Gauging interest in Plug n Play option for BRZ Boomerang to turn ON with DRLs.... - Page 65 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

unsurety · 03-06-2015, 07:45 PM

How do I get in on this list? I've been following since this thread started! I had no idea there finally was a module.

I would like stock behavior

Husker BRZ · 03-06-2015, 07:54 PM

Quote:

Originally Posted by unsurety

How do I get in on this list? I've been following since this thread started! I had no idea there finally was a module.

I would like stock behavior

You just have to go here and order:

http://www.diodedynamics.com/store/c.../category/814/

unsurety · 03-06-2015, 08:00 PM

Quote:

Originally Posted by Husker BRZ

You just have to go here and order:

http://www.diodedynamics.com/store/c.../category/814/

crap, I was googling it but couldn't find it. Thank you.

TIE Pilot · 03-06-2015, 08:02 PM

Quote:

Originally Posted by unsurety

How do I get in on this list? I've been following since this thread started! I had no idea there finally was a module.

I would like stock behavior

Order online -
I ordered on 2/17 just got email of shipment today 3/7 .- est. delivery 3/12

http://www.diodedynamics.com/store/c.../category/814/

Sent from my iPhone using Tapatalk

btoast · 03-06-2015, 10:58 PM

Quote:

Originally Posted by amaciose

For those that can't view the functionality due to the parking brake, here's what I ended up doing: Set up your GoPro in front facing the car and view the camera remotely through your phone. If you don't have a GoPro, you can find a way to prop up your camera facing the car and record a video.

Thankfully, mine worked perfectly out of the box!

I just put a brick behind each front tire. Then you can disengage the e-brake without the car rolling away.

Burrcold · 03-06-2015, 11:06 PM

Ordered!

Trap63 · 03-07-2015, 03:38 PM

Service message for Diode Dynamics and for all users of "Always ON":

I INFORM YOU THAT IS POSSIBLE TO INSTALL brown relay OPENING THE FUSE BOX BY THE ENGINE SIDE.
You can see a little side and slide panel (red square in pic) along height of fuse box. Open it (from bottom to upper side) and you can avoid to stretch the little black wire onto cover of fuse box.
Install relay and insert black wire inside the fuse box.

Nick, Paul !!!!! installed and all is gone very well on EDM BRZ!.

Diode Dynamics · 03-07-2015, 05:32 PM

Thanks for everyone's continued patience. We shipped a bunch last week, and we expect to be caught up and stocked for immediate shipment by the end of this coming week. Finally!

Glad to see that most of you are getting perfect functionality right out of the box. If you think you do have a problem, please double-check that your stock DRL is activated (without the module) and then contact us if you're still seeing issues. Thanks!

Blue-Sensei · 03-07-2015, 07:25 PM

Quote:

Originally Posted by Diode Dynamics

Thanks for everyone's continued patience. We shipped a bunch last week, and we expect to be caught up and stocked for immediate shipment by the end of this coming week. Finally!

Glad to see that most of you are getting perfect functionality right out of the box. If you think you do have a problem, please double-check that your stock DRL is activated (without the module) and then contact us if you're still seeing issues. Thanks!

I started my rma on 2/26 but it's since just been put to preorder status...
Order # 11222124. So by the end of this week then(3/13)?

Trap63 · 03-08-2015, 09:56 AM

better solution for wire

Elkton86er · 03-08-2015, 04:22 PM

Installed mine today. Worked great right out of the box. I saw @Trap63's note about the black relay wire after I was done. Went back and took a look and I think in my case the way I've got things tied up I need the black wire to be a few cm longer for it to work better via the engine side. When you slide the side panel back on it will tend to pull on the wire. I decided to put it back the way I had it - I used a little piece of electrical tape to both protect the wire and lodge it into a groove to keep the wire in place as the fuse box lid is replaced.

Thanks @DiodeDynamics for a great product!

TIE Pilot · 03-09-2015, 05:09 PM

As advertised. Thanks @DiodeDynamics and @Trap63 for the "better solution"
Sent from my iPhone using Tapatalk

996garage · 03-09-2015, 11:31 PM

I appear to be having the same problem. (ordered on 2/17, and arrived today) I performed the simple install, and neither the DRL or boomerang come on unless I switch on the lights.

As you recommended, I removed the brown relay and replaced the stock one back, and now it works just like normal OEM. While testing I had the car running in neutral with parking brake off(brick behind wheels).

Forgot to add that the DRL's did come on now with the lights turned on.

Quote:

Originally Posted by Diode Dynamics

Please reinstall the factory relay, and try turning on your DRLs.

Just as we've mentioned to the others above, this module does not affect the stock DRL function in any way, it just also sends the power to boomerangs.

If your DRLs are not coming on at all during the day as DRLs, you do not have them switched on. Thanks!

was385 · 03-10-2015, 12:10 PM

Quote:

Originally Posted by Blue-Sensei

I started my rma on 2/26 but it's since just been put to preorder status...
Order # 11222124. So by the end of this week then(3/13)?

