Harry's Lap Timer for Android: Now Available

[Toyarzee]

What Bluetooth obd plug are you guys using to communicate with your phone, that also doesn't make the dash display get all screwed up after a couple mins use for getting your temps, etc.?

Still have more hw to do to figure out how to get the track map and data overlay on gopro footage... wish I had it figured out for last Saturday already

[mav1178]

Originally Posted by Toyarzee

Still have more hw to do to figure out how to get the track map and data overlay on gopro footage... wish I had it figured out for last Saturday already

RaceRender 3.

Export your data as CSV and import it via RaceRender. The hard part is figuring how how to sync everything.... just gotta find a marker in the video as a reference point.

-alex

[Toyarzee]

Originally Posted by mav1178

RaceRender 3.

Export your data as CSV and import it via RaceRender. The hard part is figuring how how to sync everything.... just gotta find a marker in the video as a reference point.

-alex

Ah so this isn't a live communication of obd scanning data to phone with Harry's, and from phone/Harry's to the gopro it sounds... here I was thinking that people would import their gopro video with that overlay data already present after using in parallel with Harry's. This makes better sense now and will give this a try tonight, thanks!

[mav1178]

Originally Posted by Toyarzee

Ah so this isn't a live communication of obd scanning data to phone with Harry's, and from phone/Harry's to the gopro it sounds... here I was thinking that people would import their gopro video with that overlay data already present after using in parallel with Harry's. This makes better sense now and will give this a try tonight, thanks!

There's other ways of syncing that is faster... however if you have recorded using GoPro primarily, then your only option is to import/overlay via a software like RR3.

If you bought, say, AiM Smarty cam, you can do both at the same time.

http://www.aim-sportline.com/eng/index_car.htm

-alex

[TofuJoe]

@jvincent - I'm not seeing oil temp. Which OBD2 device are you using?

@blue cat - did you ever get oil temp working?

@philooo - the only way to see oil temp on the video overlay is to get the grand prix edition and adjust the settings to show oil temp instead of coolant temp.

@HarryS - what is the official status as of 2017 for getting oil temp on our cars? I did some research, but the reports seem very mixed. Does the OBD2 device matter? My OBD2 readout is attached. Veepeak Wi-Fi adapter with an iphone 6 Plus.

[jvincent]

I'm using an OBDLink LX.

[TofuJoe]

@jvincent - thanks! If it's not too much trouble, can you upload a screenshot of what your sensor info looks like in the app? (Harry says that the Android/iOS versions are the same, and that the oil temp PID doesn't work). Trying to get to the bottom of this mystery.

[jvincent]

Sure. I actually had a picture uploaded before but it looks like I deleted it from my Google photos album at some point.

I'll try and get another one for you.

[paiceyfan]

So, I am still confused...I want a basic set-up for two track days a year. I have to purchase an action cam for another purpose, so if I get an action cam with built-in GPS...can I get laptimes and video overlay on Track Attack or HLT without Race Render...or do I need that, too? (Android phone)


Does Torque Pro do this now?


Thanks for the advice!

[jvincent]

@TofuJoe, totally forgot about this. I'll try to remember to get a screen shot for you.

[jvincent]

After a long delay, here is the screenshot.