follow ft86club on our blog, twitter or facebook.
FT86CLUB
Ft86Club
Delicious Tuning
Register Garage Members List Calendar Search Today's Posts Mark Forums Read

Go Back   Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB > Technical Topics > Suspension | Chassis | Brakes -- Sponsored by 949 Racing

Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing.


User Tag List

Reply
 
Thread Tools Search this Thread
Old 03-20-2019, 10:48 AM   #29
wparsons
Senior Member
 
wparsons's Avatar
 
Join Date: Jul 2012
Drives: 2013 Asphalt FR-S Manual
Location: Whitby, ON, Canada
Posts: 6,716
Thanks: 7,875
Thanked 3,351 Times in 2,134 Posts
Mentioned: 99 Post(s)
Tagged: 1 Thread(s)
Garage
Quote:
Originally Posted by x808drifter View Post
They specifically recommend having the the rods on cars that will see speeds above 100mph.

That's with their normal mounting system... my question was about using the battle aero chassis mount brackets with the verus one. This bracket attaches further forward on the splitter and is much more rigid than their mounting system. It might still allow too much flex at the very front though.
__________________
Light travels faster than sound, so people may appear to be bright until you hear them speak...
flickr

Last edited by wparsons; 03-20-2019 at 10:58 AM.
wparsons is offline   Reply With Quote
The Following User Says Thank You to wparsons For This Useful Post:
x808drifter (03-20-2019)
Old 03-21-2019, 09:39 PM   #30
turnswrench
Straight Line Driver
 
turnswrench's Avatar
 
Join Date: Feb 2019
Drives: 2018 BRZ Premium
Location: MN
Posts: 14
Thanks: 1
Thanked 20 Times in 9 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
As an update, it's still on the car. I've gotten it wet as well and so far no issues or sagging. Battle Aero did end up sending me hardware for the winglets, but I had already purchased hardware to move the project forward.

Advice, keep the washer fluid tank unbolted and out of the way longer than you think you should. lol I ended up uninstalling it twice bc I moved too fast. I left the inner fender wells installed on my car and cut small slits in the liner for the outer brackets to mount through. I painted the exposed part of the wood with a black paint marker, looks 10x better.
__________________
2018 BRZ Premium Road Car Project
-IRP, Torque Solutions, MTEC, Grimmspeed, Battle Areo
2018 Procharged Mustang GT Drag Car Project
2019 Grand Cherokee Trailhawk Tow Rig
turnswrench is offline   Reply With Quote
Old 03-21-2019, 11:31 PM   #31
NoHaveMSG
Senior Member
 
NoHaveMSG's Avatar
 
Join Date: Jan 2018
Drives: Crapcan
Location: Oregon
Posts: 11,119
Thanks: 18,091
Thanked 16,254 Times in 7,347 Posts
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Garage
Quote:
Originally Posted by Setgo View Post
It's interesting that is made of wood. Mainly because on the website on modinfinite, it states its made out of "ABS composite material
I hope it is not actually ABS, even if it is an abs composite. ABS is horrible with UV and chemicals. It is especially prone to being eaten by glycol based fluids.
NoHaveMSG is online now   Reply With Quote
Old 03-22-2019, 01:23 PM   #32
VIP BRZ
Senior Member
 
VIP BRZ's Avatar
 
Join Date: Mar 2016
Drives: 2014 Subaru BRZ
Location: CA - San Fernando Valley
Posts: 492
Thanks: 242
Thanked 333 Times in 179 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by turnswrench View Post
As an update, it's still on the car. I've gotten it wet as well and so far no issues or sagging. Battle Aero did end up sending me hardware for the winglets, but I had already purchased hardware to move the project forward.

Advice, keep the washer fluid tank unbolted and out of the way longer than you think you should. lol I ended up uninstalling it twice bc I moved too fast. I left the inner fender wells installed on my car and cut small slits in the liner for the outer brackets to mount through. I painted the exposed part of the wood with a black paint marker, looks 10x better.
So you just took off the plastic covering all together (the one that comes in a roll) and painted the exposed sides?
VIP BRZ is offline   Reply With Quote
Old 03-22-2019, 06:40 PM   #33
turnswrench
Straight Line Driver
 
turnswrench's Avatar
 
Join Date: Feb 2019
Drives: 2018 BRZ Premium
Location: MN
Posts: 14
Thanks: 1
Thanked 20 Times in 9 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by VIP BRZ View Post
So you just took off the plastic covering all together (the one that comes in a roll) and painted the exposed sides?
I used that across the leading front edge. Painted everywhere else, like the sides and the rear of it that's in front of the wheels.
__________________
2018 BRZ Premium Road Car Project
-IRP, Torque Solutions, MTEC, Grimmspeed, Battle Areo
2018 Procharged Mustang GT Drag Car Project
2019 Grand Cherokee Trailhawk Tow Rig
turnswrench is offline   Reply With Quote
The Following 2 Users Say Thank You to turnswrench For This Useful Post:
new2subaru (03-23-2019), VIP BRZ (03-22-2019)
Old 03-23-2019, 01:12 AM   #34
leunggary
Member
 
Join Date: Feb 2016
Drives: Scion FRS 2013
Location: Vancouver, CANADA
Posts: 28
Thanks: 2
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
wondering if anyone installed the large one onto a frs/brz stock bumper.. hmm
leunggary is offline   Reply With Quote
Old 05-01-2019, 10:53 PM   #35
jsok2
Member
 
jsok2's Avatar
 
Join Date: Aug 2016
Drives: 2013 SWP Subaru BRZ Limited
Location: Irvine
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by mav1178 View Post
it's funny bc the cover photo on their Facebook page is my old car.

but... I looked at their page, their FB, social media... can't find any address or contact info other than a form. company may be legit but the lack of contact options makes it unappealing. buyer beware.
Hey Alex that is your old car!

I've been putting it to good use. Finally, was able to start doing 86cup events this year~

As for Modinfinite, we are a legit company. We are a dealer of Battle Aero Products and have been promoting their new splitter as someone stated.

We also carry many more products from most of the popular aftermarket car companies.

It's been easier for me to talk to customers through FB so I've been mainly using Messenger to address customer concerns etc.

However, I will try to be more active on the forums!

If anyone has any further questions please let me know! Thanks guys.

-Josh
Modinfinite Sales.
jsok2 is offline   Reply With Quote
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wasp composites chassis mounted splitter 5inch OzzyGT86 Exterior Parts (Aero, Lighting, Etc.) 13 03-09-2018 06:09 PM
Just Added APR front splitter and side splitter Pekingduck Cosmetic Modification (Interior/Exterior/Lighting) 42 08-31-2016 10:22 AM
Wasp Composites Chassis Mounted Splitter DeliciousTuning Cosmetic Modification (Interior/Exterior/Lighting) 62 01-02-2015 02:18 AM
floor mounted pedal mokinbird87 Cosmetic Modification (Interior/Exterior/Lighting) 0 12-09-2014 01:46 PM
Finally got my OFT mounted The Racers Line Software Tuning 14 05-24-2014 01:40 AM


All times are GMT -4. The time now is 09:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.