WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1301 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

mrderp · 01-16-2018, 11:08 AM

Quote:

Originally Posted by Adam_L

Ohhhh, if Tony Montana would have been there.... big party, forget the cars!

Say hello to my little friends kind of situation.

zeal86 · 01-18-2018, 12:31 PM

So I drove 550 round-trip miles yesterday... I accomplished a number things in doing so...

I got to see an iconic car builder in action. That iconic car builder being Akira Nakai aka Nakai San. I was able to witness and document a portion of the build. One of my Misfits https://www.instagram.com/team.misfits/ ) team mates is the owner of the now RWB Porche https://www.instagram.com/rwb_dallas/.

The second thing I was able to do was pick up some more aero parts from Greyhound... they are really hit and miss... so while I was in The Dallas area, I stopped by and picked up my package.

The third thing I was able to get done was purchase 2 4x8 sheets of 1/4" ABS. Saved money on shipping! More custom aero parts coming soon!

The fourth thing I was able to do is get an in-person look at a Charvonia Designs diffuser. I will use that design to help jumpstart my diffuser fabrication.

And finally, I was able to hang out with some of my Misfits team mates!

Very productive trip to Dallas!

__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

ichitaka05 · 01-19-2018, 11:22 AM

Did quick review and Q&A for this part: ITS Pedal Support Bracket

I love this mod! It's one of the top 5 fav mod I've done to my car. Brake pedal feel hellova a lot better with this part installed.

mazeroni · 01-21-2018, 03:12 PM

Maybe this counts.

I finally ordered a SpeedFactory V1 Catback. It took 2.5 years of adding it to my cart then deleting it to finally pull the trigger.

I'm assuming this will be my 1st and only mod, until I finally pull the trigger on the Daily Rage UEL header system :|

humfrz · 01-21-2018, 04:30 PM

Quote:

Originally Posted by mazeroni

Maybe this counts.

I finally ordered a SpeedFactory V1 Catback. It took 2.5 years of adding it to my cart then deleting it to finally pull the trigger.

I'm assuming this will be my 1st and only mod, until I finally pull the trigger on the Daily Rage UEL header system :|

Damn happy for ya, mazeroni ..........

At that rate, you should have a header within five years ......

humfrz

cfordart · 01-21-2018, 07:53 PM

Finally finished installing new JDM headlights. New lights "forced" me to replace the old bumper that was having severe "alignment mismatch" at the fender. Look Ma...no more bumper gap!

New bumper that fits ... new headlights that match the rest of the TRD body pieces ... all is good for a while!

zeal86 · 01-22-2018, 10:16 PM

Took a break from my wide body install to put this together today...

Shitty image to start off with but gets the point across...

I'll try to do a rear view soon...

My new look for 2018 and beyond...

For the most part, I'm still only debating on wing/spoiler and wheels.

__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

Ghost of Akina · 01-22-2018, 10:25 PM

Quote:

Originally Posted by cfordart

Finally finished installing new JDM headlights. New lights "forced" me to replace the old bumper that was having severe "alignment mismatch" at the fender. Look Ma...no more bumper gap!

New bumper that fits ... new headlights that match the rest of the TRD body pieces ... all is good for a while!

Clean lines!

Spacemane969 · 01-23-2018, 12:14 PM

Tried to change diff bushings and stripped inner thread. These are my front bolts after 75k miles

KR-S · 01-27-2018, 09:07 PM

After almost 3 years of being stock, I finally got around to installing an exhaust this morning! It's a Tanabe Medallion Concept-G single exit exhaust. I gotta admit, it's actually pretty quiet and not as loud as I expected. Still happy with this because now I won't sound like a fuckboi in front of cops.

Name: IMG_3882.JPG
Views: 849
Size: 182.8 KB

Name: IMG_3882.JPG
Views: 849
Size: 182.8 KB

finch1750 · 01-27-2018, 10:49 PM

No pics cuz nothing fancy but changed my coolant and swapped my JDM clear Tom's tails for USDM through warranty since they got hella water in one. Bummed they discontinued the JDM as I much prefer the amber turn signal vs. the red.

Also got a rough measurements to make some oil cooler spacers since I have a DIY kit and it sits too low blocking the bottom 3-4 rows. Will get some pics next weekend after my buddy 3D prints them for me.

Quote:

Originally Posted by KR-S 86

After almost 3 years of being stock, I finally got around to installing an exhaust this morning! It's a Tanabe Medallion Concept-G single exit exhaust. I gotta admit, it's actually pretty quiet and not as loud as I expected. Still happy with this because now I won't sound like a fuckboi in front of cops.

Get a catted (or dual resonated) front pipe and it'll be perfect. Just don't try and get a catless header too or your ears will bleed. I wanted the extra power but that with my Berk catted front pipe is my favorite combo even over my Miltek and Tomei set-up now.

finch1750 · 01-27-2018, 10:56 PM

Quote:

Originally Posted by humfrz

Damn happy for ya, mazeroni ..........