I ordered mine on 2/14 and still haven't received a working one if it makes you feel any better about your wait time.

03-06-2015, 11:06 PM	#902
Burrcold Senior Member Join Date: Jul 2010 Drives: Subaru BRZ Limited Location: Toronto, Canada Posts: 2,624 Thanks: 763 Thanked 1,586 Times in 776 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	Ordered! __________________

03-07-2015, 03:38 PM	#903
Trap63 Senior Member Join Date: Apr 2013 Drives: Brz WRB - Europe LHD Location: TURIN - Piedmont - ITALY Posts: 921 Thanks: 1,163 Thanked 834 Times in 288 Posts Mentioned: 40 Post(s) Tagged: 1 Thread(s)	Service message for Diode Dynamics and for all users of "Always ON": I INFORM YOU THAT IS POSSIBLE TO INSTALL brown relay OPENING THE FUSE BOX BY THE ENGINE SIDE. You can see a little side and slide panel (red square in pic) along height of fuse box. Open it (from bottom to upper side) and you can avoid to stretch the little black wire onto cover of fuse box. Install relay and insert black wire inside the fuse box. Nick, Paul !!!!! installed and all is gone very well on EDM BRZ!. Attached Images __________________

03-07-2015, 05:32 PM	#904
Diode Dynamics Join Date: Aug 2012 Drives: 2013 Scion FR-S Location: St. Louis, Missouri Posts: 2,770 Thanks: 1,503 Thanked 1,761 Times in 877 Posts Mentioned: 197 Post(s) Tagged: 5 Thread(s)	Thanks for everyone's continued patience. We shipped a bunch last week, and we expect to be caught up and stocked for immediate shipment by the end of this coming week. Finally! Glad to see that most of you are getting perfect functionality right out of the box. If you think you do have a problem, please double-check that your stock DRL is activated (without the module) and then contact us if you're still seeing issues. Thanks! __________________ John C. Diode Dynamics Follow Us: FB // IG // YT // TikTok

03-08-2015, 09:56 AM	#906
Trap63 Senior Member Join Date: Apr 2013 Drives: Brz WRB - Europe LHD Location: TURIN - Piedmont - ITALY Posts: 921 Thanks: 1,163 Thanked 834 Times in 288 Posts Mentioned: 40 Post(s) Tagged: 1 Thread(s)	better solution for wire __________________

03-08-2015, 04:22 PM	#907
Elkton86er Member Join Date: Oct 2014 Drives: 2014 Subaru BRZ Limited WRB AT Location: Elkton, MD USA Posts: 94 Thanks: 94 Thanked 24 Times in 21 Posts Mentioned: 2 Post(s) Tagged: 2 Thread(s)	Installed mine today. Worked great right out of the box. I saw @Trap63's note about the black relay wire after I was done. Went back and took a look and I think in my case the way I've got things tied up I need the black wire to be a few cm longer for it to work better via the engine side. When you slide the side panel back on it will tend to pull on the wire. I decided to put it back the way I had it - I used a little piece of electrical tape to both protect the wire and lodge it into a groove to keep the wire in place as the fuse box lid is replaced. Thanks @DiodeDynamics for a great product! __________________ 2014 Subaru BRZ Limited WRB AT Cosworth Drop-In Air Filter, Diode Dynamics DRL module, Perrin Tips

03-09-2015, 05:09 PM	#908
TIE Pilot Senior Member Join Date: Sep 2012 Drives: TIE interceptor; BRZ13 Location: Miami Posts: 309 Thanks: 131 Thanked 132 Times in 88 Posts Mentioned: 18 Post(s) Tagged: 3 Thread(s)	As advertised. Thanks @DiodeDynamics and @Trap63 for the "better solution" Sent from my iPhone using Tapatalk Attached Images __________________ "Speed has never killed anyone. Suddenly becoming stationary, that's what gets you." Jeremy Clarkson Last edited by TIE Pilot; 03-10-2015 at 06:38 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Closed] Gauging Interest thread	pansontw	Cosmetic Modification (Interior/Exterior/Lighting)	49	08-27-2014 03:14 PM
So has anyone managed to get the BRZ Boomerang/parking lights to operate as DRLs?	gt8613	BRZ First-Gen (2012+) -- General Topics	18	04-27-2014 02:09 AM
Gauging Interest	ISC Suspension	Announcements, Contests, Giveaways	17	04-03-2014 09:44 AM
Jdm headlights - gauging interest	Hawk77FT	Exterior Parts (Aero, Lighting, Etc.)	7	03-31-2014 09:38 AM
FS: Oil Pressure gauge (includes Block galley plug for free!) True plug and play!	Sportsguy83	Engine, Exhaust, Bolt-Ons	10	08-30-2013 10:53 AM

User Name		Remember Me?
Password