Got a headlight or foglight question? ASK here.

[Autoxer62]

Thanks, now I know they're specific to the newer cars. I did notice the front side protection, however I know a couple folks who broke them out from the backside (eat a cone with the front tire, tears out the fender liner too). Might not be an issue with the smaller units, but at least for the moment I can move it down my priorities.

I'll look through the thread for the parking light wiring update, it looks like I'm not the only one that wants a parking/fog setup.

[Overdrive]

This may have what you're looking for (even though it's for the early cars). Otherwise it at least will get you headed in the right direction.

Video could probably be half as long as it is because they spend a lot of time not doing the thing the video is about (in typical vlogger fashion), but

[Jyn]

Looking to swap my 2016 BRZ front end with a 2017+ front end and have a couple of questions:

1) it looks like the plugs are different between 13-16 BRZ and 17+ BRZ fog lights? Will I need a harness or does someone make an adapter?

2) is OEM the only good fog lights for 2017+ BRZ? or does someone make an adapter? The Morimoto XB are nice but only fit '13-'16

[.RSG.]

dont know if been asked but I can't find in search.

I am upgrading the Australian GT low spec 6 pin (FR-S) headlight to the GT-S high spec (HID) Headlight.

I have connectors and pins. I can get DRL etc. But I cannot get the LED to work with the PARK Light setting.

Any help is appreciated.

the BRZ diagram has not helped.

the AU GTS headlight only has 7 pins on the headlight 8 pin plug. pin 1 is empty.

Any ideas on a diagram. I can supply what ive done to date


IF I get this working ... I WILL create a you tube vid, because there's nothing up there.