At that rate, you should have a header within five years ......

humfrz

Damn that pic brings back good memories. fun weekend. 11/10 would do again @ichitaka05

S. Snake · 01-27-2018, 11:44 PM

Toot this for a shakedown today after blowing off an intercooler hose last night

Sent from my SM-G930V using Tapatalk

zeal86 · 01-28-2018, 12:53 AM

Today I photoshopped what my plans are for the rear of my 86...

I'm excited to arrive at a final product!

__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

01-19-2018, 11:22 AM	#18203
ichitaka05 Site Moderator Join Date: Oct 2009 Drives: ichi 86 Project Location: Middle of No where Posts: 20,965 Thanks: 7,663 Thanked 19,051 Times in 8,326 Posts Mentioned: 677 Post(s) Tagged: 27 Thread(s)	Did quick review and Q&A for this part: ITS Pedal Support Bracket I love this mod! It's one of the top 5 fav mod I've done to my car. Brake pedal feel hellova a lot better with this part installed. __________________

01-21-2018, 07:53 PM	#18206
cfordart Senior Member Join Date: Feb 2013 Drives: 2014 FR-S Location: Memphis Posts: 183 Thanks: 16 Thanked 91 Times in 49 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Finally finished installing new JDM headlights. New lights "forced" me to replace the old bumper that was having severe "alignment mismatch" at the fender. Look Ma...no more bumper gap! New bumper that fits ... new headlights that match the rest of the TRD body pieces ... all is good for a while! Attached Images

01-22-2018, 10:16 PM	#18207
zeal86 Senior Member Join Date: Jul 2014 Drives: Posts: 1,947 Thanks: 1,149 Thanked 1,773 Times in 872 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	Took a break from my wide body install to put this together today... Shitty image to start off with but gets the point across... I'll try to do a rear view soon... My new look for 2018 and beyond... For the most part, I'm still only debating on wing/spoiler and wheels. __________________________________________ projekt zeal86 build zeal.eightsix Facebook Instagram @zeal.eightsix Last edited by zeal86; 01-26-2018 at 03:01 PM.

01-27-2018, 11:44 PM	#18213
S. Snake Member Join Date: Jan 2018 Drives: 13' Asphalt Location: Antelope Valley, CA Posts: 94 Thanks: 34 Thanked 51 Times in 32 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Toot this for a shakedown today after blowing off an intercooler hose last night Sent from my SM-G930V using Tapatalk __________________ "always forward" >>>>>>>>>>>

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

01-18-2018, 12:31 PM	#18202
zeal86 Senior Member Join Date: Jul 2014 Drives: Posts: 1,947 Thanks: 1,149 Thanked 1,773 Times in 872 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	So I drove 550 round-trip miles yesterday... I accomplished a number things in doing so... I got to see an iconic car builder in action. That iconic car builder being Akira Nakai aka Nakai San. I was able to witness and document a portion of the build. One of my Misfits https://www.instagram.com/team.misfits/ ) team mates is the owner of the now RWB Porche https://www.instagram.com/rwb_dallas/. The second thing I was able to do was pick up some more aero parts from Greyhound... they are really hit and miss... so while I was in The Dallas area, I stopped by and picked up my package. The third thing I was able to get done was purchase 2 4x8 sheets of 1/4" ABS. Saved money on shipping! More custom aero parts coming soon! The fourth thing I was able to do is get an in-person look at a Charvonia Designs diffuser. I will use that design to help jumpstart my diffuser fabrication. And finally, I was able to hang out with some of my Misfits team mates! Very productive trip to Dallas! __________________________________________ projekt zeal86 build zeal.eightsix Facebook Instagram @zeal.eightsix

01-21-2018, 03:12 PM	#18204
mazeroni Senior Member Join Date: Aug 2015 Drives: 2013 Scion FR-S Series 10 Location: Nashville, TN Posts: 1,116 Thanks: 600 Thanked 1,017 Times in 512 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Maybe this counts. I finally ordered a SpeedFactory V1 Catback. It took 2.5 years of adding it to my cart then deleting it to finally pull the trigger. I'm assuming this will be my 1st and only mod, until I finally pull the trigger on the Daily Rage UEL header system :\|

01-23-2018, 12:14 PM	#18209
Spacemane969 Senior Member Join Date: Aug 2014 Drives: 2013 ARGENTO A/T Location: Hampton Roads, Virginia, US Posts: 345 Thanks: 149 Thanked 136 Times in 68 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Tried to change diff bushings and stripped inner thread. These are my front bolts after 75k miles

01-28-2018, 12:53 AM	#18214
zeal86 Senior Member Join Date: Jul 2014 Drives: Posts: 1,947 Thanks: 1,149 Thanked 1,773 Times in 872 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	Today I photoshopped what my plans are for the rear of my 86... I'm excited to arrive at a final product! __________________________________________ projekt zeal86 build zeal.eightsix Facebook Instagram @zeal.eightsix

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 04:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 06:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) -- General Topics	63	04-12-2012 10:19 PM

User Name		Remember Me?
Password