hoodstruts - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DaJo · 07-08-2018, 02:29 AM

Quote:

Originally Posted by GrimmSpeed

^^^^^ This is the same info I've been waiting on. I don't know if you've had a chance to reply to my sales guy but I had asked if when you unbolt the hood from the hinges do they move freely?

And then my next question was the same about the car being in an accident that may have damaged something, because that hood isn't the same color as the rest of the car. Knowing more about that would certainly help solve this problem.

And the final question I had was about any additional dynamat or anything that would weigh the hood down. To my knowledge there are no steel replacement hoods, but some sort of straight weight modification to the hood was my final thing to look at (which involves weighing the hood, I even provided a target weight).

So trust me, I've been trying to figure this out from day 1, but I haven't got any information back. Seeing the thread and knowing that the car has gone through 4 different sets of hood struts and seeing a different color hood on the car is a clear indicator to me that we need to look elsewhere than the hood struts themselves.

Chase
Engineering

Hi Chase @GrimmSpeed, quick question... Are the nuts holding the struts supposed to rust? It looks like those are the only thing that's rusting on my unit and I don't even winter drive this car...

Sorry OP for hi-jacking the thread.

Sapphireho · 07-08-2018, 10:54 AM

The suspense is killing me. How much does the purple hood weigh?

GrimmSpeed · 07-09-2018, 10:11 AM

I'm still thinking it's going to be something with the hinges, but we'll see!

Quote:

Originally Posted by DaJo

Hi Chase @GrimmSpeed, quick question... Are the nuts holding the struts supposed to rust? It looks like those are the only thing that's rusting on my unit and I don't even winter drive this car...

Are they supposed to rust? No. Can they? Yes. Neither the nut nor the ball stud are stainless so its surprising that the nut has rusted but the ball stud hasn't as they are both clear zinc coated. If you wanted to grab a replacement or a stainless nut locally they're 5/16-18.

Chase
Engineering

humfrz · 07-09-2018, 01:12 PM

Quote:

Originally Posted by Sapphireho

The suspense is killing me. How much does the purple hood weigh?

While we are waiting, why don't you take the hood off your car and weigh it … then we will have a basis of comparison ..

humfrz

humfrz · 07-09-2018, 01:16 PM

Quote:

Originally Posted by womachris

………...

@womachris , while we are waiting, I suggest you take and post some pictures of your struts as they are mounted so we can see both the top and bottom mounts. A picture of each side would be good.

humfrz

humfrz · 07-09-2018, 01:20 PM

Quote:

Originally Posted by GrimmSpeed

….

Are they supposed to rust? No. Can they? Yes. Neither the nut nor the ball stud are stainless so its surprising that the nut has rusted but the ball stud hasn't as they are both clear zinc coated. If you wanted to grab a replacement or a stainless nut locally they're 5/16-18.

Chase
Engineering

Now THAT was a nice response. If it were me, I would just have

ol @DaJo ….

humfrz

womachris · 07-09-2018, 05:42 PM

Sorry everyone, it will be a little while before i am able to weigh the hood. I don't have the time or ability right now. I'm getting sent out of town for work for a month. Will post as soon as i am able. Thanks for all the questions and thoughts.

BasementN3k0 · 07-10-2018, 12:39 AM

Quote:

Originally Posted by womachris

Sorry everyone, it will be a little while before i am able to weigh the hood. I don't have the time or ability right now. I'm getting sent out of town for work for a month. Will post as soon as i am able. Thanks for all the questions and thoughts.

same here lol. i wish i could bring my 86 with me, but fuck these so cal dust storms...

humfrz · 07-10-2018, 12:55 AM

Quote:

Originally Posted by womachris

Sorry everyone, it will be a little while before i am able to weigh the hood. I don't have the time or ability right now. I'm getting sent out of town for work for a month. Will post as soon as i am able. Thanks for all the questions and thoughts.

Well, OK, but what about the pictures I ask for up above, before you go out of town ..

humfrz

ls1ac · 07-10-2018, 06:21 PM

You could disconnect the struts and use a fish scale to measure the weight at the front of the hood in up/down positions.
Any of us without struts can do the same very easily.
An other question I did not see an answer for is did they all work for a while then fail or not work from the start?

Leonardo · 07-10-2018, 06:36 PM

Have you tried sticking a magnet on the hood to see if it is steel?

Yoshoobaroo · 07-10-2018, 08:03 PM

Quote:

Originally Posted by Leonardo

Have you tried sticking a magnet on the hood to see if it is steel?

WIIIIIIIIIIIIIIITCH!

Sapphireho · 07-10-2018, 08:06 PM

Quote:

Originally Posted by Leonardo

Have you tried sticking a magnet on the hood to see if it is steel?

.

norcalpb · 07-10-2018, 08:32 PM

I found some steel hoods online.

https://www.chicagoautobodyparts.com...2013-2014.html

07-10-2018, 06:36 PM	#39
Leonardo Country Boy 4 Life Join Date: Jul 2012 Drives: 19' & 06' Ridgelines, 13' FR-S Location: EUGENE Posts: 5,228 Thanks: 6,719 Thanked 5,291 Times in 2,720 Posts Mentioned: 47 Post(s) Tagged: 1 Thread(s)	Have you tried sticking a magnet on the hood to see if it is steel? __________________ I LIKE TIRES!

07-08-2018, 10:54 AM	#30
Sapphireho ¯\_(ツ)_/¯ Join Date: Mar 2016 Drives: '15 ultramarine Location: Idaho Posts: 13,192 Thanks: 5,451 Thanked 18,240 Times in 8,609 Posts Mentioned: 155 Post(s) Tagged: 0 Thread(s)	The suspense is killing me. How much does the purple hood weigh?

07-09-2018, 05:42 PM	#35
womachris Member Join Date: Jun 2018 Drives: 2013 frs Location: va beach Posts: 10 Thanks: 0 Thanked 3 Times in 3 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Sorry everyone, it will be a little while before i am able to weigh the hood. I don't have the time or ability right now. I'm getting sent out of town for work for a month. Will post as soon as i am able. Thanks for all the questions and thoughts.

07-10-2018, 08:32 PM	#42
norcalpb Senior Member Join Date: Oct 2013 Drives: 2013 BRZ, 2023 Model 3 Location: SF Bay Area Posts: 2,296 Thanks: 1,212 Thanked 861 Times in 570 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	I found some steel hoods online. https://www.chicagoautobodyparts.com...2013-2014.html

User Name		Remember Me?
Password