|
Software Tuning Discuss all software tuning topics. |
|
Thread Tools | Search this Thread |
10-20-2016, 12:03 AM | #15 | |
Member
Join Date: May 2015
Drives: subaru brz
Location: Urbana, IL
Posts: 54
Thanks: 19
Thanked 7 Times in 7 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Quote:
http://www.ebay.com/itm/Brand-New-3-...AAAOSw5VFWNp22 I also find the specific model in Chinese market. But shipping is gonna cost a fortune. |
|
10-20-2016, 09:50 AM | #16 |
Junior Member
Join Date: Oct 2016
Drives: 987.1 Boxster
Location: Virginia
Posts: 3
Thanks: 0
Thanked 7 Times in 2 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
After not being able to find the complete screen, I decided to go another route.
On mine, the display still works. Only the touch screen failed. They are two separate components attached with some adhesive. Most all resistive touch screens are the same except for size so I worked it off with a razor and cleaned the surface with alcohol. A quick search on ebay found a 3.5" touch screen measuring 77x64mm which is very close enough. Once it's on, the calibration process will fit it. http://www.ebay.com/itm/152070987652 EDIT: This looks like a direct replacement to the touch screen. I ordered both but Digi-Key will get here sooner. https://www.digikey.com/product-deta....5Z-ND/2626417 In reality, you can use a larger screen as well since calibration will take care of matching pixels to values. You need to make sure the plug is a 1mm pitch. A lot of them are 0.5mm pitch but there are adaptors and extensions out there as well. The screen wont be here for a week or so. Will update more then. https://goo.gl/photos/mJqGznKX7QpLkPh38 Last edited by Bagarre; 10-20-2016 at 10:42 AM. |
The Following 3 Users Say Thank You to Bagarre For This Useful Post: |
10-24-2016, 08:54 PM | #17 |
Junior Member
Join Date: Oct 2016
Drives: 987.1 Boxster
Location: Virginia
Posts: 3
Thanks: 0
Thanked 7 Times in 2 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Fixed!
The screen at
https://www.digikey.com/product-deta....5Z-ND/2626417 Worked perfectly for $15.00 with shipping. The adhesive is already around the edge so you just pull off the clear plastic and stick it down. The plug is in the right place but a little longer but doesnt affect anything. A drop of glue on the old posts and it's done. I added a strip of foam around the outside. |
The Following 4 Users Say Thank You to Bagarre For This Useful Post: |
10-24-2016, 10:24 PM | #18 | |
Senior Member
Join Date: May 2015
Drives: 2013 Subaru BRZ Limted
Location: Dallas
Posts: 142
Thanks: 15
Thanked 70 Times in 39 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Quote:
__________________
2013 SWP BRZ Limited // 6 MT // Grimmspeed Intake // Tomei Supreme UEL Header // OFT Stage 2, 93 Oct, UEL Tune // Enkei RPF1's // Borla Catback and Diffuser // Bilstein Shocks // Eibach Anti-Roll Kit // TRD Strut Bar
|
|
12-02-2016, 12:45 AM | #19 |
Member
Join Date: Feb 2015
Drives: BRZ 2015 DGM
Location: Bay Area
Posts: 45
Thanks: 1
Thanked 15 Times in 9 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Just did this. I haven't been e85 in months! Took me two hours to flash back to 91 with a broken touch screen a while back.
You rock OP |
The Following User Says Thank You to ze12o For This Useful Post: | Subie_Nubie (12-02-2016) |
03-08-2017, 03:16 PM | #20 |
Senior Member
Join Date: May 2015
Drives: 2013 Subaru BRZ Limted
Location: Dallas
Posts: 142
Thanks: 15
Thanked 70 Times in 39 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Glad you were able to fix it dude. This is why I created this thread!
