The Lexus IS300 (welded) Differential swap. - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

cheeseburger · 08-10-2018, 01:03 PM

This isn’t going to be a how to thread. But more or less my experience with doing this swap on my own Frs. The pros and cons with doing this swap. Tips and advice for the swap and information that will hopefully determine whether or not this modification is right for you.

Obviously this is geared towards drifters.

$$ Let’s talk money $$

The obvious better choice (than a welded differential)

A true 2-way differential $900-1000
Change the gearing (final drive)(ring and pinion)to better suit your needs. $700-900
Labor to have everything properly installed $500-1000

So for A true proper rear end you’re looking at $2100-2900!

The Lexus IS300 open differential (m96)

2001-2005 Lexus is300 open differential A/T or M/T. Part number designation (m96)
Final drive: 3.909 (Frs is 4.10). So you’ll have slightly longer gearing
(I have approximately 3-4 more mph to work with while in 2nd gear on my home track)

$$price$$ you can find a m96 on eBay or in a junkyard from $150-300
If you can weld you can save some cash. If not, expect to pay a professional welder 50-150 to have it welded up.

Total cost $ : $200-$450

The Lexus m96 and the frs/brz differential have very slight differences. But with that being said the m96 is a direct swap with no modifications needed.

However!!

If you plan on replacing the pressed in forward (driveshaft side) bushings. There is a difference in the inner diameter (ID).

Frs id is approximately 60mm
M96 is approximately 57mm

3mm may not seem like a lot. But diff bushing that work for the frs diff will be to big for the Lexus IS300 differential

While doing the swap I also changed my diff mounts to PBM solid mounts. If you have access to a lathe, turning down the pbm aluminum solid mounts from 60mm to 57mm is easy as pie. You could even use a bolt as and arbor to hold the bushing. Mount the bolt to a drill press. And use a file to to remove the necessary material.

Here is a picture for reference.

Pro’s/con’s

Pro’s
-inexpensive
-easy to do
-wheels will lock no matter what
-will make drifting easier/better
-great for a budget drift car

Con’s
-it’s a welded differential
-it’s noisy
-it’s clunky
-it will put additional stress on other driveline components (DS,axles,clutch)
-tight turning is annoying
-not a great idea for a daily driven car
-did I mention it’s noisy?

So you’ll have to prioritize what you want from your car before making this change. However you can literally swap our differentials out in about an hour.

Hope this hase been helpful. Dan @_southwell_86

IS300 diff pre welded.

After the IS300 diff was welded.

Lexus is300 diff with modified PBM solid bushing installed. Not that the side shafts are removed and our oem axles take thier place.

Is300 diff mounted to Frs subframe. Note that the side shafts have been removed from the is300 diff

Pre IS300 diff and subframe refresh.

Finished product.

Hope this helps some of you guys out!

Party on!

Sonic86 · 08-15-2018, 12:15 PM

Sweet!!! But... I'm only concerned about the final drive ratio difference.
Especially on 2017+ manual 86/BRZ cause stock diff has 4.3 final drive and IS300 has a 3.9 one...
Any issues with the TC/ABS/VSC?
The ECU speed sensor gets the signal from the transmission output shaft right?
At the same time (as I understand) the ABS is monitoring each wheel separately by the signals from the wheel speed sensors..
Will that speed difference make the ECU to freak out?
The difference between 4.3 and 3.9 is 9.3% seems a bit to high...

Trueweltall · 08-15-2018, 12:56 PM

Swap out the final drive for the one you want.

mkivsoopra · 08-15-2018, 01:14 PM

Quote:

Originally Posted by Sonic86

Sweet!!! But... I'm only concerned about the final drive ratio difference.
Especially on 2017+ manual 86/BRZ cause stock diff has 4.3 final drive and IS300 has a 3.9 one...
Any issues with the TC/ABS/VSC?
The ECU speed sensor gets the signal from the transmission output shaft right?
At the same time (as I understand) the ABS is monitoring each wheel separately by the signals from the wheel speed sensors..
Will that speed difference make the ECU to freak out?
The difference between 4.3 and 3.9 is 9.3% seems a bit to high...

