spun bearing after 200kms. edelbrock - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

AndreC · 08-27-2019, 09:31 PM

I pull 1.5G in my stock block FRS for 7 years now, zero issues. Pan is already partially baffled from factory.
I also use Amsoil 5W30, which helps though and ensure the oil level is to the top of the range, but not overfilled.

Sent from my SM-G965W using Tapatalk

Grady · 08-27-2019, 09:32 PM

Quote:

Originally Posted by Elliotw

How much HP is that good for?

Let’s see.... 8psi, pump gas, supercharger.... looks like around 234.5 wheel HP.

casing · 09-01-2019, 08:49 AM

I've installed a used engine. Lets see how long this one lasts.

jRuN · 09-01-2019, 10:49 AM

Do any of the oil system mods? New pickup, baffle etc?

Sent from my Pixel XL using Tapatalk

ls1ac · 09-01-2019, 12:17 PM

Let us know what you find inside the old engine.

toast · 09-06-2019, 01:59 PM

Quote:

Originally Posted by casing

I am pretty sure this it what happened. It was mostly my fault. My shitty gas mixed oil I believe washed down my cylinders causing my compression rings not to seal essentially boosting my crank case. Blew out the seal and loss oil pressure.

I'm curious how you reached this conclusion.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2013 FR-S Spun Bearing	kyjondeere	Issues \| Warranty \| Recalls / TSB	1	09-14-2018 09:24 AM
Need help, spun rod bearing, vvt parts missing	faninos	Issues \| Warranty \| Recalls / TSB	3	07-12-2018 03:11 PM
Engine failure - Spun rod bearing TWICE	dinoniel	Issues \| Warranty \| Recalls / TSB	38	11-07-2016 01:17 PM
Spun Rod Bearing #4	KE70	Issues \| Warranty \| Recalls / TSB	13	07-05-2016 03:17 PM
Likely hood of a spun bearing	aquaman	Engine, Exhaust, Transmission	14	02-24-2016 01:37 PM

08-27-2019, 09:31 PM	#29
AndreC Member Join Date: Oct 2016 Drives: Fast track beast Location: Canada Posts: 74 Thanks: 21 Thanked 44 Times in 28 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I pull 1.5G in my stock block FRS for 7 years now, zero issues. Pan is already partially baffled from factory. I also use Amsoil 5W30, which helps though and ensure the oil level is to the top of the range, but not overfilled. Sent from my SM-G965W using Tapatalk

09-01-2019, 08:49 AM	#31
casing Member Join Date: Mar 2017 Drives: stock Location: Canada Posts: 45 Thanks: 1 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I've installed a used engine. Lets see how long this one lasts.

09-01-2019, 10:49 AM	#32
jRuN Senior Member Join Date: Jun 2018 Drives: BRZ Location: Florida Posts: 111 Thanks: 7 Thanked 16 Times in 13 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Do any of the oil system mods? New pickup, baffle etc? Sent from my Pixel XL using Tapatalk

User Name		Remember Me?
Password