Greddy EVO 3 Exhaust for the BRZ / FR-S - Page 23 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Gixxersixxerman · 06-11-2013, 12:10 AM

Quote:

Originally Posted by Honeydew

DO you guys know if there is anything we can use to prevent it from rusting?

Maybe having it ceramic coated and a good polish/protector might help.. But metal rusts under the use of salt.. Stainless steel still rusts, unless its the very very expensive type.. Even then I hear it will rust.. There are some people that understand and know all this on here as I've seen them debate the subject.. Hell I've been to the St. Louis arch and seen rust on that and it's suppose to be pure stainless and the best, at least they make it out to be

LeeMaster · 06-11-2013, 12:37 AM

I used VHT Exhaust Manifold paint on mine, should help combat rust a lot more than without. It will eventually rust seeing as how the damn exhaust tip is faced at an angle where if you spray water it will seem to get stuck inside of the exhast.

Minovsky · 06-11-2013, 02:14 AM

The only down side To me for the Eco is that it's those single layered tips. Wish it was like the nameless on the double walled ones.. Just looks abit better.. I guess if it does rust you can get it polished off? Haha Ohwell

FRS_Ken · 07-02-2013, 01:28 PM

My EVO3 didn't come with any silencers/baffles

I love the sound of it without them, to me it sounds like a much bigger engine (like a V8

) sitting in the driver's seat anyway

I swapped out the stock one for the EVO3 with about 200km (120mi) on the dial, so I can't say I really heard the stock except at idle and sub-60mph speeds - still was breaking it in.
My car will never see salty roads (while I own it) since it will go into storage in Nov and awaken in April after the rains wash the salt off the roads.

GOT FR-S · 09-02-2013, 11:58 PM

Quote:

Originally Posted by FRS_Ken

My EVO3 didn't come with any silencers/baffles

I love the sound of it without them, to me it sounds like a much bigger engine (like a V8

) sitting in the driver's seat anyway

I swapped out the stock one for the EVO3 with about 200km (120mi) on the dial, so I can't say I really heard the stock except at idle and sub-60mph speeds - still was breaking it in.
My car will never see salty roads (while I own it) since it will go into storage in Nov and awaken in April after the rains wash the salt off the roads.

Odd. They come pre installed and bolted in. you have to remove them. They are not seperate in the box.

Gixxersixxerman · 09-03-2013, 01:46 AM

I was installing my coil overs a little bit ago and noticed small rust dots all over.. I blued the hell out of the piping from the track, even melted the right rear cut out a little bit.. I'm going to do a complete detail and plan on hitting it with some polish and protectant when I detail.. Let y'all know what happens afterwards..

For the record, I live In The desert.. Was the high desert of SoCal, now Vegas.. There is not much rain and the car has only seen a brief shower that lasted maybe two-three miles.. Otherwise, she's never seen the rain

FRS_Jack · 10-25-2013, 01:13 AM

Hey guys, i might actually go to a shop and cut the silencer pipe and well in some bigger pipe of more sound maybe less drone....

rhythmM · 11-18-2013, 05:32 PM

Super stoked! I just ordered mines last friday, Hopefully the drone isnt so "droney" to me. What are some things you guys have all done to help alleviate to drone?

Foobar · 11-18-2013, 06:03 PM

Quote:

Originally Posted by rhythmM

Super stoked! I just ordered mines last friday, Hopefully the drone isnt so "droney" to me. What are some things you guys have all done to help alleviate to drone?

Either deal with it or switch to another system. To my knowledge, nobody has altered the system to reduce drone. You could possibly get another resonator fabricated and put in somewhere but at that point you have to wonder if it's worth the effort and cost.

Some folks aren't bothered by the drone at all, the rest of us had to move on to other options.

YMMV

Sent from my Nexus 5 using Tapatalk

TRD_86 · 02-08-2014, 04:45 PM

Quote:

Originally Posted by tokiokun717

You need an Alan and 8mm wrench. I don't know if it's just me but those screws are a pain to take out because of the lock nut... I already broke 2 of them on each side so I replaced them with normal nuts. they seem to be working fine

^ sound like a pain, but will try to remove silencer and replace w/ different screws nuts for easy access.

TRD_86 · 02-14-2014, 04:59 AM

Exhaust is little too loud for me w/o silencer. I really like the sound of the silencer on at the moment. I'm thinking of modify the silencer to make it sound little louder by either cutting the silencer tip shorter or drill few perforated holes into the silencer tube that would make the exhaust louder w/ silencer on.

DeLaRage · 02-26-2014, 05:03 PM

Just got my greddy evo 3 in the mail today. I don't think it came with silencers. Granted I was planning on taking them out. But I was hoping to have them so that I could put them in for long drives

AZFA20 · 02-26-2014, 05:07 PM

Quote:

Originally Posted by DeLaRage

Just got my greddy evo 3 in the mail today. I don't think it came with silencers. Granted I was planning on taking them out. But I was hoping to have them so that I could put them in for long drives

You will know if you got em. The EVO 3 comes with them already installed in the mufflers and instead of 4" openings you will have little guys.

