aftermarket rubber intake tubing??? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

20valvewynn83 · 08-17-2012, 04:16 AM

If i can recall iv see a rubber aftermarket intake tubing for the stock air box. i seen this at the tour of LA just chilling in the engine bay. does anyone know who makes it?

20valvewynn83 · 08-17-2012, 12:58 PM

????

raz0rbladez909 · 08-17-2012, 01:10 PM

Maybe Samco? They usually make silicone ones for stock airbox. Try them!

Calidrifter · 08-17-2012, 01:31 PM

Are you talking about throttle body to filter?

20valvewynn83 · 08-17-2012, 04:52 PM

Quote:

Originally Posted by Calidrifter

Are you talking about throttle body to filter?

Im talking about a replacement hose that goes from the throttle body to the factory air box. Thing is i want to sound tube still on it otherwise i would just make one.

20valvewynn83 · 08-17-2012, 05:45 PM

something kind of like this

Calidrifter · 08-17-2012, 07:07 PM

Check this thread here

I believe he got them from a home improvement store.

20valvewynn83 · 08-17-2012, 07:23 PM

Quote:

Originally Posted by Calidrifter

Check this thread here

I believe he got them from a home improvement store.

thanks but that set up is garbage i dont want any metal tubing due to head soak. They have way better tubing at auto zone (low heat soak rating with hard plastic)

http://www.spectreperformance.com/#CATALOG.8711

oso_25 · 08-17-2012, 07:27 PM

Are u talking about auto fashions prototype air intake?

20valvewynn83 · 08-17-2012, 07:31 PM

Quote:

Originally Posted by oso_25

Are u talking about auto fashions prototype air intake?

I have no idea what its called do you have a picture of the auto fashion prototype?

oso_25 · 08-17-2012, 08:27 PM

Quote:

Originally Posted by 20valvewynn83

I have no idea what its called do you have a picture of the auto fashion prototype?

They were at the LA tour and had a intake that was plastic like but it was just a prototype and not a finish product I don't have a picture of it but I know somehere should have one

20valvewynn83 · 08-17-2012, 08:29 PM

I hope someone see's this post and then gives me more info on it.

Calidrifter · 08-17-2012, 08:41 PM

They left early so I'm not sure if they got a pic taken of it.

ZetaPerformance · 08-18-2012, 03:04 AM

Are you referring to one of the product that I was shown at the Tour of LA?

If so, we are having our first shipment in September, with the option of a direct replacement with the opening to connect the noise generator; and a clean version with a simply 90 degrees and eliminating the noise generator.

They are made of 4-ply 100% silicone for durability and high performance under hard conditions.

I can post more picture tomorrow with this on the car running with the stock airbox, so you can get a better idea.

08-18-2012, 03:04 AM	#14
ZetaPerformance Join Date: Apr 2012 Drives: 2013 FR-S Location: SoCal Posts: 392 Thanks: 622 Thanked 240 Times in 133 Posts Mentioned: 42 Post(s) Tagged: 0 Thread(s)	Silicone Intake Pipe Are you referring to one of the product that I was shown at the Tour of LA? If so, we are having our first shipment in September, with the option of a direct replacement with the opening to connect the noise generator; and a clean version with a simply 90 degrees and eliminating the noise generator. They are made of 4-ply 100% silicone for durability and high performance under hard conditions. I can post more picture tomorrow with this on the car running with the stock airbox, so you can get a better idea. Last edited by ZetaPerformance; 08-18-2012 at 03:08 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Both: EZ DIY Rubber Trunk Mat (FR-S Only)	Calidrifter	DIY (Do-It-Yourself) Guides	16	10-17-2020 05:07 AM
xcelir8brz's Stock Intake Tube Rubber Delete	xcelir8brz	DIY (Do-It-Yourself) Guides	99	04-09-2014 11:44 PM
86 rubber floormats	denverizzles	Scion FR-S / Toyota 86 GT86 General Forum	30	05-06-2013 05:10 PM
Anyone else smell rubber?	pinoyplaya	BRZ First-Gen (2012+) -- General Topics	15	09-24-2012 03:40 AM
Does Anyone or OEM make a rubber trunk mat?	philstar	Scion FR-S / Toyota 86 GT86 General Forum	10	08-17-2012 09:47 AM

08-17-2012, 01:10 PM	#3
raz0rbladez909 I'm here for the beer Join Date: Jul 2012 Drives: 2013 Scion FRS, 1971 Datsun 240z Location: Menifee, CA Posts: 229 Thanks: 386 Thanked 122 Times in 55 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	Maybe Samco? They usually make silicone ones for stock airbox. Try them!

User Name		Remember Me?
Password