'17 Parts Compatibility With Older Models - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Summerwolf · 09-28-2016, 04:53 PM

Quote:

Originally Posted by ztrevs

A quick google search pulls that up as TRD exhaust.
Does fitment differ at all compared to standard?

No plans on selling unfortunately! It is a lease after all

Tcoat · 09-28-2016, 04:54 PM

Quote:

Originally Posted by Zaku

Correction just checked at Toyota

Parts number for 2017 and 2016 exhaust is the same

PTR03-18131

2017 Same as 2016
@Tcoat

Not sure where it not fitting is coming from, unless it's the same part and they changed the holes.

Excellent. If they changed the hole spacing then they would certainly change the part number or else the whole assembly line would become chaos.

Quote:

Originally Posted by goldenfri

I'm guessing it's probably just a problem with the Borla. I have a borla on my 2.5RS and it fits like garbage.

That was my thought as well but wanted to confirm.

Zaku · 09-28-2016, 05:00 PM

Quote:

Originally Posted by ztrevs

A quick google search pulls that up as TRD exhaust.
Does fitment differ at all compared to standard?

No plans on selling unfortunately! It is a lease after all

After speaking to a Toyota Rep that has knowledge on parts, it seems like it's all Scion Parts, with exactly the same part numbers. Same Lowering Springs, Short Shifter etc. guessing Toyota is just trying to get rid of Scion inventory.

my deduction is that there should be no fitment problems and the incident quoted above is isolated to that aftermarket part.

Tcoat · 09-28-2016, 05:08 PM

Quote:

Originally Posted by ztrevs

A quick google search pulls that up as TRD exhaust.
Does fitment differ at all compared to standard?

No plans on selling unfortunately! It is a lease after all

The fit is the same but we are back to square one with the question of if the 16 and 17s are the same since the TRD only shows to 16.

nikitopo · 09-29-2016, 10:56 AM

How about the rear differential with the 4.3 drive ratio? Does it fit to older models?

Lonewolf · 12-04-2016, 06:35 PM

So, a few members have run into problems fitting axleback exhausts from WORKS and Nameless (designed for 2013-2016 cars) onto their new 2017 model year cars. Just a heads up. Apparently the flanges do not align as they did before.

driggity · 12-04-2016, 08:59 PM

Quote:

Originally Posted by Lonewolf

So, a few members have run into problems fitting catback exhausts from WORKS and Nameless (designed for 2013-2016 cars) onto their new 2017 model year cars. Just a heads up. Apparently the flanges do not align as they did before.

It sounds like the issue is axle backs, not cat backs.

http://www.ft86club.com/forums/showthread.php?t=113474

Lonewolf · 12-04-2016, 10:17 PM

Quote:

Originally Posted by driggity

It sounds like the issue is axle backs, not cat backs.

http://www.ft86club.com/forums/showthread.php?t=113474

Good catch...

ztrevs · 12-30-2016, 12:59 AM

Bringing back a post from the dead...

Since there was a slight change on the 2017 exhausts, has anyone attempted to put on JDM tips?
I'm trying to fight the itch to get an exhaust... hopefully it'll fend off my fix for now.

Irace86 · 12-30-2016, 12:31 PM

How about the new steering wheel? I want controls.

12-04-2016, 06:35 PM	#20
Lonewolf Senior Member Join Date: Dec 2011 Drives: Moped Location: CA Posts: 4,298 Thanks: 4,897 Thanked 2,128 Times in 1,193 Posts Mentioned: 21 Post(s) Tagged: 0 Thread(s)	So, a few members have run into problems fitting axleback exhausts from WORKS and Nameless (designed for 2013-2016 cars) onto their new 2017 model year cars. Just a heads up. Apparently the flanges do not align as they did before. Last edited by Lonewolf; 12-04-2016 at 10:17 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ecutek older roms	Agent_D	Software Tuning	32	05-02-2016 06:55 PM
Older model parts fit 2016?	JPRodney	Scion FR-S / Toyota 86 GT86 General Forum	7	04-27-2016 01:59 PM
Compatibility question	fr-S-14	Forced Induction	4	06-01-2015 11:15 PM
Sizing compatibility?	mikkeluo	Engine, Exhaust, Transmission	1	05-10-2015 08:12 PM

09-29-2016, 10:56 AM	#19
nikitopo Senior Member Join Date: Mar 2014 Drives: '15 BRZ RA Location: Greece Posts: 3,787 Thanks: 2,416 Thanked 1,944 Times in 1,261 Posts Mentioned: 29 Post(s) Tagged: 0 Thread(s)	How about the rear differential with the 4.3 drive ratio? Does it fit to older models?

12-30-2016, 12:59 AM	#23
ztrevs Senior Member Join Date: Aug 2016 Drives: 17' CWP BRZ ------- 15' GLA45 AMG Location: Toronto Posts: 275 Thanks: 52 Thanked 140 Times in 75 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Bringing back a post from the dead... Since there was a slight change on the 2017 exhausts, has anyone attempted to put on JDM tips? I'm trying to fight the itch to get an exhaust... hopefully it'll fend off my fix for now.

User Name		Remember Me?
Password