Slight vibration/shaking on idle after fixing some leaks - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Gtouma · 04-03-2020, 07:22 AM

Hello,

I recently fixed the leaks of the Cylinder head , camshaft housing and cap (driver side ) by removing the engine then dismantling the parts along with the timing cover and chain ,

We placed all the parts correctly even i have replaced the spark plugs , new engine/ transmission mounts with new ones,

However now there is a light vibration which is exactly the same to the typical cold start vibration but it doesn't go away even if the car gets warm,

There is no CEL or error codes and the car drives normally fine ( i have been driving for around 1500km) and RPM is stable on idle the car just shakes ,

I have doubled checked if everything was installed correctly like all sensors , timing chain, wiring, mounts and solenoids ect. Correctly but the issue is still there,

The is 2013 stock manual transmission
75,000 km

Please i need your support,

Thank you

solidsnake11 · 04-03-2020, 10:16 AM

That's a tough one. It maybe the new mounts are transferring more vibration to the car.
When I went to a cd009 a bolt on the transmission was touching the tunnel and you couldn't here yourself think driving, I took a pry bar to that area and all the noise went away.

04-03-2020, 07:22 AM	#1
Gtouma Junior Member Join Date: Apr 2020 Drives: Gt86 2013 Location: Dubai Posts: 4 Thanks: 0 Thanked 2 Times in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Slight vibration/shaking on idle after fixing some leaks Hello, I recently fixed the leaks of the Cylinder head , camshaft housing and cap (driver side ) by removing the engine then dismantling the parts along with the timing cover and chain , We placed all the parts correctly even i have replaced the spark plugs , new engine/ transmission mounts with new ones, However now there is a light vibration which is exactly the same to the typical cold start vibration but it doesn't go away even if the car gets warm, There is no CEL or error codes and the car drives normally fine ( i have been driving for around 1500km) and RPM is stable on idle the car just shakes , I have doubled checked if everything was installed correctly like all sensors , timing chain, wiring, mounts and solenoids ect. Correctly but the issue is still there, The is 2013 stock manual transmission 75,000 km Please i need your support, Thank you

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Slight vibration/shaking on idle after fixing some leaks	Gtouma	Scion FR-S / Toyota 86 GT86 General Forum	7	04-06-2020 06:11 AM
Valve spring recalls, bumping idle, low mileage, leaks, dealership, OH MY..	MuseChaser	Issues \| Warranty \| Recalls / TSB	7	11-17-2018 03:06 PM
Engine shaking/vibrations at 1700rpm - when in neutral/idle	kharn83	Issues \| Warranty \| Recalls / TSB	9	11-07-2013 10:00 PM
ECU replaced. Still has slight misfire, rough idle	xomp	Issues \| Warranty \| Recalls / TSB	1	11-01-2012 08:53 AM
Severe Shaking while in Idle from 0-5 mph	ScionFR-S	Engine, Exhaust, Transmission	1	10-15-2012 09:42 PM

04-03-2020, 10:16 AM	#2
solidsnake11 Senior Member Join Date: Nov 2018 Drives: brz Location: nc Posts: 318 Thanks: 431 Thanked 739 Times in 443 Posts Mentioned: 24 Post(s) Tagged: 0 Thread(s)	That's a tough one. It maybe the new mounts are transferring more vibration to the car. When I went to a cd009 a bolt on the transmission was touching the tunnel and you couldn't here yourself think driving, I took a pry bar to that area and all the noise went away.

User Name		Remember Me?
Password