BRZ With Varis Arising 2 Front Bumper Q's - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Lust · 03-11-2017, 11:42 PM

Is anyone here running the Varis front bumper on their BRZ? I have the entire kit ordered but I am concerned about how to fill the holes in the bumper where the fog lights and turn signals are supposed to go. I'll be installing the kit on a 2017 BRZ.

Kiske · 03-12-2017, 01:41 PM

You have a few options.

1. Buy the 13-16 FR-S/GT86 turn signals or side markers and/or fog lights. Have them wired up. There are plenty of add-on kits to add fog lights to these cars.
2. Have the shop installing the kit fiberglass the holes closed prior to paint and bodywork.
3. Similar to the above step. Have the shop close up the turn signal holes only. Use the fog light openings with an aftermarket brake duct kits designed for the same purpose.
4. Leave the holes open and just install a fine black mesh to finish off the front.

Lust · 03-13-2017, 03:04 AM

Quote:

Originally Posted by Kiske

You have a few options.

1. Buy the 13-16 FR-S/GT86 turn signals or side markers and/or fog lights. Have them wired up. There are plenty of add-on kits to add fog lights to these cars.
2. Have the shop installing the kit fiberglass the holes closed prior to paint and bodywork.
3. Similar to the above step. Have the shop close up the turn signal holes only. Use the fog light openings with an aftermarket brake duct kits designed for the same purpose.
4. Leave the holes open and just install a fine black mesh to finish off the front.

Cool thanks. I didn't even know you could wire the 13-16 turn signals into the 17s

86Tony · 03-14-2017, 08:34 AM

Or see if original runduce sell the piece to cover the fogs and turn signals holes

03-11-2017, 11:42 PM	#1
Lust Senior Member Join Date: Jun 2015 Drives: 2017 Subaru BRZ Location: California Bay Area Posts: 214 Thanks: 121 Thanked 105 Times in 55 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	BRZ With Varis Arising 2 Front Bumper Q's Is anyone here running the Varis front bumper on their BRZ? I have the entire kit ordered but I am concerned about how to fill the holes in the bumper where the fog lights and turn signals are supposed to go. I'll be installing the kit on a 2017 BRZ.

03-12-2017, 01:41 PM	#2
Kiske Senior Member Join Date: Jun 2013 Drives: RX-7 / BRZ Location: USA Posts: 2,343 Thanks: 1,026 Thanked 2,501 Times in 1,081 Posts Mentioned: 27 Post(s) Tagged: 0 Thread(s)	You have a few options. 1. Buy the 13-16 FR-S/GT86 turn signals or side markers and/or fog lights. Have them wired up. There are plenty of add-on kits to add fog lights to these cars. 2. Have the shop installing the kit fiberglass the holes closed prior to paint and bodywork. 3. Similar to the above step. Have the shop close up the turn signal holes only. Use the fog light openings with an aftermarket brake duct kits designed for the same purpose. 4. Leave the holes open and just install a fine black mesh to finish off the front. __________________ //2013 World Rally Blue BRZ Limited FBM Turbo--gone //2018 Crystal White Pearl BRZ Ts 2.2l Harrop Supercharged

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Varis Arising 2 Front Lip	Apex-Apex	Exterior Parts (Aero, Lighting, Etc.)	2	08-06-2019 07:06 AM
WTB: varis arising 2 front bumper with lip	TheDrkNite	Want-To-Buy Requests	1	07-11-2016 09:16 PM
WTB: Varis Arising 2 Kit	Apex-Apex	Want-To-Buy Requests	0	06-01-2016 04:12 AM

03-14-2017, 08:34 AM	#4
86Tony Senior Member Join Date: Dec 2013 Drives: 2015 AOZORA EDITION Location: Markham, ON Posts: 477 Thanks: 63 Thanked 122 Times in 81 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	Or see if original runduce sell the piece to cover the fogs and turn signals holes

User Name		Remember Me?
Password