DIY Day

[PradiG]

Originally Posted by BRZtoni

i have a harness bar and ordering a seatbelt harness

wont be installing until subaru calls me back to pick up my
both side b pillar trim so i can drill a hole to make it look more clean with the harness bar installed

When's the next DIY day?

[BRZtoni]

Originally Posted by swarb

@BRZtoni what brackets did you end up using? Are they centered to the steering wheel? even stock, the seat is to the left a little bit.

buddy club super low seat rails. i dont know never bothered checking
if its centered. seems centered.

[BRZtoni]

Originally Posted by PradiG

When's the next DIY day?

not too sure got to talk to @LXXXV1

[ryoma]

also, does your status seats have holes for side mounting? I saw a vendor on here selling packages for the status seats and I like how they're customizable. I definitely want mine in alcantera lol, but I also want to side mount them and not put them on rails. and maybe swap over the seat warmers too but I doubt I will even use it in this weather

[VIC_BRZ]

I'm thinking about getting a backup cam. Do any of you guys have one installed and have any recommendations?

[ryoma]

Originally Posted by VIC_BRZ

I'm thinking about getting a backup cam. Do any of you guys have one installed and have any recommendations?

I have the Rydeen duo. it has a full metal body and is pretty solidly built. since you drive a BRZ, you don't need to do anything aside from buying an adapter and the camera. the FRS guys need to add in a reverse trigger. here are some pictures from when I installed mine: http://www.ft86club.com/forums/showp...9&postcount=59

[sillierabbit]

Originally Posted by VIC_BRZ

I'm thinking about getting a backup cam. Do any of you guys have one installed and have any recommendations?

My brother @LXVVV1 has it installed. He can chime in.

[tinma]

Interested in backup cam as well

[VIC_BRZ]

Originally Posted by ryoma

I have the Rydeen duo. it has a full metal body and is pretty solidly built. since you drive a BRZ, you don't need to do anything aside from buying an adapter and the camera. the FRS guys need to add in a reverse trigger. here are some pictures from when I installed mine: http://www.ft86club.com/forums/showp...9&postcount=59

Thanks I'll look into that, sounds like really simple install.

[LXXXV1]

Originally Posted by VIC_BRZ

I'm thinking about getting a backup cam. Do any of you guys have one installed and have any recommendations?

I have the Beat Sonic BCAM7 and the BCUS3 harness. Really easy install, plug and play. Bit pricey imo but I got it during special event pricing.

[VIC_BRZ]

Has anyone installed the whiteline KDT922 kit, its the bushing inserts for the rear subframe. With the bushings in I can't get the rear bolts to lineup, but if I take them out the bolts go right in.

[nova.86]

Any chances of there being one soon? Just ordered a front pipe lol

[BRZtoni]

Originally Posted by nova.86

Any chances of there being one soon? Just ordered a front pipe lol

Ill be installing ap racing big brake kit very soon before track day.
will be needing someone to help me bleed calipers

I can help you with the front pipe. Ill be be free 2 weeks from now ill be in maryland and newyork next weekend.

[LXXXV1]

Originally Posted by VIC_BRZ

Has anyone installed the whiteline KDT922 kit, its the bushing inserts for the rear subframe. With the bushings in I can't get the rear bolts to lineup, but if I take them out the bolts go right in.

Never considered installing these. Ever figure it out? Would be interested in your solution.

Originally Posted by nova.86

Any chances of there being one soon? Just ordered a front pipe lol

Front pipe is easy. Make sure you have new gaskets, unless you don't mind running the risk of reusing your old ones. 1-2hr job, to let pipes cool down. If you can find a local place to work on it, I can help and I'll have all the tools you'll need to do it.

Originally Posted by BRZtoni

Ill be installing ap racing big brake kit very soon before track day.
will be needing someone to help me bleed calipers

I can help you with the front pipe. Ill be be free 2 weeks from now ill be in maryland and newyork next weekend.

Depending on my work schedule, I may be down to help. I have yet to install my JDM underpanels bc I have no where to work on my car lol.