No, speed signal only comes from the individual wheel speed sensors. I have a 5.29 final drive and ABS/TC/VSC works.

cheeseburger · 08-15-2018, 01:20 PM

Quote:

Originally Posted by Sonic86

Sweet!!! But... I'm only concerned about the final drive ratio difference.
Especially on 2017+ manual 86/BRZ cause stock diff has 4.3 final drive and IS300 has a 3.9 one...
Any issues with the TC/ABS/VSC?
The ECU speed sensor gets the signal from the transmission output shaft right?
At the same time (as I understand) the ABS is monitoring each wheel separately by the signals from the wheel speed sensors..
Will that speed difference make the ECU to freak out?
The difference between 4.3 and 3.9 is 9.3% seems a bit to high...

I have had zero issues relative to what you’re asking about. But with that said I do run the beattronix box thingy.

cheeseburger · 08-15-2018, 01:24 PM

Quote:

Originally Posted by mkivsoopra

No, speed signal only comes from the individual wheel speed sensors. I have a 5.29 final drive and ABS/TC/VSC works.

Who makes a 5.29 fd??

mkivsoopra · 08-15-2018, 02:53 PM

Quote:

Originally Posted by cheeseburger

Who makes a 5.29 fd??

Weir Performance

Joesurf79 · 08-15-2018, 04:14 PM

Quote:

Originally Posted by cheeseburger

Who makes a 5.29 fd??

Nitro Gear does as well IIRC. About to install one of their 4.88 kits.

fika84 · 08-15-2018, 06:26 PM

Quote:

Originally Posted by Joesurf79

Nitro Gear does as well IIRC. About to install one of their 4.88 kits.

I love my 4.88!

86MLR · 12-21-2018, 07:09 AM

Quote:

Originally Posted by fika84

I love my 4.88!

Question if I may

Would that be the 1992-95 Toyota 4runner ring and pinion?

ermax · 12-21-2018, 08:44 AM

I have an IS300 5MT that originally had an open diff which I swapped for an LSD. I'd be willing to sell the open diff for $150 if someone is in Jacksonville and wants to pick it up. Not sure what it would cost to ship an ~85lbs diff.

fika84 · 12-21-2018, 03:20 PM

Quote:

Originally Posted by 86MLR

Question if I may

Would that be the 1992-95 Toyota 4runner ring and pinion?

I really don't know if it's the same.. You would have to ask Weir Performance or check part numbers..

I was trying to find this out by looking at part numbers myself back then and couldn't find any conclusive evidence that they were the same..

MaryDorifto88 · 04-19-2019, 03:39 AM

Pictures are gone dude

Could you upload them again? :-)

