|
DIY (Do-It-Yourself) Guides For all DIYs. |
|
Thread Tools | Search this Thread |
01-29-2020, 08:26 AM | #15 | |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,685
Thanks: 352
Thanked 1,475 Times in 771 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
Quote:
Push and hold the home button then push the tune knob twice. It will go into maintenance mode. The 2nd screen you can check vehicle interface. It will tell you if it sees the reverse signal. |
|
01-29-2020, 12:57 PM | #16 | |
Member
Join Date: Sep 2017
Drives: 2016 BRZ
Location: Houston
Posts: 50
Thanks: 3
Thanked 12 Times in 8 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Hopefully I haven't fried the camera itself by sending it 12v instead of 6v. Interestingly, maintenance mode also showed that VSS was not detected but I'm confident that pin was the same on both years too so maybe it does show until you are moving?? Anyway, going to try and fix the camera first before I worry about that too much. |
|
01-30-2020, 11:20 PM | #17 |
Member
Join Date: Sep 2017
Drives: 2016 BRZ
Location: Houston
Posts: 50
Thanks: 3
Thanked 12 Times in 8 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
So tonight I cut out all 4 splices to the backup camera pigtail and twisted the bare wires together to eliminate any issues with my connections.. Still nothing. I switched the White and Black Wires over, still nothing.
Guess I'm going to have to grab a multimeter. BTW - The speed signal changed to 'On' once the car was moving. |
01-31-2020, 03:24 PM | #18 |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,685
Thanks: 352
Thanked 1,475 Times in 771 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
My guess is the NG is Not Good or something like that. The 2018 radio mic has 2. The 2017 and pre have one mic. I believe that is why you get a NG on that one. It will still work. The USB 1 and 2 I have never seen them OK on mine but both work fine. The camera on yours is an issue. My settings below.
|
02-04-2020, 09:02 PM | #19 | |
Member
Join Date: Sep 2017
Drives: 2016 BRZ
Location: Houston
Posts: 50
Thanks: 3
Thanked 12 Times in 8 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I still wont be able to troubleshoot until I get my multi meter back. |
|
04-05-2020, 03:34 AM | #20 |
Junior Member
Join Date: Jan 2020
Drives: 2014 BRZ
Location: San Jose
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Ricco, when I changed my 2014 camera to the 2018 camera, I had to swap the red and yellow wires on the 2018 camera harness to match the Fujitsu10 head unit from what I recall. So the plug is the same, but the wire placement is not.
Last edited by 280z-75; 04-05-2020 at 06:47 PM. Reason: Post was blank |
04-09-2020, 08:44 PM | #21 | |
Member
Join Date: Aug 2017
Drives: 17 BRZ
Location: NY
Posts: 60
Thanks: 10
Thanked 17 Times in 11 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
08-08-2020, 08:26 PM | #22 |
Junior Member
Join Date: May 2020
Drives: 2016 hyper blue Subaru BRZ
Location: CA
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
currently trying to figure out on a 2016
I got most of it to work I just can't get the USBs working and carplay any thoughts?
Last edited by Left4deadkillez; 08-08-2020 at 11:15 PM. |
08-09-2020, 12:06 PM | #23 |
Senior Member
Join Date: May 2019
Drives: AP2 S2000, 91 Miata 1.8L Rotrex 5MT
Location: Detroit, MI
Posts: 465
Thanks: 275
Thanked 299 Times in 187 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
I'm not sure yet. So I just purchased the headunit on ebay and it should be here within the next week. Once it is, I'll start digging into it and seeing what needs to be done to make it work 100%.
__________________
2022 Hyundai Elantra N 6MT SCCA TT S3//Will be back in an 86 eventually
|
08-21-2020, 08:50 PM | #24 | |
Junior Member
Join Date: Aug 2020
Drives: BRZ
Location: Munich
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Last edited by yangniuzai; 12-27-2020 at 03:36 PM. |
|
09-14-2020, 01:19 AM | #25 | |
Junior Member
Join Date: Jan 2020
Drives: 2017 Subaru BRZ
Location: Ontario
Posts: 6
Thanks: 0
Thanked 2 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Thank you! |
|
03-02-2021, 06:56 PM | #26 |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,685
Thanks: 352
Thanked 1,475 Times in 771 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
It has been a couple of years, no “Problems” except normal Apple Play issues. I have a 2019 Ranger now and it’s apple car play is not as stable at this one. I finally picked up a 2018 harness. It was out of a TS. It has been on EBay for a year and he finally accepted my offer. Now to get back into it and remove the home made connectors and put real ones in. I will be using the radio connectors from it. If anyone needs any of the other connectors let me know.
|
03-07-2021, 08:43 AM | #27 |
Senior Member
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,685
Thanks: 352
Thanked 1,475 Times in 771 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
|
Ok the whole harness for these 3 connectors. Just in case someone is pulling one from a wreck these are the 3 you will need. The one with 4 wires is backup camera, the 2 wire connector is for the USB interface, the 1 wire is for the retained accessory.
I made one change in the wire diagram. I hooked up the Car Play interface box power to the remote amp on circuit. This will allow car play to remain on during retained accessory. Last edited by Grady; 03-08-2021 at 01:15 PM. |
01-20-2022, 11:43 PM | #28 |
Member
|
So I have a 2013 BRZ. I figured out the wiring to get the Non-Navi radio from a 2016 or 2017 to work. I have a 2019/2020 Navi Radio. I got it hooked up, everything seems to be working EXCEPT, the radio audio is missing the low end. I had this issue when I upgraded to the 2016/2017 Non-Navi radio, but when i moved the pins it worked.
Does anyone know where the issue is for the missing low end/bass and what I need to move to fix it. I've been looking at wiring diagrams. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2018 radio in 2017? | COBlue | Electronics | Audio | NAV | Infotainment | 53 | 01-22-2022 12:38 PM |
FS: 2017-2018 Toyota 86 Front lip | GYNXxx | Canada Classifieds | 5 | 08-30-2019 06:25 PM |
Help deciding on a 2017 or 2018 BRZ | wild03 | BRZ First-Gen (2012+) -- General Topics | 41 | 09-20-2018 09:29 PM |
2018 BRZ Suspension in pre 2017 brz? | HeresMyMind | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 9 | 03-06-2018 09:39 PM |
2017 Subaru BRZ Navigation? | Crave | Electronics | Audio | NAV | Infotainment | 14 | 08-17-2016 06:40 PM |