Issues with Phasetek Wide angle Mirror Install

[Churnobyl]

Update here, for anyone else who has or is considering these. here are the wiring instructions: http://www.phasteksport.com/FR-S-BRZ...rz-mirrors.htm under Installation tab.

I don't know if these were there when @husker741 pointed to that page 2 days ago, and I was too dumb to find them, or if they magically appeared after my email to Phasetek support, either way, wiring diagram available now.

[husker741]

Originally Posted by Churnobyl

Update here, for anyone else who has or is considering these. here are the wiring instructions: http://www.phasteksport.com/FR-S-BRZ...rz-mirrors.htm under Installation tab.

I don't know if these were there when @husker741 pointed to that page 2 days ago, and I was too dumb to find them, or if they magically appeared after my email to Phasetek support, either way, wiring diagram available now.

Yup, those are the ones I posted and spoke about.

It's all good. Sometimes when I'm frustrated I'm blind to things too. Good luck with the wiring!

[husker741]

Originally Posted by Churnobyl

Update here, for anyone else who has or is considering these. here are the wiring instructions: http://www.phasteksport.com/FR-S-BRZ...rz-mirrors.htm under Installation tab.

I don't know if these were there when @husker741 pointed to that page 2 days ago, and I was too dumb to find them, or if they magically appeared after my email to Phasetek support, either way, wiring diagram available now.

Did you get them wired up?

[Churnobyl]

Originally Posted by husker741

Did you get them wired up?

Not yet. Been traveling for work. Won't be home for another week.

[Vides990]

Originally Posted by illicitstylz

Sorry, I mean the stock mirrors had them when I took them out.

Rexspeed does NOT

http://www.ft86speedfactory.com/rexp...ated-1354.html

they do, i have them, so do others.

[illicitstylz]

Originally Posted by Vides990

http://www.ft86speedfactory.com/rexp...ated-1354.html

they do, i have them, so do others.

i guess mine was the old version that didn't have that feature

[husker741]

Originally Posted by Churnobyl

Not yet. Been traveling for work. Won't be home for another week.

When you do them, any chance you could post a DIY?

[CruiseZen]

Originally Posted by illicitstylz

i guess mine was the old version that didn't have that feature

Rexspeed makes two versions of their mirrors, heated and unheated. I have the heated and they work great. The wide angle rear view really helps to eliminate the blind spot so you can see what's going on back there.

[Churnobyl]

Originally Posted by husker741

When you do them, any chance you could post a DIY?

You mean "IF" as in if I'm savvy enough. Otherwise I'm taking it to an electrician, but I'll take an S-load of pictures!

[husker741]

Originally Posted by Churnobyl

You mean "IF" as in if I'm savvy enough. Otherwise I'm taking it to an electrician, but I'll take an S-load of pictures!

I had one of the mods open the original Phastek thread and there wasn't that much help in there. However, I did PDF the entire thread. Now I just need to figure out how to upload the PDF here. Some people have used this video to help them:

[ame="https://www.youtube.com/watch?v=EUIFd_0OpIE"]FR-S / BRZ LED Side Mirror Installation Guide from Diode Dynamics - YouTube[/ame]