BRZ MY17+ front lip options?

[SGTPanda]

Hey guys just wanted to see if anyone knows of MY17+ BRZ front lips. I already know of the STI lip and other replicas. Have they made any besides those? And yes I already googled it.

[dvniemela]

Believe RallyBacker makes some sort of lip/splitter for the 17'.

https://sites.google.com/view/rallyb...a-86-version-2

[VerusEric]

We make a front splitter, very similar to the FRS/BRZ of previous years.

https://www.verus-engineering.com/pr...front-splitter

Thank you,
Eric

[NRXRaptor]

Go to 86speed (dot) com, mouse over the "More" tab, and click on "Kouki 86-BRZ." Not much there in terms of splitters, but I bet drilling some new holes on a splitter for a 2016 wouldn't be so hard. Even easier for a front diffuser. Honestly you should just find vendor sites like 86speed, subispeed, rallysport, etc and peruse their selections in their entirety. I guess that's an advantage of having the older car: more parts

[SGTPanda]

Thanks for the input guys but those are all toyotas lips. I'm looking for lips that fit the MY17+ BRZ.

[TachyonBomb]

Originally Posted by SGTPanda

Thanks for the input guys but those are all toyotas lips. I'm looking for lips that fit the MY17+ BRZ.

Welcome to my hell!

The only companies with 2017+ lips are:

APR - Has replicas



Chargespeed Version 1 - Has replicas



STI and STI reproductions



Chargespeed Version 2



S-Craft



HT Autos - Pics on next page
IKON style lip (found it on ebay - a reproduction of the 12-16 style lip but fitted for 2017+ bumpers)
AIMGAIN (The lip will look weird alone, needs the accompanying front bumper (side burn) wide body extensions)

*VIS Racing said they are looking to make a 17+ brz lip in the future. Nothing has come about this in over a year.


Companies that have made 2017+ 86 lips:

Rallybacker
Greddy
Chargespeed Version 1
Chargespeed Version 2
Stance Nation x Aimgain collaboration
TRD (Looks bad ass if you get the LED lights option)
Grazio
Modellista
Garage Vary
VIS Racing
Battle Aero
C-West
Silk Blaze
TOM'S

Seibon is currently working on an 86 lip

[VerusEric]

Our splitter bolts up to 2017+ BRZ and GT86 bumpers, no problem .







Thanks,
Eric

[NRXRaptor]

Originally Posted by VerusEric

Our splitter bolts up to 2017+ BRZ and GT86 bumpers, no problem .







Thanks,
Eric

Are those the Valenti headlights? Kinda wish I got those and re wired them to fit left hand drive instead of getting the Intec ones. The Intecs do have a really nice Audi style led strip though

[derekbrz24]

Originally Posted by VerusEric

Our splitter bolts up to 2017+ BRZ and GT86 bumpers, no problem .







Thanks,
Eric

What rear spats are on the car?

[NRXRaptor]

Originally Posted by derekbrz24

What rear spats are on the car?

Probably theirs

[Brink]

Originally Posted by VerusEric

Our splitter bolts up to 2017+ BRZ and GT86 bumpers, no problem .







Thanks,
Eric

Can you confirm your splitter requires the support rods to be installed on a 2017 BRZ? Yours was a product I liked the looks of (particularly with the added endplates), and I liked for previous model years that there was the option of installing without support rods for <90 MPH, or with rods for greater speeds. It seems due to changes to the front end of the 2017 model year the mounting points now require the support rods for all installations. Is this true? I don't like the idea of drilling into the front crash beam to install this if that is the case, so I'll probably end up going in a different direction. Right now the APR front air dam (and other aero kit) is at the top of my list but I'm waiting a bit longer to see if anything else becomes available since there isn't much for 2017+ yet.

[VerusEric]

Originally Posted by derekbrz24

What rear spats are on the car?

I believe Daniel runs our rear spats.

Originally Posted by Brink

Can you confirm your splitter requires the support rods to be installed on a 2017 BRZ? Yours was a product I liked the looks of (particularly with the added endplates), and I liked for previous model years that there was the option of installing without support rods for <90 MPH, or with rods for greater speeds. It seems due to changes to the front end of the 2017 model year the mounting points now require the support rods for all installations. Is this true? I don't like the idea of drilling into the front crash beam to install this if that is the case, so I'll probably end up going in a different direction. Right now the APR front air dam (and other aero kit) is at the top of my list but I'm waiting a bit longer to see if anything else becomes available since there isn't much for 2017+ yet.

The front support rods are necessary on the 2017+ GT86 and BRZ due to the forces the front splitter sees at anything above 80ish MPH. The previous generations were able to have mounting on the bumper further forward which could handle the forces up to 100MPH. The newer generations have mounting very far rearward, the support rods allow the front splitter to handle the load.

Hope that helps make sense of everything. The drilling is minimal and 100's of people have done it so far. If you want a front splitter that produces reasonable amounts of downforce, you'll need to figure out a way to connect the splitter (any brand) to a support structure on the front of the vehicle (crash beam, rad support, etc).

Thanks,
Eric

[ILLSMOQ]

Originally Posted by TachyonBomb

Welcome to my hell!

The only companies with 2017+ lips are:

APR
Chargespeed
STI and STI reproductions
AIMGAIN (The lip will look weird alone, needs the accompanying front bumper (side burn) wide body extensions)

*VIS Racing said they are looking to make a 17+ brz lip in the future.

*I think the URAS front lip may be able to fit the 2017+ brz. But someone should test fit this just to confirm.

Companies that have made 2017+ 86 lips:

Rallybacker
Greddy
Chargespeed
Stance Nation x Aimgain collaboration
TRD (Looks bad ass if you get the LED lights option)
Grazio
Modellista
Garage Vary
VIS Racing
Battle Aero
C-West
Silk Blaze
TOM'S

Seibon is currently working on an 86 lip



The 2017+ BRZ are getting shafted pretty hard when it comes to things specific to just the 2017+BRZ.
IE:
- Front fog/led lighting options
- Lips
- Bumper mustache options
- Canards
- Fog light bezel options
- Brake options which explicitly state (For Performance Package/Brembo)
- Brake options that cater to the factory brembos
- Wing/Trunk-lip options which work with the limited models wing mounting -
- points or modify the existing wing
- Springs that where created using the SACHS dampers
- Things that revolve around the changes made with the intake manifold (oil cooler sandwich line connections, intakes, throttle bodies) **Should be noted that this last area is getting worked on faster than the others**

Things which overlap both the 2017+ BRZ and 2017+ 86 get pushed out a bit quicker.

IE:
- Axleback exhausts
- Head/Tail Lights
- Tuning updates
- Supercharger/Turbo options
- Front Splitters
- Interior trim (Fingers crossed for a carbon fiber 2017+ steering wheel)

Though it should be noted that the BRZ/86 model updates have only been around for a little over a year while the older models have been around for about 6 years now.

Thank you

[TachyonBomb]

BRZ list updated.

After 7 months only new lips offered for the 2017+ BRZ are the FT86 speed factory reproductions of the sti & chargespeed style lips along with S-Craft offering a new style of lip.

Also I came across an IKON style lip on ebay. They seem to have reproduced one of the IKON style lips but made the upper part mold to the bottom of the 17+ bumper.