08-10-2018, 01:03 PM	#1
cheeseburger IG: @_southwell_86 Join Date: Nov 2015 Drives: Rwd Prius. Location: orange county new york Posts: 118 Thanks: 6 Thanked 35 Times in 17 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	The Lexus IS300 (welded) Differential swap. This isn’t going to be a how to thread. But more or less my experience with doing this swap on my own Frs. The pros and cons with doing this swap. Tips and advice for the swap and information that will hopefully determine whether or not this modification is right for you. Obviously this is geared towards drifters. $$ Let’s talk money $$ The obvious better choice (than a welded differential) A true 2-way differential $900-1000 Change the gearing (final drive)(ring and pinion)to better suit your needs. $700-900 Labor to have everything properly installed $500-1000 So for A true proper rear end you’re looking at $2100-2900! The Lexus IS300 open differential (m96) 2001-2005 Lexus is300 open differential A/T or M/T. Part number designation (m96) Final drive: 3.909 (Frs is 4.10). So you’ll have slightly longer gearing (I have approximately 3-4 more mph to work with while in 2nd gear on my home track) $$price$$ you can find a m96 on eBay or in a junkyard from $150-300 If you can weld you can save some cash. If not, expect to pay a professional welder 50-150 to have it welded up. Total cost $ : $200-$450 The Lexus m96 and the frs/brz differential have very slight differences. But with that being said the m96 is a direct swap with no modifications needed. However!! If you plan on replacing the pressed in forward (driveshaft side) bushings. There is a difference in the inner diameter (ID). Frs id is approximately 60mm M96 is approximately 57mm 3mm may not seem like a lot. But diff bushing that work for the frs diff will be to big for the Lexus IS300 differential While doing the swap I also changed my diff mounts to PBM solid mounts. If you have access to a lathe, turning down the pbm aluminum solid mounts from 60mm to 57mm is easy as pie. You could even use a bolt as and arbor to hold the bushing. Mount the bolt to a drill press. And use a file to to remove the necessary material. Here is a picture for reference. Pro’s/con’s Pro’s -inexpensive -easy to do -wheels will lock no matter what -will make drifting easier/better -great for a budget drift car Con’s -it’s a welded differential -it’s noisy -it’s clunky -it will put additional stress on other driveline components (DS,axles,clutch) -tight turning is annoying -not a great idea for a daily driven car -did I mention it’s noisy? So you’ll have to prioritize what you want from your car before making this change. However you can literally swap our differentials out in about an hour. Hope this hase been helpful. Dan @_southwell_86 IS300 diff pre welded. After the IS300 diff was welded. Lexus is300 diff with modified PBM solid bushing installed. Not that the side shafts are removed and our oem axles take thier place. Is300 diff mounted to Frs subframe. Note that the side shafts have been removed from the is300 diff Pre IS300 diff and subframe refresh. Finished product. Hope this helps some of you guys out! Party on! __________________ 2013 frs I 🖤 drifting. https://youtu.be/XW5XBQuLDUM IG: @_southwell_86

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Lexus IS300 M85 3.73 LSD differential	TRACE_on	Want-To-Buy Requests	3	03-28-2017 05:09 PM
Lexus is300 diff swap M98 3.91	ogrowup	Engine, Exhaust, Transmission	5	02-28-2017 10:45 AM
WTB M85 IS300 differential	slicktop	Want-To-Buy Requests	0	11-11-2014 05:41 AM
WEIR Performance 4.56 FD & IS300 LSD Rear Differential	SportInjected	Transmission and Driveline	3	08-09-2014 09:36 AM
vs Lexus IS300?	SteelReign	FR-S / BRZ vs....	38	03-27-2012 11:48 AM

08-15-2018, 12:15 PM	#2
Sonic86 Member Join Date: Feb 2017 Drives: 2017 Toyota 86 MT White Drift Spec Location: Los Angeles Posts: 22 Thanks: 0 Thanked 7 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Sweet!!! But... I'm only concerned about the final drive ratio difference. Especially on 2017+ manual 86/BRZ cause stock diff has 4.3 final drive and IS300 has a 3.9 one... Any issues with the TC/ABS/VSC? The ECU speed sensor gets the signal from the transmission output shaft right? At the same time (as I understand) the ABS is monitoring each wheel separately by the signals from the wheel speed sensors.. Will that speed difference make the ECU to freak out? The difference between 4.3 and 3.9 is 9.3% seems a bit to high...

08-15-2018, 12:56 PM	#3
Trueweltall Senior Member Join Date: Feb 2016 Drives: 2016 Subaru BRZ Location: Florida Posts: 394 Thanks: 91 Thanked 195 Times in 115 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Swap out the final drive for the one you want.

12-21-2018, 08:44 AM	#11
ermax Senior Member Join Date: Sep 2017 Drives: 2022 BRZ Limited Silver Location: Jacksonville, FL Posts: 2,532 Thanks: 882 Thanked 2,045 Times in 1,188 Posts Mentioned: 68 Post(s) Tagged: 0 Thread(s)	I have an IS300 5MT that originally had an open diff which I swapped for an LSD. I'd be willing to sell the open diff for $150 if someone is in Jacksonville and wants to pick it up. Not sure what it would cost to ship an ~85lbs diff.

04-19-2019, 03:39 AM	#13
MaryDorifto88 Junior Member Join Date: Dec 2014 Drives: GT86 Location: Germany Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Pictures are gone dude Could you upload them again? :-)

User Name		Remember Me?
Password