Innovate (Sprintex) Supercharger Owners Topic - Page 315 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

xxscaxx · 04-18-2014, 03:34 PM

Quote:

Originally Posted by olorin

Doh, I was thinking flex-fuel kit. I'm thinking about getting the moto kit at some point.

oh whoops haha. Prime Motoring.

I'd suggest Moto's kit too. All plug and play. I may end up buying the one fitting needed for my kit to plug it into the stock line but right now i've had no issues so I can't complain. For the price of the Prime Motoring one you can't go wrong.

swift996 · 04-18-2014, 03:42 PM

Someone should try this and see if it clears the OEM hood and if it adds power:
http://ft86speedfactory.com/crawford...lock-1558.html

xxscaxx · 04-18-2014, 03:56 PM

Quote:

Originally Posted by swift996

Someone should try this and see if it clears the OEM hood and if it adds power:
http://ft86speedfactory.com/crawford...lock-1558.html

It definitely will not clear the hood.

I already said something to crawford about making some for us, they were apparently going to get in contact with someone for the measurements of hood clearance on the SC and see if they could make something.

May have a little more room with the smaller pulley but those are definitely too big to run with our SC. I was hoping for something like 3mm or smaller, if only for heat purposes.

xjohnx · 04-18-2014, 04:47 PM

Quote:

Originally Posted by swift996

Someone should try this and see if it clears the OEM hood and if it adds power:
http://ft86speedfactory.com/crawford...lock-1558.html

Quote:

Originally Posted by xxscaxx

It definitely will not clear the hood.

I already said something to crawford about making some for us, they were apparently going to get in contact with someone for the measurements of hood clearance on the SC and see if they could make something.

May have a little more room with the smaller pulley but those are definitely too big to run with our SC. I was hoping for something like 3mm or smaller, if only for heat purposes.

even if it does make power on a FI setup (which it didn't when shiv tested on the ESC), i can't imagine it will be worth the hassle of pulling the blower to install them.

TemeCal · 04-18-2014, 06:08 PM

Quote:

Originally Posted by xjohnx

even if it does make power on a FI setup (which it didn't when shiv tested on the ESC), i can't imagine it will be worth the hassle of pulling the blower to install them.

The even bigger hassle, is having to get it retuned. I just don't see it being worth it.

xxscaxx · 04-21-2014, 01:27 PM

Not the best shot, but a pic of the nameless intake pipe all polished up.

Pekingduck · 04-21-2014, 08:19 PM

What tower bar fit with innovative supercharger? I know the cusco fit, but I am wondering what else.

Assunta · 04-21-2014, 10:33 PM

Quote:

Originally Posted by Pekingduck

What tower bar fit with innovative supercharger? I know the cusco fit, but I am wondering what else.

Ground control

xjohnx · 04-21-2014, 10:59 PM

Quote:

Originally Posted by Assunta

Ground control

do you have this setup? I was under the impression it wouldn't fit, but would be stoked if it did.

Assunta · 04-22-2014, 01:24 AM

Quote:

Originally Posted by xjohnx

do you have this setup? I was under the impression it wouldn't fit, but would be stoked if it did.

No I don't, but here's proof:

I tried to order black but they were going anodize an already machined unit and I would lose all the shiny machined edges. Apparently this is a prototype.

You need the 25mm spacers.

xjohnx · 04-22-2014, 07:58 AM

Quote:

Originally Posted by Assunta

No I don't, but here's proof:

I tried to order black but they were going anodize an already machined unit and I would lose all the shiny machined edges. Apparently this is a prototype.

You need the 25mm spacers.

Hm, looks like the IC coolant reservoir might have to be relocated. @xxscaxx i believe you've done this, right? can you post some pics of where you mounted it and the hose routing for it?

xxscaxx · 04-22-2014, 08:57 AM

No that wasn't me actually lol. I can't recall who it was but they drilled and mounted the coolant reservoir to the tie bar in the back. I'm thinking about using some SS flat stock and just moving the coolant bottle back towards the firewall.

They have the non-ic setup on that speedhunter car too.

The ground control setup works but remember thats using the camber plates up front, PLUS that spacer.

I bought a GT Spec strut bar thinking it would fit since its cusco style, but it doesn't. I'm debating on getting a new bar or maybe getting spacers made or something to make this one fit. Not sure yet.

