Pop clip sizes? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FRSBRZGT86FAN · 07-28-2015, 11:21 AM

Hi Guys,

I replaced my headlights and sidemarkers to make them more "JDM" as the people say now

But I found that the philips screw type pop clips were a bitch to remove and install without breaking because they were seated in so tight and ended up breaking like 3 or 4 of them. I would like to know if anyone knows the size of them? Because I would like to replace them with ones that simpler and easier to remove with my pop clip tool like this type: [ame="http://www.amazon.com/GOOACC-Nylon-Fastener-Rivet-Clips/dp/B008427D88/ref=pd_sbs_263_2?&ie=UTF8&refRID=0H5V3RPYSDT6M1Y3T ZV1"]Amazon.com: GOOACC Nylon Fastener Rivet Clips, 8mm - 40-Pieces: Automotive[/ame]

So a size for the ones on the headlights, wheel well liners, and the undertray of the front bumper would be most appreciated

Bergen23 · 07-28-2015, 11:25 AM

Personally, I'd just go to the dealership. I asked my salesman, he said give me a second and came out with a handful of them for me. Way more than I needed so I have a bunch of extras for just in case. It's free and will only cost you a bit of your time.

vroom4 · 07-28-2015, 11:31 AM

@Maximal, about a buck a piece plus shipping.

FRSBRZGT86FAN · 07-28-2015, 11:45 AM

Quote:

Originally Posted by Bergen23

Personally, I'd just go to the dealership. I asked my salesman, he said give me a second and came out with a handful of them for me. Way more than I needed so I have a bunch of extras for just in case. It's free and will only cost you a bit of your time.

Quote:

Originally Posted by vroom4

@Maximal, about a buck a piece plus shipping.

Figured out the size after some digging its basically for the fender liner which has an 8mm hole so any pop clip that fits that size will work

Sent from my A0001 using Tapatalk

G-awesome · 07-28-2015, 12:05 PM

I think the pop rivets for the undertray of the front bumper is 10mm? I remember the pop rivets were slightly bigger. Everything else is pretty much 8mm. Just measure the diameter of the hole and that's the size that you'll need if you're unsure.

DAEMANO · 07-28-2015, 12:15 PM

Quote:

Originally Posted by FRSBRZGT86FAN

Hi Guys,

I replaced my headlights and sidemarkers to make them more "JDM" as the people say now

But I found that the philips screw type pop clips were a bitch to remove and install without breaking because they were seated in so tight and ended up breaking like 3 or 4 of them. I would like to know if anyone knows the size of them? Because I would like to replace them with ones that simpler and easier to remove with my pop clip tool like this type: Amazon.com: GOOACC Nylon Fastener Rivet Clips, 8mm - 40-Pieces: Automotive

So a size for the ones on the headlights, wheel well liners, and the undertray of the front bumper would be most appreciated

Answered this a few weeks ago, here's a re-post. Our car has 3 sizes. They're cheap so buy spares of all 3, you'll probably need them at one time or another.

http://www.ft86club.com/forums/showp...62&postcount=7

Quote:

Originally Posted by DAEMANO

Certainly,

Amazon.com: 15 Subaru Bumper Engine Cover Fender And Grille Clips: Automotive

Amazon.com: 15 Subaru Front Bumper & Quarter Panel Push-Type Clips: Automotive

Amazon.com: 15 Subaru Engine Cover and Fender Liner Clips 90913-0067: Automotive

FRSBRZGT86FAN · 07-28-2015, 12:33 PM

Quote:

Originally Posted by G-awesome

I think the pop rivets for the undertray of the front bumper is 10mm? I remember the pop rivets were slightly bigger. Everything else is pretty much 8mm. Just measure the diameter of the hole and that's the size that you'll need if you're unsure.

Quote:

Originally Posted by DAEMANO

Answered this a few weeks ago, here's a re-post. Our car has 3 sizes. They're cheap so buy spares of all 3, you'll probably need them at one time or another.

http://www.ft86club.com/forums/showp...62&postcount=7

Yup, I found them I really just wanted them all to be pop clips simply for future ease of install if I have to take the bumper off again.

Sent from my A0001 using Tapatalk

No1der · 07-28-2015, 12:33 PM

Quote:

Originally Posted by DAEMANO

Answered this a few weeks ago, here's a re-post. Our car has 3 sizes. They're cheap so buy spares of all 3, you'll probably need them at one time or another.

http://www.ft86club.com/forums/showp...62&postcount=7

@DAEMANO Do you know what size are the ones that are under the trunk carpet? Which kept the tools?

DAEMANO · 07-28-2015, 12:44 PM

Quote:

Originally Posted by No1der

@DAEMANO Do you know what size are the ones that are under the trunk carpet? Which kept the tools?

I'll check when I get home.

No1der · 08-10-2015, 02:05 PM

Asked part shop at the dealer and It seems like this one.
Part#95022AC040ND

http://parts.subaru.com/p/Subaru_201...22AC040ML.html

BRZBYE · 04-19-2016, 03:47 PM

Just posted an update to my own thread about this for anyone interested in replacement clips! LINK

Chanpion · 04-19-2016, 08:59 PM

Tip:
If you can't find them at Toyota or have to pay shipping, go to Subaru. Half the price and they had stock so I didn't have to wait a week for an order.

