FA20CLUB Innovate Supercharger Tuning, Parts, Improvements & Results

[Sportsguy83]

Originally Posted by FA20Club.com

93 is less prone to knock on this kit but i have gotten the same complaints from other customer of other Tuners dealing with their kits and are having the same tip-in knock issues. its one thing to solve the issue on the dyno without extensive testing on the street in extreme conditions. Arizona is is a great proving ground for this type of testing no wonder GM, Nissan Toyota and other manufacturers have private testing facilities right their in the valley.

@448hpsti @kiichiro is weeping tears of joy and victory right now!

[evo4g63]

Originally Posted by Sportsguy83

@448hpsti @kiichiro is weeping tears of joy and victory right now!

It's true, the heat down here really puts extra stress on vehicles

[lbroskee]

screw pulley testing. i want info on that intercooler!!

[Sportsguy83]

Originally Posted by evo4g63

It's true, the heat down here really puts extra stress on vehicles

I know. Although my comment was a joke, the rigorous testing in the heat part is also true.

[lbroskee]

Originally Posted by FA20Club.com

$99

does it require modding to the manifold? is it str8 bolt on? or do u do it b4 it's shipped to us?

[kombatlion]

Looking foward to this upgrade amd intercooler upgrade as well as the pulleys now will you add a tune? you have very good reputation as tunning goes!

[kiichiro]

@FA20Club.com the work you're posting looks great, I commend you!

Would love to see a tuner take a sophisticated route and rig out a car with this sc, Idc based wmi,(Toni if you haven't dealt with Richard and Jeff over at howerton, I'd be pleased to make the introduction) I been working on a kit or three months while I was in hiding I been busy.

I can't consider a kit without a ic but you're direction is sound

Consider adding aquamist, it's great delivery of wmi bet this kit can rock with he option for flex corn juice or on demand meth. Keep up good work

[King Tut]

Originally Posted by Sportsguy83

@448hpsti @kiichiro is weeping tears of joy and victory right now!

Don't encourage him you two.

[King Tut]

Originally Posted by kiichiro

@FA20Club.com the work you're posting looks great, I commend you!

Would love to see a tuner take a sophisticated route and rig out a car with this sc, Idc based wmi,(Toni if you haven't dealt with Richard and Jeff over at howerton, I'd be pleased to make the introduction) I been working on a kit or three months while I was in hiding I been busy.

I can't consider a kit without a ic but you're direction is sound

Consider adding aquamist, it's great delivery of wmi bet this kit can rock with he option for flex corn juice or on demand meth. Keep up good work

Starting to sound like a vendor hocking a product. Might be time to pay the $80 a month so you can't be banned.

[xxscaxx]

Originally Posted by lbroskee

does it require modding to the manifold? is it str8 bolt on? or do u do it b4 it's shipped to us?

no it will bolt right into place, with or without their IAT sensor plate.

[Noob4Life]

I hope they release the stage 2 soon! I definitely want this kit but don't want to pull the trigger on the stage 1. Cali 91 sucks and I don't have E85 readily available so I figure I'll stay NA until this kit comes out with the IC. Until then I guess it's supporting mods only :[

Can't wait to see some dynos with the 66mm pulley and IC.

[xjohnx]

Originally Posted by Noob4Life

I hope they release the stage 2 soon! I definitely want this kit but don't want to pull the trigger on the stage 1. Cali 91 sucks and I don't have E85 readily available so I figure I'll stay NA until this kit comes out with the IC. Until then I guess it's supporting mods only :[

Can't wait to see some dynos with the 66mm pulley and IC.

I just saw the post about the 66mm pulley. I was under the impression 70mm put the blower at redline at 7800 RPM? What kind of boost are you guys expecting with the 66mm, @FA20Club.com?

[Noob4Life]

Originally Posted by xjohnx

66mm pulley?? where'd you see this? I was under the impression 70mm put the blower at redline at 7800 RPM?

Originally Posted by FA20Club.com

Next up for testing are a few different pulley sizes we have recently released.With the quest for additional power first thing to come is a smaller pulley. We have already released the 70mm unit earlier last week. Next up is our more extreme pushhhhhh 66mm pulley. Our first test will be of the 70mm on both pump gas non intercooled and yes INTERCOOLED. And no, this will not be down the line this will be within the week if all goes to planning. We will finish up the testing of the pulleys with E85 and WMIif we can find a kit to borrow

Read Read Read

EDIT: posted before your edit lol

[xjohnx]

Originally Posted by Noob4Life

Read Read Read

I got in with the ninja edit Sorry about that.