FR-S / BRZ / GT 86 - Fiberglass Subwoofer Enclosure Prototyping by Integrity Concepts

[djdnz]

Originally Posted by Integrity Concepts

We have been very busy building enclosures and fulfilling the orders, and since there has not been any new news, updates, or product development to report as of late, we have spent the time in the shop rather than on the forum. We will get back to new product research and development when all of the orders from our 10" Driver / 8" Passenger / 8" Driver have been fulfilled, so for now there is not a lot to share. Some very cool customized enclosures have been built and we will get pics up of them after the customers have had the first look. If you have any inquiries, please contact us via email or the contact form on our website.

Each customer from the pre order is being contacted individually as their enclosure approaches its turn to be built. Please keep in mind that each enclosure is a hand crafted piece that takes 10-12 hours to construct over a 3-5 day period and longer if it is customized. This means that at any given point we have several enclosures at various steps in the build process. We are currently building and fulfilling about 4 enclosures a week and hope to ramp this number up as we are adding a full time guy at the beginning of the month.

To anyone interested in the 10" Passenger side enclosure, we have them in stock and shipping within 48 hours unless customizations are requested.

Happy Holidays to everyone

Integrity Concepts

Thanks for the update, that's all I wanted. It's Christmas time so obviously things slow down quite a bit, and I'm not in a particular rush since my car is now in storage - it's just nice to hear from the vendor every once in a while, particularly when the original expected date was August

[Integrity Concepts]

Originally Posted by OICU812

Guys who have 10" NOW....

Question: With box installed can you reach to the strut/coilover top pocket? I'm trying I figure out if I can adjust my too coilover adjustment without moving or taking out the sub box.....?

I am not sure what you are referring to by the top pocket (maybe the upper edge of the carpet liner above the strut). Anyways, the enclosure holds back from the strut bar area to allow the fitting of many aftermarket bar options. As for the adjusting of the struts (usually near the top of the area), I feel it would just be easier and quicker to move the enclosure out of the way and then replace it when you are done. It is extremely simple and can be done in less then 30 seconds, out and back in, with no tools! This is due to our quick mounting tab design. Open the trunk, lift the weather seal just slightly in the area of the tab, slide the enclosure out of the way, and make your strut adjustment, then slide the enclosure back into place and lower the weather seal over the tab. It's that simple. Maybe others who have the enclosure installed can chime in on this one as well.

[Integrity Concepts]

Here are some good details about it...

Originally Posted by DarkestBuddha

that metal tab goes underneath the weather stripping to secure it. thats pretty much the whole install.

[OICU812]

Originally Posted by Integrity Concepts

I am not sure what you are referring to by the top pocket (maybe the upper edge of the carpet liner above the strut). Anyways, the enclosure holds back from the strut bar area to allow the fitting of many aftermarket bar options. As for the adjusting of the struts (usually near the top of the area), I feel it would just be easier and quicker to move the enclosure out of the way and then replace it when you are done. It is extremely simple and can be done in less then 30 seconds, out and back in, with no tools! This is due to our quick mounting tab design. Open the trunk, lift the weather seal just slightly in the area of the tab, slide the enclosure out of the way, and make your strut adjustment, then slide the enclosure back into place and lower the weather seal over the tab. It's that simple. Maybe others who have the enclosure installed can chime in on this one as well.

There's a small flap if you will to access back strut tops. Once coilovers in that how on most you adjust rebound. Thx for words if it's super easy to move but yet stays in place until you desire that's comforting to know.

Btw the 8" is secured same exact way??

[Integrity Concepts]

Oh I see. To answer your question: The 8" enclosure mounting is slightly different, as the enclosure doesn't come anywhere near the seal. It instead uses a bracket and knob to secure it to a factory trunk liner clip location with a threaded U bolt clip. Just turn the knob by hand to unscrew it, and slide the enclosure out of the way. So still a very quick and tool less removal. This and the 8" enclosure is much smaller and should not come anywhere near the strut adjustment area.

[ean611]

Originally Posted by Integrity Concepts

Oh I see. To answer your question: The 8" enclosure mounting is slightly different, as the enclosure doesn't come anywhere near the seal. It instead uses a bracket and knob to secure it to a factory trunk liner clip location with a threaded U bolt clip. Just turn the knob by hand to unscrew it, and slide the enclosure out of the way. So still a very quick and tool less removal. This and the 8" enclosure is much smaller and should not come anywhere near the strut adjustment area.

Yay for 8 inchers being better for suspension adjust-ability.

Can't wait for mine.

[dunnr]

how many peeps have received their pass side 8" inclosure

[Integrity Concepts]

Originally Posted by dunnr

how many peeps have received their pass side 8" inclosure

All of our specail order hardware for the 8" mounting is now in! Six of the 8" customers confirmed the sizing and options details for tailoring thier enclosures to their subs and then completed their orders for them last week. We are fulfilling them this week, and as these orders are completed we will move through the next 5-6 orders, as not to get to far in front of ourselves.

Email us with any inquiries. Thanks.

[wdninja]

Originally Posted by Integrity Concepts

Email us with any inquiries. Thanks.

Email sent!

[djdnz]

Sent you a PM. I haven't received any emails yet about my 8".

[Integrity Concepts]

All replies sent! Thanks guys

[ean611]

I'll post pics when I get mine.

[TouchMyHonda]

You guy's alive and well?

[Murseman27]

bump