DeLaRage · 02-26-2014, 05:09 PM

Quote:

Originally Posted by AZFA20

You will know if you got em. The EVO 3 comes with them already installed in the mufflers and instead of 4" openings you will have little guys.

I already opened it. And it had the 4" installed. Nothing inside of them or anything.

06-11-2013, 12:37 AM	#310
LeeMaster Red wine Join Date: Oct 2012 Drives: Subaru BRZ(R.I.P) Location: Denied Posts: 1,176 Thanks: 1,268 Thanked 342 Times in 240 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	I used VHT Exhaust Manifold paint on mine, should help combat rust a lot more than without. It will eventually rust seeing as how the damn exhaust tip is faced at an angle where if you spray water it will seem to get stuck inside of the exhast. __________________

02-14-2014, 04:59 AM	#319
TRD_86 Senior Member Join Date: Jun 2012 Drives: 2013 86 white Location: ca Posts: 725 Thanks: 69 Thanked 129 Times in 93 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Exhaust is little too loud for me w/o silencer. I really like the sound of the silencer on at the moment. I'm thinking of modify the silencer to make it sound little louder by either cutting the silencer tip shorter or drill few perforated holes into the silencer tube that would make the exhaust louder w/ silencer on. Last edited by TRD_86; 02-14-2014 at 01:46 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Greddy Evo 3 exhaust pre-order!	No Limit Motorsport	Engine, Exhaust, Bolt-Ons	132	10-17-2012 09:30 AM
Magnaflow or Greddy Exhaust	86 FRS	Southern California	3	09-13-2012 06:30 PM
Greddy SP Elite Exhaust	Willsonk	Engine, Exhaust, Transmission	67	09-03-2012 10:19 PM
Greddy SP Elite Exhaust	Willsonk	Engine, Exhaust, Transmission	5	08-02-2012 01:18 PM
greddy exhaust	jdmboss86	Engine, Exhaust, Transmission	15	06-17-2012 01:38 AM

06-11-2013, 02:14 AM	#311
Minovsky Senior Member Join Date: May 2012 Drives: Fr-s 2013 white out Location: canada Posts: 843 Thanks: 559 Thanked 111 Times in 96 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	The only down side To me for the Eco is that it's those single layered tips. Wish it was like the nameless on the double walled ones.. Just looks abit better.. I guess if it does rust you can get it polished off? Haha Ohwell

07-02-2013, 01:28 PM	#312
FRS_Ken ((•\|\|=(86)=\|\|•)) Join Date: Apr 2012 Drives: '13 FR-S Ultramarine 6AT; '13 Yaris Location: Ottawa, Canada Posts: 1,215 Thanks: 979 Thanked 592 Times in 373 Posts Mentioned: 35 Post(s) Tagged: 0 Thread(s)	My EVO3 didn't come with any silencers/baffles I love the sound of it without them, to me it sounds like a much bigger engine (like a V8 ) sitting in the driver's seat anyway I swapped out the stock one for the EVO3 with about 200km (120mi) on the dial, so I can't say I really heard the stock except at idle and sub-60mph speeds - still was breaking it in. My car will never see salty roads (while I own it) since it will go into storage in Nov and awaken in April after the rains wash the salt off the roads.

09-03-2013, 01:46 AM	#314
Gixxersixxerman Senior Member Join Date: Aug 2012 Drives: Toyota GT86, 66 beetle, 11 GSXR 750 Location: Las Vegas, NV. Posts: 1,382 Thanks: 575 Thanked 836 Times in 436 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	I was installing my coil overs a little bit ago and noticed small rust dots all over.. I blued the hell out of the piping from the track, even melted the right rear cut out a little bit.. I'm going to do a complete detail and plan on hitting it with some polish and protectant when I detail.. Let y'all know what happens afterwards.. For the record, I live In The desert.. Was the high desert of SoCal, now Vegas.. There is not much rain and the car has only seen a brief shower that lasted maybe two-three miles.. Otherwise, she's never seen the rain

11-18-2013, 05:32 PM	#316
rhythmM Senior Member Join Date: Oct 2012 Drives: 2014 Subaru BRZ Limited MT - White Location: San Diego, CA Posts: 229 Thanks: 77 Thanked 30 Times in 27 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Super stoked! I just ordered mines last friday, Hopefully the drone isnt so "droney" to me. What are some things you guys have all done to help alleviate to drone?

02-26-2014, 05:03 PM	#320
DeLaRage Member Join Date: Jan 2014 Drives: 2013 Raven FRS Location: Long Island, NY Posts: 64 Thanks: 2 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Just got my greddy evo 3 in the mail today. I don't think it came with silencers. Granted I was planning on taking them out. But I was hoping to have them so that I could put them in for long drives

User Name		Remember Me?
Password