Cess's Greddy turbo kit

[Mathewgzlz]

dyno please

[Fonzi]

Kit looks nice man!! Finally some more Forced induction in New England. I have Full Blowns kit and I live up in Hampton. We should race up at New England Drag Way. Put these kits to the test.

Are you running 93 or e-85?

[Cessblood]

Originally Posted by Fonzi

Kit looks nice man!! Finally some more Forced induction in New England. I have Full Blowns kit and I live up in Hampton. We should race up at New England Drag Way. Put these kits to the test.

Are you running 93 or e-85?

Right now I'm on 93 pump. What about you and when are you going to New England Drag Way?
Post up pictures of your full blown kit. I want to see it.

[Fonzi]

I run e-85. I drive down to Chelsea to get it. Here are some pics I just took

[King Tut]

Originally Posted by Fonzi

I run e-85. I drive down to Chelsea to get it. Here are some pics I just took

You should make a member's journal thread and post your pics in there. What is your best time in the car? I saw you did a 12.4 @ 118 mph in one thread.

[mike the snake]

I really like that boost gauge and housing, can you tell me where you got those?

I'm not willing to give up my AC vent for gauge mounting.

Thanks,

Mike

[Fonzi]

Originally Posted by King Tut

You should make a member's journal thread and post your pics in there. What is your best time in the car? I saw you did a 12.4 @ 118 mph in one thread.

That is my best time so far. I have yet to make it back to the drags. I'm sure i can hit 11's. I still have more psi to run.

Yea thought about making one then got busy with work. Now that work slowed a little I could probably get my act together.

[Cessblood]

Originally Posted by Fonzi

I run e-85. I drive down to Chelsea to get it. Here are some pics I just took

Attachment 51773

Attachment 51774

Attachment 51775

Nice kit. What is the name of the gas station in Chelsea? Who tune your car?

[Cessblood]

Originally Posted by Fonzi

That is my best time so far. I have yet to make it back to the drags. I'm sure i can hit 11's. I still have more psi to run.

Yea thought about making one then got busy with work. Now that work slowed a little I could probably get my act together.

Attachment 51776

I argee. Sometimes I'm too busy to do anything.

[Fonzi]

Originally Posted by Cessblood

Nice kit. What is the name of the gas station in Chelsea? Who tune your car?

LJ did the tuning, I have 1000cc injectors and I had to add an o ring to the fuel pump because injector load was to high so troubleshooted and fixed problem. Because of that I didnt get a good tune. So we used another tune that was set up for 16 psi. which is running stong. I will set up for another tune in the near future. I got all the ecutek software and cable. Was actually going to try and figure out how to set my launch and flat footed shift with ecutek today

There is 3 with in 5 minutes of each other.

Irving is the cheapest. By King Arthurs. When I started filling up jugs a guy came out screaming. Almost had throw down with the guy over e-85. All in all safety issues from higher power wont let them put e-85 in any container/jugs etc.

There is a gas station in Logan. They except Jugs/containers

Shell in Charlestown has e-85 They also except Jugs/containers

[Fonzi]

Originally Posted by Cessblood

I argee. Sometimes I'm too busy to do anything.

Where are you having LJ do your tune?? Should come up to granite state dyno with me. they have 2 dyno's side by side. grab some e-85 and get those numbers in 400's. There was an 89 toyota supra on the dyno when mine was on.. Kinda sick with the new and old school, got a bunch of video. He was hitting 400, If my fuel situation was working could of hit 400. i think it was 337hp was my best. I didnt even grab my sheet.

[Cessblood]

[quote=Fonzi;1222264]LJ did the tuning, I have 1000cc injectors and I had to add an o ring to the fuel pump because injector load was to high so troubleshooted and fixed problem. Because of that I didnt get a good tune. So we used another tune that was set up for 16 psi. which is running stong. I will set up for another tune in the near future. I got all the ecutek software and cable. Was actually going to try and figure out how to set my launch and flat footed shift with ecutek today

There is 3 with in 5 minutes of each other.

Irving is the cheapest. By King Arthurs. When I started filling up jugs a guy came out screaming. Almost had throw down with the guy over e-85. All in all safety issues from higher power wont let them put e-85 in any container/jugs etc.


Thanks for the info. King Arthurs huh LOL? I was in that area other day. I went there once or twice LOL

Originally Posted by Fonzi

Where are you having LJ do your tune?? Should come up to granite state dyno with me. they have 2 dyno's side by side. grab some e-85 and get those numbers in 400's. There was an 89 toyota supra on the dyno when mine was on.. Kinda sick with the new and old school, got a bunch of video. He was hitting 400, If my fuel situation was working could of hit 400. i think it was 337hp was my best. I didnt even grab my sheet.

Toni is E tuning my car. Granite state Dyno. I will check them out. P.M. me your contact info. Did you post your videos up on youtube?

[Fonzi]

No video's I uploaded.. there is one on there of me that someone posted when my car was stock. Pretty funny cuz I found it on youtube last night. Im like " hey that's new england drag, wait thats me" lol

[Cessblood]

That happens. Someone uploaded a video of me at the New England Drag way too but that was 2008.