Nameless Performance Axleback w/ 4" Mufflers - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Michael · 07-19-2014, 11:00 AM

Does anyone with the Nameless Performance Axleback exhaust with the 4" mufflers have any sound clips? Youtube isn't really helpful atm as most videos don't even state what muffler size they went with.

Thanks!

kALMIGHTY · 08-03-2014, 06:03 AM

Quote:

Originally Posted by Michael

Does anyone with the Nameless Performance Axleback exhaust with the 4" mufflers have any sound clips? Youtube isn't really helpful atm as most videos don't even state what muffler size they went with.

Thanks!

Not sure if you're still looking but I'm installing my Namless Axleback on Monday with the 4" mufflers. I'm installing the downpipe/overpipe combo as well with it so it might not be a 100% what you're looking for but I'll upload a sound clip of the system.

MstrSHAKE · 08-03-2014, 07:25 AM

Quote:

Originally Posted by Michael

Does anyone with the Nameless Performance Axleback exhaust with the 4" mufflers have any sound clips? Youtube isn't really helpful atm as most videos don't even state what muffler size they went with.

Thanks!

I have a fresh one but with 5" mufflers, sorry!

pr3ntic3 · 10-28-2014, 10:40 AM

I'm looking for some sound clips as well or someone local to Austin TX who has the nameless axle-back 4" muffler, and at this point I would take a listen to the 5" realizing that the 4" will be louder. FWIW my endgame is the nameless down/over and somebody's catted header, either ft86speedfactory or the Nameless, not sure which right now.

Really would like to hear someone's 4" Nameless axle-back in person.

humfrz · 10-28-2014, 11:13 AM

Quote:

Originally Posted by pr3ntic3

I'm looking for some sound clips as well or someone local to Austin TX who has the nameless axle-back 4" muffler, and at this point I would take a listen to the 5" realizing that the 4" will be louder. FWIW my endgame is the nameless down/over and somebody's catted header, either ft86speedfactory or the Nameless, not sure which right now.

Really would like to hear someone's 4" Nameless axle-back in person.

Here is a clip of 5" mufflers at start up and idle.

[ame]http://youtu.be/WX0XJIJQ4xs[/ame]

humfrz

pr3ntic3 · 10-30-2014, 11:54 AM

Excellent. Thanks for that vid. now...anybody with 4"? anyone?

meWant · 10-30-2014, 05:21 PM

Quote:

Originally Posted by humfrz

Here is a clip of 5" mufflers at start up and idle.

humfrz

also is that the 3" axleback or the 2.5"?

humfrz · 10-30-2014, 09:33 PM

Quote:

Originally Posted by meWant

also is that the 3" axleback or the 2.5"?

The piping is 2.5".

I don't plan on any other exhaust modifications, so no reason to go larger....

humfrz

Muskokan · 10-30-2014, 09:40 PM

4" would be loud!!

I wanted a good loud exhaust and was afraid 5" would be to quiet. After talkin to the awesome guys at nameless I went 5". It's perfect. Cold starts are orgasmic, very loud and throaty. It's already almost to loud on cold starts so 4" would be to loud in my opinion. sounds plenty loud when your on the throttle, cruising with partial throttle you don't even hear it. I Can't stress enough how quality this thing is, the sound is perfect, the welds are amazing compared to similar priced exhausts. DO IT, you'll love it.

904FRSlow · 10-30-2014, 09:45 PM

I have the 5" and it was loud but has mellowed out. It is still rumbles when you press the peddle at low rpms and screams at high rpms. However, I went and ordered UEL catless headers for the ultimate rumble ;-)

weederr33 · 10-30-2014, 10:54 PM

Question! How does the Nameless 5" muffler 2.5 axleback sound compared to the 2.5" Perrin? I guess resonated or unresonated, either or. Considering this, but still in a pickle. Leaning more towards the Perrin... but doesn't hurt the shop around!

otterpop · 10-30-2014, 11:35 PM

Quote:

Originally Posted by weederr33

Question! How does the Nameless 5" muffler 2.5 axleback sound compared to the 2.5" Perrin? I guess resonated or unresonated, either or. Considering this, but still in a pickle. Leaning more towards the Perrin... but doesn't hurt the shop around!

This was my exact same debate for the longest time. I remember reading that someone heard both of these in person and said the nameless 5" mufflers with downpipe was slightly louder than the perrin unresonated. So I decided to buy a perrin nonresonated catback. I'll post more when it comes in to describe the sound.

Also the nameless was full 2.5" and perrin was also 2.5"

meWant · 10-31-2014, 01:44 AM

Quote:

Originally Posted by humfrz

The piping is 2.5".