__________________
2013 SWP BRZ Limited // 6 MT // Grimmspeed Intake // Tomei Supreme UEL Header // OFT Stage 2, 93 Oct, UEL Tune // Enkei RPF1's // Borla Catback and Diffuser // Bilstein Shocks // Eibach Anti-Roll Kit // TRD Strut Bar
|
05-12-2017, 02:30 PM | #21 | |
Junior Member
Join Date: Mar 2017
Drives: 2016 WRB Subaru BRZ
Location: Valdosta, GA
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
10-04-2017, 01:10 PM | #22 |
Member
Join Date: Aug 2017
Drives: 2014 FR-S
Location: Rochester, NY
Posts: 40
Thanks: 3
Thanked 8 Times in 6 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Could someone who has done this shed some light on how the two outer case parts snap together? Maybe some close-up pics? Can the case be opened without breaking the tabs if you know where/how to pry?
Thanks! |
10-04-2017, 02:26 PM | #23 | |
Banned
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,987 Times in 2,981 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
|
Quote:
no its a sealed unit ,not meant to be opened, you have to cut through those tabbs |
|
10-17-2017, 12:26 PM | #24 |
Junior Member
Join Date: Sep 2017
Drives: 14 BRZ Limited
Location: OKC, OK
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
ISO a display screen. Can someone guide me where to find one? Thanks
|
10-19-2017, 09:45 AM | #25 |
Senior Member
Join Date: Sep 2014
Drives: BRZ SWP Limited -6MT
Location: HillCountry-TX
Posts: 419
Thanks: 145
Thanked 158 Times in 103 Posts
Mentioned: 2 Post(s)
Tagged: 1 Thread(s)
|
|
03-02-2018, 12:37 AM | #26 |
Senior Member
Join Date: Oct 2013
Drives: 2013 BRZ Limited
Location: Tucson, AZ
Posts: 266
Thanks: 224
Thanked 127 Times in 78 Posts
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
|
Does anyone know if this would be a direct replacement? The model number is off by one character.
https://www.mouser.com/productdetail...iYaSfBKA%3D%3D |
03-02-2018, 07:54 AM | #27 |
Huge E85 fan!
Join Date: May 2016
Drives: 2016 Scion FRS
Location: Tampa, FL, USA
Posts: 1,850
Thanks: 539
Thanked 1,010 Times in 605 Posts
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
|
I've been asked a few times through PM's for the links to the replacement parts. It's easy to fix these, but you will beat up the case of your OFT quite a bit. Therre's no graceful way to crack open that clam case!
A very nice guy on FB gave me these links in October. I won't call him out, in case he wants to stay lurking, but if you are reading this, you're the best dude! So heres The LCD https://www.mouser.com/Search/m_Prod...68-UMSH8252MDT You'll need The touch display as Well https://www.digikey.com/product-deta...-5Z-ND/2626417 Last edited by guybo; 03-02-2018 at 12:38 PM. |
The Following User Says Thank You to guybo For This Useful Post: | amaciose (03-02-2018) |
03-02-2018, 11:27 AM | #28 |
Senior Member
Join Date: Oct 2013
Drives: 2013 BRZ Limited
Location: Tucson, AZ
Posts: 266
Thanks: 224
Thanked 127 Times in 78 Posts
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
|
Looks like those links are broken. I think these are the correct ones:
UMSH-8252MD-T https://www.mouser.com/productdetail...iYaSfBKA%3D%3D TS-TFT3.5Z https://www.digikey.com/product-deta....5Z-ND/2626417 |
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Header crack question | alchemis | Engine, Exhaust, Transmission | 3 | 04-07-2016 03:36 AM |
Crack in my headlight under warranty? | FRSHunter | Issues | Warranty | Recalls / TSB | 3 | 07-23-2013 12:27 PM |
T7019A HELP boot screen or splash screen change | Trap63 | Electronics | Audio | NAV | Infotainment | 2 | 06-09-2013 05:04 PM |
Crack in the glass.. | Miss_Red | Scion FR-S / Toyota 86 GT86 General Forum | 54 | 02-27-2013 01:06 PM |
Brz Info/Specs (helpful info for questions asked often) | Gaen | BRZ First-Gen (2012+) -- General Topics | 0 | 05-24-2012 10:09 PM |