TemeCal · 04-22-2014, 11:57 AM

Has anyone received Bill's ( @DeliciousTuning ), 8.54 tune yet? I realize he's been busy and moved locations, but it's been close to 3 weeks now. My car gets a lot of garage time, because I'm just not 100% confident in the 8.51 tune.

xxscaxx · 04-22-2014, 12:22 PM

I put in a request for it but knew prior that the flexfuel map was a little behind the standard pump gas maps in regards to release time. Haven't heard anything though. I know @Ryan86 has it, but not sure if anyone else does.

8.52 seems great to me, surprised you weren't at least updated to that revision.

04-18-2014, 03:42 PM	#4398
swift996 Senior Member Join Date: Nov 2011 Drives: Subaru BRZ Limited 6MT Location: Winston-Salem, NC Posts: 2,432 Thanks: 712 Thanked 954 Times in 545 Posts Mentioned: 47 Post(s) Tagged: 0 Thread(s)	Someone should try this and see if it clears the OEM hood and if it adds power: http://ft86speedfactory.com/crawford...lock-1558.html __________________ Innovate Supercharged Black Limited BRZ 6-Speed MT(Build Thread) 2010 Cadillac CTS-V Sedan M6 w/550whp (Build Thread)

04-21-2014, 08:19 PM	#4403
Pekingduck Senior Member Join Date: Dec 2011 Drives: 4 wheels Location: Southern Cali Posts: 800 Thanks: 328 Thanked 419 Times in 177 Posts Mentioned: 22 Post(s) Tagged: 3 Thread(s)	What tower bar fit with innovative supercharger? I know the cusco fit, but I am wondering what else. __________________ Pekingduck's Build thread http://www.ft86club.com/forums/showthread.php?t=5717

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovative ideas to increase interior storage capacity?	swift996	Cosmetic Modification (Interior/Exterior/Lighting)	0	01-30-2013 10:45 PM
AVO vs Innovative	diss7	Forced Induction	32	01-21-2013 06:15 PM
Not another need to drive topic	Sargy	Mid-Atlantic	5	11-27-2012 12:18 PM
Technical topic sub-forums	OrbitalEllipses	Site Announcements / Questions / Issues	1	07-17-2012 11:38 PM
Can you close the topic please?	Standardsuspension	Brakes, Suspension, Chassis	14	06-26-2012 05:14 PM

04-21-2014, 01:27 PM	#4402
xxscaxx Senior Member Join Date: Jul 2012 Drives: 2013 SWP BRZ Location: New York Posts: 2,240 Thanks: 458 Thanked 878 Times in 556 Posts Mentioned: 34 Post(s) Tagged: 0 Thread(s)	Not the best shot, but a pic of the nameless intake pipe all polished up.

04-22-2014, 08:57 AM	#4408
xxscaxx Senior Member Join Date: Jul 2012 Drives: 2013 SWP BRZ Location: New York Posts: 2,240 Thanks: 458 Thanked 878 Times in 556 Posts Mentioned: 34 Post(s) Tagged: 0 Thread(s)	No that wasn't me actually lol. I can't recall who it was but they drilled and mounted the coolant reservoir to the tie bar in the back. I'm thinking about using some SS flat stock and just moving the coolant bottle back towards the firewall. They have the non-ic setup on that speedhunter car too. The ground control setup works but remember thats using the camber plates up front, PLUS that spacer. I bought a GT Spec strut bar thinking it would fit since its cusco style, but it doesn't. I'm debating on getting a new bar or maybe getting spacers made or something to make this one fit. Not sure yet.

04-22-2014, 11:57 AM	#4409
TemeCal Senior Member Join Date: Aug 2012 Drives: 86 Location: US Posts: 686 Thanks: 377 Thanked 303 Times in 181 Posts Mentioned: 27 Post(s) Tagged: 1 Thread(s)	Has anyone received Bill's ( @DeliciousTuning ), 8.54 tune yet? I realize he's been busy and moved locations, but it's been close to 3 weeks now. My car gets a lot of garage time, because I'm just not 100% confident in the 8.51 tune.

04-22-2014, 12:22 PM	#4410
xxscaxx Senior Member Join Date: Jul 2012 Drives: 2013 SWP BRZ Location: New York Posts: 2,240 Thanks: 458 Thanked 878 Times in 556 Posts Mentioned: 34 Post(s) Tagged: 0 Thread(s)	I put in a request for it but knew prior that the flexfuel map was a little behind the standard pump gas maps in regards to release time. Haven't heard anything though. I know @Ryan86 has it, but not sure if anyone else does. 8.52 seems great to me, surprised you weren't at least updated to that revision.

User Name		Remember Me?
Password