I don't plan on any other exhaust modifications, so no reason to go larger....

humfrz

Thats great then this was the exhaust that I was considering whenever I got my twin. My plan was to keep it NA and go with the whole Nameless exhaust, overpipe, and headers.

So again, thanks for the sound clip

N1rve · 10-31-2014, 03:30 AM

Quote:

Originally Posted by humfrz

Here is a clip of 5" mufflers at start up and idle.

humfrz

Didn't you have a TRD exhaust before?

07-19-2014, 11:00 AM	#1
Michael Lovin' the Low Life Join Date: Feb 2012 Drives: 2014 Scion FR-S Location: Florida Posts: 595 Thanks: 134 Thanked 145 Times in 98 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Nameless Performance Axleback w/ 4" Mufflers Does anyone with the Nameless Performance Axleback exhaust with the 4" mufflers have any sound clips? Youtube isn't really helpful atm as most videos don't even state what muffler size they went with. Thanks! __________________ ▰▰▰ 2014 Scion FRS: Bagged & Wide ▰▰▰ INSTAGRAM: @frsmichael ▰▰▰ BUILD THREAD: Click Here

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nameless Axelback 4" vs 5" mufflers. Does anyone have a good comparison?	Evil Jesus	Engine, Exhaust, Transmission	38	08-22-2014 04:51 PM
WTT: Nameless Axleback with 4" mufflers for 5" mufflers or Perrin (PA/NJ/NY/MD)	Pavel	Engine, Exhaust, Bolt-Ons	4	10-20-2013 02:53 AM
(SOLD) FS: (Ga) nameless 3" axleback 5" mufflers	mad_sb	Engine, Exhaust, Bolt-Ons	5	08-29-2013 09:35 PM
Nameless 3" w/4" mufflers and Revworks UEL	The Racers Line	Engine, Exhaust, Transmission	15	07-22-2013 11:07 PM
FS: Nameless 3" Axleback w/5" Mufflers (NoVA/MD)	Mach5	Engine, Exhaust, Bolt-Ons	5	06-30-2013 12:58 PM

10-28-2014, 10:40 AM	#4
pr3ntic3 Junior Member Join Date: Feb 2014 Drives: 2014 Scion FR-S Raven M/T Location: Austin, TX Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I'm looking for some sound clips as well or someone local to Austin TX who has the nameless axle-back 4" muffler, and at this point I would take a listen to the 5" realizing that the 4" will be louder. FWIW my endgame is the nameless down/over and somebody's catted header, either ft86speedfactory or the Nameless, not sure which right now. Really would like to hear someone's 4" Nameless axle-back in person.

10-30-2014, 11:54 AM	#6
pr3ntic3 Junior Member Join Date: Feb 2014 Drives: 2014 Scion FR-S Raven M/T Location: Austin, TX Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Excellent. Thanks for that vid. now...anybody with 4"? anyone?

10-30-2014, 09:40 PM	#9
Muskokan Senior Member Join Date: Aug 2013 Drives: white Sport-tech Location: Ontario Posts: 676 Thanks: 204 Thanked 320 Times in 149 Posts Mentioned: 2 Post(s) Tagged: 1 Thread(s)	4" would be loud!! I wanted a good loud exhaust and was afraid 5" would be to quiet. After talkin to the awesome guys at nameless I went 5". It's perfect. Cold starts are orgasmic, very loud and throaty. It's already almost to loud on cold starts so 4" would be to loud in my opinion. sounds plenty loud when your on the throttle, cruising with partial throttle you don't even hear it. I Can't stress enough how quality this thing is, the sound is perfect, the welds are amazing compared to similar priced exhausts. DO IT, you'll love it.

10-30-2014, 09:45 PM	#10
904FRSlow Senior Member Join Date: May 2014 Drives: '13 FR-S Whiteout Location: Saint Augustine Posts: 304 Thanks: 39 Thanked 88 Times in 59 Posts Mentioned: 2 Post(s) Tagged: 2 Thread(s)	I have the 5" and it was loud but has mellowed out. It is still rumbles when you press the peddle at low rpms and screams at high rpms. However, I went and ordered UEL catless headers for the ultimate rumble ;-)

10-30-2014, 10:54 PM	#11
weederr33 Airborne at your service Join Date: Sep 2014 Drives: '17 BRZ Series.Yellow Location: El Paso, Texas Posts: 6,325 Thanks: 4,528 Thanked 5,586 Times in 2,928 Posts Mentioned: 33 Post(s) Tagged: 2 Thread(s)	Question! How does the Nameless 5" muffler 2.5 axleback sound compared to the 2.5" Perrin? I guess resonated or unresonated, either or. Considering this, but still in a pickle. Leaning more towards the Perrin... but doesn't hurt the shop around!

User Name		Remember Me?
Password