09-07-2014, 05:13 PM | #225 |
Garden variety obsessive
Join Date: Oct 2013
Drives: 2009 Sti Hatch; 2015 Audi RSQ3
Location: South Africa
Posts: 532
Thanks: 54
Thanked 448 Times in 245 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
Yeah - table and parameter addresses are correct - but which logging parameters are you using for injector fueling?
|
09-07-2014, 07:11 PM | #226 |
Senior Member
Join Date: Sep 2012
Drives: Whiteout FR-S, Evo 8 RS
Location: Kissimmee FL.
Posts: 242
Thanks: 131
Thanked 42 Times in 32 Posts
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
|
paramname = AFR
paramid = 0xFFF89330 isfloat = 1 scalingrpn = x,14.7,* paramname = AFR_CMD paramid = 0xFFF8DBE8 isfloat = 1 scalingrpn = x,14.7,* paramname = Fuel_System_Status paramid = 0xFFF8DC26 databits = 8 paramname = Closed_Loop_Fueling_Target paramid = 0xFFF8A6D0 isfloat = 1 ; similar to STFT / 100 old paramid 0xFFF8A5EC paramname = STFT_AF_Correction1 paramid = 0xFFF8DB8C isfloat = 1 ; same as LTFT / 100 Old paramID 0xFFF8A774 paramname = LTFT_AF_Learning1 paramid = 0xFFF8DB90 isfloat = 1 ;paramname = Port Injector Base_Pulse_Width(ms?) ;paramid = 0xFFF89744 ;isfloat = 1 ;paramname = Fuel_Injector_1_Pulse_Width_4byteExt_E60 ;paramid = 0xFFF887C8 ;isfloat = 1 ;paramname = Port_Injector_PW ;paramid = 0xFFF887C8 ;isfloat = 1 ;scalingrpn = x,0.001,* paramname = Port_Injector_PW_Ram paramid = 0xFFF887D8 isfloat = 1 scalingrpn = x,0.001,* ;paramname = Direct_Injector_PW ;paramid = 0xFFF887E8 ;isfloat = 1 paramname = Direct_Injector_PW_Ram paramid = 0xFFF887F0 isfloat = 1 |
09-08-2014, 11:15 AM | #227 |
Garden variety obsessive
Join Date: Oct 2013
Drives: 2009 Sti Hatch; 2015 Audi RSQ3
Location: South Africa
Posts: 532
Thanks: 54
Thanked 448 Times in 245 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
Can you do me a favour and log this address, in conjunction with all the ones you are logging already:
RAM:FFF887DC Ram_Fuel_Injector_2_Pulse_Width |
09-08-2014, 11:47 AM | #228 |
Garden variety obsessive
Join Date: Oct 2013
Drives: 2009 Sti Hatch; 2015 Audi RSQ3
Location: South Africa
Posts: 532
Thanks: 54
Thanked 448 Times in 245 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
And this one:
RAM:FFF8A038 Ram_Fuel_Injector_1_Pulse_Width_4byteExt_ |
09-08-2014, 10:16 PM | #229 |
Senior Member
Join Date: Sep 2012
Drives: Whiteout FR-S, Evo 8 RS
Location: Kissimmee FL.
Posts: 242
Thanks: 131
Thanked 42 Times in 32 Posts
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
|
Thanks. Here's the log with the new params added:
Those params look like they log the same thing no? *EDIT* Ram_Fuel_Injector_1_Pulse_Width_4byteExt_ is column H Ram_Fuel_Injector_2_Pulse_Width is column F Last edited by D-VO; 09-08-2014 at 10:31 PM. |
09-09-2014, 03:03 AM | #230 |
Garden variety obsessive
Join Date: Oct 2013
Drives: 2009 Sti Hatch; 2015 Audi RSQ3
Location: South Africa
Posts: 532
Thanks: 54
Thanked 448 Times in 245 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
Ok, fuel injector 2 seems to be the same as what you're logging as port ( / 1000).