07-28-2015, 11:21 AM	#1
FRSBRZGT86FAN Senior Member Join Date: Jun 2013 Drives: 2023 GR SUPRA,15 FR-S (SOLD) Location: Philadelphia, PA Posts: 4,235 Thanks: 3,086 Thanked 2,100 Times in 1,397 Posts Mentioned: 31 Post(s) Tagged: 2 Thread(s)	Pop clip sizes? Hi Guys, I replaced my headlights and sidemarkers to make them more "JDM" as the people say now But I found that the philips screw type pop clips were a bitch to remove and install without breaking because they were seated in so tight and ended up breaking like 3 or 4 of them. I would like to know if anyone knows the size of them? Because I would like to replace them with ones that simpler and easier to remove with my pop clip tool like this type: [ame="http://www.amazon.com/GOOACC-Nylon-Fastener-Rivet-Clips/dp/B008427D88/ref=pd_sbs_263_2?&ie=UTF8&refRID=0H5V3RPYSDT6M1Y3T ZV1"]Amazon.com: GOOACC Nylon Fastener Rivet Clips, 8mm - 40-Pieces: Automotive[/ame] So a size for the ones on the headlights, wheel well liners, and the undertray of the front bumper would be most appreciated __________________ SOLDOFT Stage 2 UEL E85/Nameless Performance 3 inch axleback with 5 inch mufflers/ TRD CAI / CNT UEL/ Cusco Strut BAR & LHD Brake Stop / "JDM" Toyota Badges / WinJet JDM headlights - DRL MOD from fteightysix.com - 5000K Diode Dynamics HID kit / Diode Dynamics LED interior Lights and sidemarker bulbs / JDM Clear Sidemarkers / Diode Dynamics LED switchbacks/ OLM LED rear turn signals / Tap Turn RelaySOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speaker Sizes	Thefuzz	Electronics \| Audio \| NAV \| Infotainment	68	05-28-2021 06:18 PM
Wheels sizes	johneastvold	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	8	02-01-2015 03:17 PM
Different bulb sizes for BRZ	SmartedPanda	Cosmetic Modification (Interior/Exterior/Lighting)	1	05-13-2014 04:44 PM
Exhuast Sizes	kurbkilla	Engine, Exhaust, Transmission	10	01-17-2014 02:55 PM
SSR disk sizes	fiveoneone	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	0	12-18-2012 05:17 AM

07-28-2015, 11:25 AM	#2
Bergen23 Banned Join Date: Dec 2014 Drives: '15 Halo FR-S Location: Ontario, Canada Posts: 1,317 Thanks: 922 Thanked 950 Times in 492 Posts Mentioned: 22 Post(s) Tagged: 0 Thread(s)	Personally, I'd just go to the dealership. I asked my salesman, he said give me a second and came out with a handful of them for me. Way more than I needed so I have a bunch of extras for just in case. It's free and will only cost you a bit of your time.

07-28-2015, 11:31 AM	#3
vroom4 Join Date: Feb 2014 Drives: BRZ Location: East Posts: 820 Thanks: 18 Thanked 301 Times in 186 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	@Maximal, about a buck a piece plus shipping.

07-28-2015, 12:05 PM	#5
G-awesome Senior Member Join Date: Jan 2014 Drives: 2015 Firestorm Scion FRS Location: Vancouver Posts: 534 Thanks: 371 Thanked 230 Times in 161 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	I think the pop rivets for the undertray of the front bumper is 10mm? I remember the pop rivets were slightly bigger. Everything else is pretty much 8mm. Just measure the diameter of the hole and that's the size that you'll need if you're unsure.

08-10-2015, 02:05 PM	#10
No1der No1der Join Date: Feb 2014 Drives: BRZ Limited Satin White Location: Hacienda Heights, CA Posts: 124 Thanks: 19 Thanked 46 Times in 24 Posts Mentioned: 1 Post(s) Tagged: 2 Thread(s)	Asked part shop at the dealer and It seems like this one. Part#95022AC040ND http://parts.subaru.com/p/Subaru_201...22AC040ML.html

04-19-2016, 03:47 PM	#11
BRZBYE Member Join Date: Apr 2014 Drives: 2014 Subaru BRZ (Limited, Black) Location: Oregon Posts: 67 Thanks: 13 Thanked 17 Times in 8 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Just posted an update to my own thread about this for anyone interested in replacement clips! LINK

04-19-2016, 08:59 PM	#12
Chanpion Senior Member Join Date: Sep 2014 Drives: 13 FRS Satin Location: Alberta Posts: 162 Thanks: 25 Thanked 60 Times in 41 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Tip: If you can't find them at Toyota or have to pay shipping, go to Subaru. Half the price and they had stock so I didn't have to wait a week for an order.

User Name		Remember Me?
Password