WHAT DID YOU DO TO YOUR BRZ TODAY?

[JS + BRZ]

Originally Posted by Turkish

Lol I bought mine from @Diode Dynamics, I have a 10% off coupon code you can use. I'll PM it to you if you're going to use it.

cool stuff man. let me check it out on his website first! thanks man. looks really good though, really.

[Turkish]

Originally Posted by JS + MS3

cool stuff man. let me check it out on his website first! thanks man. looks really good though, really.

If you do the blinkers, you are going to want to buy the $15 relay to adjust the timing for led bulbs (fixes the hyper blinking when you put the turn signals on).

[Khazzy]

Originally Posted by Turkish

Judge for yourself, this was taken with my cell phone.

http://www.ft86club.com/forums/showp...9&postcount=46

They are awesome. Got mine from Diodedynamics, stage 2. Super bright from stock and look great in the housing too.



just make sure you have a flasher relay with resistors to eliminate hyper blinking after the install if you decide to get some.

[Turkish]

Originally Posted by Khazzy

They are awesome. Got mine from Diodedynamics, stage 2. Super bright from stock and look great in the housing too.



just make sure you have a flasher relay with resistors to eliminate hyper blinking after the install if you decide to get some.

Yea, What @Khazzy said, mine are also Diode Dynamics' stage 2 blinkers with the relay. Love them.

[Diode Dynamics]

Originally Posted by Khazzy

They are awesome. Got mine from Diodedynamics, stage 2. Super bright from stock and look great in the housing too.



just make sure you have a flasher relay with resistors to eliminate hyper blinking after the install if you decide to get some.

Be sure to send us some pictures too!

We have a Car of the Month contest right now. Send your best pictures to Ariel@diodedynamics.com

Nick C.

[2point0]

Those look like Stage 1s to me. I thought Stage 2 had a housing similar to the 3s but without ridges. Am I wrong here?

[brenesk91]

Originally Posted by 2point0

Those look like Stage 1s to me. I thought Stage 2 had a housing similar to the 3s but without ridges. Am I wrong here?

you're correct!

[chanomatik]

@Mach V Dan Thanks from my niece and I for the great price shipped to Alaska on the WeatherTechs!


@Diode Dynamics Thanks for the logo replacements! My brother shaved them down just a tad to help them fit better. I think they would've stayed down fine with just the tape, but my brother is meticulous.

[Diode Dynamics]

Originally Posted by chanomatik

@Diode Dynamics Thanks for the logo replacements! My brother shaved them down just a tad to help them fit better. I think they would've stayed down fine with just the tape, but my brother is meticulous.

It's something we've gone back and forth on. The bottom of the weathertech "slot" is beveled, meaning if you put them in without the tape, they might seem barely too big. If you put them with the .8mm of tape, it lifts it up just enough so that it fits correctly, right to the edges. If we made it smaller so it fit perfectly without the tape, you'd have a .5mm gap around the edges if you did end up using the tape.

We've literally spent hours deciding whether or not to make them .5mm smaller or bigger.

Sigh.

-Paul, product development

[JS + BRZ]

That weathertech mat with STI logo actually looks pretty sweet. Hmmm.... too bad Socal is pretty much always sunny.

[chanomatik]

Originally Posted by Diode Dynamics

It's something we've gone back and forth on. The bottom of the weathertech "slot" is beveled, meaning if you put them in without the tape, they might seem barely too big. If you put them with the .8mm of tape, it lifts it up just enough so that it fits correctly, right to the edges. If we made it smaller so it fit perfectly without the tape, you'd have a .5mm gap around the edges if you did end up using the tape.

We've literally spent hours deciding whether or not to make them .5mm smaller or bigger.

Sigh.

-Paul, product development

That's why I said that my brother was meticulous. I'm way more relaxed. I saw that it bowed and thought, "Well, the tape should help with that." Even my mom looked at it and was the same way. My brother, however, is a hands-on construction kind of guy (you can see it in his dirty fingernails), so he saw that and was like, "Oh no, this NEEDS to be fixed." haha It's all good. I totally see how it would be tough to decide. I'd rather have the option to shave it down myself, honestly. It's beautiful and everyone I've shown pictures of it to has loved it. Thanks again!

[chanomatik]

Originally Posted by JS + MS3

That weathertech mat with STI logo actually looks pretty sweet. Hmmm.... too bad Socal is pretty much always sunny.

33.5k miles on the BRZ, mostly in crappy Alaskan weather, and I'm just now getting all-weather floor mats, so I understand your reasoning. If anything they're good to have for any kind of accidental spills or to reduce any chance of slipping. Just some food for thought!

[JS + BRZ]

Originally Posted by chanomatik

33.5k miles on the BRZ, mostly in crappy Alaskan weather, and I'm just now getting all-weather floor mats, so I understand your reasoning. If anything they're good to have for any kind of accidental spills or to reduce any chance of slipping. Just some food for thought!

I'm just making an excuse to not buy this brother...

[chanomatik]

Originally Posted by JS + MS3

I'm just making an excuse to not buy this brother...

I just calculated total price shipped to you (LA area): $119.76.

You're welcome!