I may have found something else, if not the FI pulse width (which i will continue). Multiply the FI1 values by 5.7602 * RPM * 0.00000012000001 and tell me what it looks like - I believe it's port injector duty cycle. |
09-09-2014, 06:53 AM | #231 |
Garden variety obsessive
Join Date: Oct 2013
Drives: 2009 Sti Hatch; 2015 Audi RSQ3
Location: South Africa
Posts: 532
Thanks: 54
Thanked 448 Times in 245 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
Add these (along with the one's I've already put up):
RAM:FFF8A06C Ram_FI_Test_1 RAM:FFF8A08C Ram_FI_Test_2 |
09-09-2014, 07:00 AM | #232 |
Garden variety obsessive
Join Date: Oct 2013
Drives: 2009 Sti Hatch; 2015 Audi RSQ3
Location: South Africa
Posts: 532
Thanks: 54
Thanked 448 Times in 245 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
Are you sure you haven't swapped these two around, i.e.
Ram_Fuel_Injector_1_Pulse_Width_4byteExt_ is column F Ram_Fuel_Injector_2_Pulse_Width is column H |
09-09-2014, 01:24 PM | #234 | ||
Senior Member
Join Date: Sep 2012
Drives: Whiteout FR-S, Evo 8 RS
Location: Kissimmee FL.
Posts: 242
Thanks: 131
Thanked 42 Times in 32 Posts
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Quote:
And for the sake of double checking what I have on my SD: paramname = Ram_Fuel_Injector_2_Pulse_Width paramid = 0xFFF887DC isfloat = 1 paramname = Ram_Fuel_Injector_1_Pulse_Width_4byteExt_ paramid = 0xFFF8A038 isfloat = 1 scalingrpn = RPM,5.7602,*,0.00000012000001,* and the two new addy's you gave me: paramname = Ram_FI_Test_1 paramid = 0xFFF8A06C isfloat = 1 paramname = Ram_FI_Test_2 paramid = 0xFFF8A08C isfloat = 1 Going logging in a couple of minutes. Last edited by D-VO; 09-09-2014 at 01:35 PM. |
||
09-09-2014, 05:46 PM | #235 |
Senior Member
Join Date: Jun 2014
Drives: '13 10 Series FRS #1203
Location: Albany, NY
Posts: 850
Thanks: 7
Thanked 385 Times in 220 Posts
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
|
So tomorrow will arrive my OpenPort 2.0. I plan to immediately flash the latest OFT Stage 1 93 Tune (my car is completely stock)
From my understanding I can flash any of the tunes so long as it fits the same transmission and region as my car.. However to be safe I plan on using the same coded tune as my ECU I presume I can simply read the ECU, back up my ROM and then flash the new corresponding rom and be on my way? |
09-09-2014, 06:24 PM | #236 |
Garden variety obsessive
Join Date: Oct 2013
Drives: 2009 Sti Hatch; 2015 Audi RSQ3
Location: South Africa
Posts: 532
Thanks: 54
Thanked 448 Times in 245 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
Shady195 - yup, just pull your original rom, confirm the CALid, and make sure you are flashing the same CALid back.
|
09-11-2014, 06:02 AM | #238 | |
Garden variety obsessive
Join Date: Oct 2013
Drives: 2009 Sti Hatch; 2015 Audi RSQ3
Location: South Africa
Posts: 532
Thanks: 54
Thanked 448 Times in 245 Posts
Mentioned: 73 Post(s)
Tagged: 2 Thread(s)
|
Quote:
|
|
The Following User Says Thank You to Td-d For This Useful Post: | steve99 (09-11-2014) |
|
|
Tags |
ecuflash, tactrix, taxtrix, tuning |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ECUFlash - Getting close! | xjohnx | Software Tuning | 698 | 03-22-2015 12:10 PM |
EcuTek Flash finished but now it shows only a Partial Flash... | Cross | Software Tuning | 32 | 02-12-2014 10:55 AM |
Tactrix Openport | jamesm | Engine, Exhaust, Bolt-Ons | 1 | 01-28-2014 08:27 PM |
Visconti Tuning - Latest BRZ Flash Info | Visconti | Software Tuning | 6530 | 12-24-2013 10:18 PM |
Overboost Protection With OFT/EcuFlash? | FrX | Software Tuning | 9 | 10-23-2013 07:27 AM |