|
Scion FR-S / Toyota 86 GT86 General Forum The place to start for the Scion FR-S / Toyota 86 | GT86 |
|
Thread Tools | Search this Thread |
12-24-2023, 01:33 AM | #1 |
Member
Join Date: Sep 2021
Drives: 2015 Scion Frs
Location: Oakland, California
Posts: 42
Thanks: 0
Thanked 10 Times in 7 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Slave master cylinder problem!
So I was installing my new/used slave assembly. when I installed it and topped off the reservoir. Started pumping. Clutch had no pressure and no resisting when pushing the clutch. The pedal would be locked to the floor so you’d have to pump with hand. Still pumped like 50 times no difference no pressure. So I was trying to diagnose. And I decided to do the slave cylinder hose to see if liquid was being pushed. There was not. Then I decided to do the master cylinder cause if there’s no fluid in the slave then how could it build pressure to push the clutch fork. So here’s a vid of the slave cylinder and master cylinder being pumped. Id assume when the hardline is disconnected from the master cylinder it was leak uncontrollably but I’m not sure cause this is the first time doing this. Lmk if this is normal or not and what I should do. I was planning on gettting a new master cylinder or even replace the whole assembly.https://youtube.com/shorts/Y38a0kKPK...bGMCZmC6jLRldp
https://youtube.com/shorts/XvGiw_KvF...FaWPAq3VmXtARS No visible leaks when everything was installed assuming it’s something internal. Any help is appreciated thank you |
12-24-2023, 01:42 AM | #2 |
義理チョコ
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 31,871
Thanks: 52,137
Thanked 36,521 Times in 18,922 Posts
Mentioned: 1107 Post(s)
Tagged: 9 Thread(s)
|
You started with a dry master cylinder. Read up on bench bleeding master cylinders.
__________________
|
12-24-2023, 01:58 AM | #3 |
Member
Join Date: Sep 2021
Drives: 2015 Scion Frs
Location: Oakland, California
Posts: 42
Thanks: 0
Thanked 10 Times in 7 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
12-24-2023, 02:27 AM | #4 |
義理チョコ
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 31,871
Thanks: 52,137
Thanked 36,521 Times in 18,922 Posts
Mentioned: 1107 Post(s)
Tagged: 9 Thread(s)
|
Mine drains slowly just by opening the bleed valve. Keep air from being sucked in on the release.
__________________
|
12-24-2023, 08:00 AM | #5 |
LMGTFY
Join Date: Mar 2016
Drives: 13 FRS, 91 Miata
Location: Lava Town, HI
Posts: 2,776
Thanks: 5,561
Thanked 3,646 Times in 1,625 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
|
So do I get my $5?
Or is the Slave Master not part of the "Manual Swap"? |
The Following User Says Thank You to x808drifter For This Useful Post: | Ultramaroon (12-24-2023) |
12-24-2023, 08:00 AM | #6 |
LMGTFY
Join Date: Mar 2016
Drives: 13 FRS, 91 Miata
Location: Lava Town, HI
Posts: 2,776
Thanks: 5,561
Thanked 3,646 Times in 1,625 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
|
So do I get my $5?
Or is the Slave Master not part of the "Manual Swap"? |
The Following User Says Thank You to x808drifter For This Useful Post: | Ultramaroon (12-24-2023) |
12-24-2023, 12:00 PM | #7 |
Senior Member
Join Date: Dec 2018
Drives: 2013 frs base
Location: central Virginia
Posts: 1,117
Thanks: 1,732
Thanked 919 Times in 476 Posts
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
|
Have you looked into the differences in the wiring and ECUs of manual and autos? If not, bleeding the clutch system may be the least of your worries. From my understanding, switching from auto to man not a "plug and play" deal.
|
12-24-2023, 08:15 PM | #8 |
Member
Join Date: Sep 2021
Drives: 2015 Scion Frs
Location: Oakland, California
Posts: 42
Thanks: 0
Thanked 10 Times in 7 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I have everything for swap including. MT harness etc. so don’t worry bout that. It’s just the cylinder I have a problem with
|
The Following User Says Thank You to Theodorable For This Useful Post: | blsfrs (12-25-2023) |
12-24-2023, 08:17 PM | #9 |
Member
Join Date: Sep 2021
Drives: 2015 Scion Frs
Location: Oakland, California
Posts: 42
Thanks: 0
Thanked 10 Times in 7 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
It also is plug and play because there’s no wires that connect to the clutch. It’s it’s own separate system that doesn’t require any wiring the harness
|
12-24-2023, 08:18 PM | #10 |
Member
Join Date: Sep 2021
Drives: 2015 Scion Frs
Location: Oakland, California
Posts: 42
Thanks: 0
Thanked 10 Times in 7 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
12-24-2023, 08:21 PM | #11 |
Member
Join Date: Sep 2021
Drives: 2015 Scion Frs
Location: Oakland, California
Posts: 42
Thanks: 0
Thanked 10 Times in 7 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
I’ve also already installed everything to manual already. The only problem in my way from getting the car started and on the road is the clutch pedal/slave cylinder and or master cylinder
|
12-24-2023, 11:12 PM | #12 |
義理チョコ
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 31,871
Thanks: 52,137
Thanked 36,521 Times in 18,922 Posts
Mentioned: 1107 Post(s)
Tagged: 9 Thread(s)
|
Do us a favor. Notice that it's the same few people answering your questions. Please don't make another thread when you hit your next snag.
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bent Slave Cylinder Rod | Beefybork | Scion FR-S / Toyota 86 GT86 General Forum | 10 | 04-08-2022 02:42 AM |
Clutch Master Cylinder and Slave Cylinder Question | oec88 | Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) | 0 | 11-01-2021 03:38 AM |
Slave cylinder Help | vincelive123 | Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) | 14 | 05-09-2017 02:50 PM |
FS: OEM Clutch Slave Master Cylinder | MicheleAbbate | Transmission and Driveline | 3 | 05-09-2016 04:48 PM |
Clutch Slave Cylinder | KAR | Southern California | 4 | 08-08-2015 09:25 PM |