FS: Custom Switch Inserts w/ Illuminated Switches - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Stang70Fastback · 04-25-2019, 05:11 PM

UPDATE! I now take orders through my new webpage

https://www.seriesblueadventures.com...-panel-insert/

I make these myself, and I've sold over 80 so far, with no complaints! It's a plastic chassis with four, or six ON/OFF, SPST toggle switches. They have a red status LED on the tip, and are rated for 12V @ 30A. I make inserts in sizes to fit both push start and NON push start vehicles.

People have used this to control everything from Pedal Dance, to Radiator Fans, to Dashcams, to Radar Detectors, to Trailer Harnesses, to Driving Lights, to Underglow, to Air Compressors, to Active Exhaust, to Subwoofers, to Air Horns, etc...

This is designed to slot into the useless cubby hole in the lower dash. All you need to do is wire it up however you want for whatever accessories you have, and insert it into the cubby hole. You'll have to drill/cut out the back of the cubby to run wires, and I recommend a dab of glue in the long run once you finalize the wiring. A new trim piece is less than $5 at the dealership if this worries you.

PUSH START MODELS (smaller cubby)
$40 - Blank (cut your own holes)
$70 - 4 Switch
KEY START MODELS (larger cubby)
$70 - Blank (cut your own holes)
$100 - 4 Switch
$120 - 6 Switch

Shipping is $8/$10 anywhere in the continental US for the small/large panels. $14 international shipping.

PM me if you're interested!

Some Facebook-hosted photos. Let me know if they stop working:

Mdulin · 05-03-2019, 01:49 PM

How would you program it for pedal dance?

soundman98 · 05-03-2019, 08:03 PM

Quote:

Originally Posted by Mdulin

How would you program it for pedal dance?

you would need to set up an arduino to do that, and the switch would just be one of the inputs.

Howaitoguru · 05-23-2019, 08:40 PM

Quote:

Originally Posted by Stang70Fastback

I make these myself, and I've sold over 80 so far, with no complaints! It's a plastic chassis with four, or six ON/OFF, SPST toggle switches. They have a red status LED on the tip, and are rated for 12V @ 30A. I make inserts in sizes to fit both push start and NON push start vehicles.

People have used this to control everything from Pedal Dance, to Radiator Fans, to Dashcams, to Radar Detectors, to Trailer Harnesses, to Driving Lights, to Underglow, to Air Compressors, to Active Exhaust, to Subwoofers, to Air Horns, etc...

This is designed to slot into the useless cubby hole in the lower dash. All you need to do is wire it up however you want for whatever accessories you have, and insert it into the cubby hole. You'll have to drill/cut out the back of the cubby to run wires, and I recommend a dab of glue in the long run once you finalize the wiring. A new trim piece is less than $5 at the dealership if this worries you.

PUSH START MODELS (smaller cubby)
$35 - Blank (cut your own holes)
$50 - 4 Switch
KEY START MODELS (larger cubby)
$65 - Blank (cut your own holes)
$75 - 4 Switch
$95 - 6 Switch

Shipping is $8/$10 anywhere in the continental US for the small/large panels. $14 international shipping.

PM me if you're interested!

Some Facebook-hosted photos. Let me know if they stop working:

Interested, also where’d you get that alcantara cover to clean up that area?

Sent from my iPhone using Tapatalk

Stang70Fastback · 05-23-2019, 08:52 PM

Quote:

Originally Posted by Howaitoguru

Interested, also where’d you get that alcantara cover to clean up that area?

I had it wrapped by Sweidit.

SkyeHack · 06-14-2019, 10:25 PM

I sent you an email!

pauletello · 06-21-2019, 05:32 PM

Do you have blue colored LED ones by any chance?

04-25-2019, 05:11 PM	#1
Stang70Fastback A.K.A. Starlord Join Date: Oct 2013 Drives: 2015 Series.Blue Location: Illinois Posts: 1,842 Thanks: 845 Thanked 2,099 Times in 834 Posts Mentioned: 30 Post(s) Tagged: 3 Thread(s)	FS: Custom Switch Inserts w/ Illuminated Switches UPDATE! I now take orders through my new webpage https://www.seriesblueadventures.com...-panel-insert/ I make these myself, and I've sold over 80 so far, with no complaints! It's a plastic chassis with four, or six ON/OFF, SPST toggle switches. They have a red status LED on the tip, and are rated for 12V @ 30A. I make inserts in sizes to fit both push start and NON push start vehicles. People have used this to control everything from Pedal Dance, to Radiator Fans, to Dashcams, to Radar Detectors, to Trailer Harnesses, to Driving Lights, to Underglow, to Air Compressors, to Active Exhaust, to Subwoofers, to Air Horns, etc... This is designed to slot into the useless cubby hole in the lower dash. All you need to do is wire it up however you want for whatever accessories you have, and insert it into the cubby hole. You'll have to drill/cut out the back of the cubby to run wires, and I recommend a dab of glue in the long run once you finalize the wiring. A new trim piece is less than $5 at the dealership if this worries you. PUSH START MODELS (smaller cubby) $40 - Blank (cut your own holes) $70 - 4 Switch KEY START MODELS (larger cubby) $70 - Blank (cut your own holes) $100 - 4 Switch $120 - 6 Switch Shipping is $8/$10 anywhere in the continental US for the small/large panels. $14 international shipping. PM me if you're interested! Some Facebook-hosted photos. Let me know if they stop working: __________________ . Check out my blog, read all about my BRZ adventures, and oogle my sweet cell-phone photos! You can also find me on Instagram, and on Facebook. Last edited by Stang70Fastback; 10-29-2019 at 03:13 PM.

06-14-2019, 10:25 PM	#6
SkyeHack Senior Member Join Date: Mar 2016 Drives: 2018 BRZ tS Location: Florida Posts: 158 Thanks: 512 Thanked 137 Times in 56 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I sent you an email! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Finished My Toggle Switches and Custom Wiring	Stang70Fastback	Electronics \| Audio \| NAV \| Infotainment	10	08-26-2019 03:15 PM
[PLEASE DELETE]	Stang70Fastback	Audio/Visual, Electronics, Infotainment, NAV	5	12-20-2018 11:15 AM
Custom Sheepskin Seat Inserts	Llilith	BRZ First-Gen (2012+) -- General Topics	18	01-24-2015 05:27 PM
Custom USB Cover Switch	Chad86	Scion FR-S / Toyota 86 GT86 General Forum	14	01-12-2015 06:08 PM
Zeta Products Custom Console Inserts	zetaproducts.net	Interior Parts (Incl. Lighting)	28	06-14-2013 09:28 AM

06-21-2019, 05:32 PM	#7
pauletello Member Join Date: Sep 2014 Drives: 2013 Scion FR-S Location: San Gabriel Valley Posts: 38 Thanks: 3 Thanked 23 Times in 11 Posts Mentioned: 1 Post(s) Tagged: 2 Thread(s)	Do you have blue colored LED ones by any chance?

User Name		Remember Me?
Password