread(s)	For the other guys running the Tarmac 2's, what settings are you using for AutoX? I have an event on Sunday and I was planning to start out with Racecomps recommended settings. Also, are you guys running stock sway bars or a bigger bar up front?

03-08-2016, 11:54 AM	#579
Panamaniac Member Join Date: Feb 2016 Drives: 2013 Scion FR-S Location: Panama Posts: 28 Thanks: 6 Thanked 25 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Just ordered my RCE Tarmac 2s with 400/400 springs. Thanks Myles and Lawrence!

03-23-2016, 12:35 PM	#581
Panamaniac Member Join Date: Feb 2016 Drives: 2013 Scion FR-S Location: Panama Posts: 28 Thanks: 6 Thanked 25 Times in 16 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Just got my Tarmac 2!!! They look Gorgeous!!! The camber plates are back ordered until next week. Should I install the coilovers w/out them?

10-20-2017, 08:42 PM	#585
v1beeee Member Join Date: Dec 2015 Drives: 14 FRS Whiteout Location: Mississauga Posts: 61 Thanks: 30 Thanked 8 Times in 8 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	So do the 0's come with the conical washers now? I'm really interested in purchasing a set of these.

User Name		Remember Me?
Password