FT-86 SpeedFactory Diffuser by Verus - Complete Aero Solution - Page 36 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Iamwu · 05-25-2016, 05:01 PM

What rear spats is everyone running with their diffusers ?? Naked ??

VerusEric · 05-25-2016, 06:13 PM

Quote:

Originally Posted by Iamwu

What rear spats is everyone running with their diffusers ?? Naked ??

Most people run naked I believe? We're coming out with a set that ties in our side splitters (yet to be released) and the diffuser as well. Should be released here in the next month or two.

Eric

quinceyc · 05-25-2016, 10:57 PM

Is there any possible to install velox rear diffuser without oem diffuser?

VerusEric · 05-25-2016, 11:13 PM

Quote:

Originally Posted by quinceyc

Is there any possible to install velox rear diffuser without oem diffuser?

Yes, a few people have.

quinceyc · 05-25-2016, 11:18 PM

Quote:

Originally Posted by VeloxEric

Yes, a few people have.

Can you provide some pics to see what it looks like? Thank you !!

Decimus · 05-31-2016, 02:53 AM

Quick question @VeloxEric , the mounting points at the sway bar... How high are we supposed to mount the diffuser for proper flow? Or is it subjective? Im currently using the biggest spacers and want to know how high its supposed to be mounted. Its currently mounted at the lowest hanging position.

kuya · 06-01-2016, 11:34 PM

Just installed my diffuser, also used the lowest setting plus the a big spacer and a small one on each of the back bolts, had to cut about a 1x5 of the diffuser off to fit my hks legamax exhaust, all worth it in the end

VerusEric · 06-03-2016, 10:39 AM

Quote:

Originally Posted by quinceyc

Can you provide some pics to see what it looks like? Thank you !!

This is the only shot I can currently find.

Quote:

Originally Posted by Decimus

Quick question @VeloxEric , the mounting points at the sway bar... How high are we supposed to mount the diffuser for proper flow? Or is it subjective? Im currently using the biggest spacers and want to know how high its supposed to be mounted. Its currently mounted at the lowest hanging position.

In the instructions it states to keep the bottom of the strake parallel with the bottom of the car. If the bottom of the car is parallel to the ground, then the strake should be parallel to the ground. That should be your goal when installing the diffuser for maximum benefits. I cannot guess at how high your mounts should be with specific spacers. Hope that helps.

Eric

VerusEric · 06-06-2016, 12:38 PM

Quote:

Originally Posted by quinceyc

Can you provide some pics to see what it looks like? Thank you !!

Found another.

Edit: May as well photodump.

Kyle has over 20k on his diffuser now, no issues to date!

We also did a blog post regarding the rear up-turn lip which has some skepticism associated with it. We will continue to prove function over time even though we have proven function time and time again. A few people feel it necessary to voice their *opinions* that it doesn't work, which is false.

http://www.velox-motorsports.com/#!D...f24c9615a08dcc

wutangbrz · 06-24-2016, 04:16 PM

does this fit with the APR rear spats?

VerusEric · 06-25-2016, 02:34 PM

Quote:

Originally Posted by wutangbrz

does this fit with the APR rear spats?

We haven't found a rear spat it doesn't work with yet, so I would say yes.

1Cor10:23 · 06-28-2016, 10:22 AM

Does anyone know how well the Tanabe Concept G single exit fits with the diffuser?

Takumi788 · 06-30-2016, 08:25 AM

I am considering running in Nasa TT and want to ditch my heavy Q300. Does the diffuser work with the Buddy Club Spec II exhaust? It is not listed in the confirmed fit list or the confirmed doesn't fit list on FT86 Speedfactory. Thanks!

VerusEric · 06-30-2016, 11:22 AM

Quote:

Originally Posted by 1Cor10:23

Does anyone know how well the Tanabe Concept G single exit fits with the diffuser?

Looking at photos, I'm going to say it may fit. It is considerably higher up on the chassis than the Tomei Type 80. I can't say for sure though as pictures are often deceiving.

Quote:

Originally Posted by Takumi788

I am considering running in Nasa TT and want to ditch my heavy Q300. Does the diffuser work with the Buddy Club Spec II exhaust? It is not listed in the confirmed fit list or the confirmed doesn't fit list on FT86 Speedfactory. Thanks!

Buddy Club also appears that it will fit. Portion I'd be most concerned about is the exhaust cutout hole, but as far as the exhaust it appears to sit high enough to not be close to the diffuser for the rest of it.

Sorry I can't be of more help guys, hope that helps a bit.

Eric

06-01-2016, 11:34 PM	#497
kuya Member Join Date: Sep 2012 Drives: 2013 white out fr-s Location: WA Posts: 61 Thanks: 20 Thanked 19 Times in 17 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Just installed my diffuser, also used the lowest setting plus the a big spacer and a small one on each of the back bolts, had to cut about a 1x5 of the diffuser off to fit my hks legamax exhaust, all worth it in the end Attached Images

06-28-2016, 10:22 AM	#502
1Cor10:23 Senior Member Join Date: Jul 2013 Drives: '13 Whiteout FR-S (M/T) Location: GTA Posts: 1,205 Thanks: 492 Thanked 392 Times in 238 Posts Mentioned: 14 Post(s) Tagged: 1 Thread(s)	Does anyone know how well the Tanabe Concept G single exit fits with the diffuser? __________________ \|1Cor10:23 \| Whiteout FR-S \| Form Follows Function Build\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just Ordered the Complete StopTech Brake Package from FT86 SpeedFactory	naikaidriver	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	28	02-28-2017 02:48 PM
Single-Exit Exhaust Diffuser/Hole Problem... Solution!	Anthony	Cosmetic Modification (Interior/Exterior/Lighting)	75	10-13-2016 07:40 PM
Front Wheel Deflectors - FT-86 SpeedFactory by Verus Engineering	VerusEric	Cosmetic Modification (Interior/Exterior/Lighting)	25	09-22-2016 01:41 AM
DriveWay Labs Rear Diffuser - FT-86 SpeedFactory	FT-86 SpeedFactory	Cosmetic Modification (Interior/Exterior/Lighting)	435	01-15-2015 07:20 AM

05-25-2016, 05:01 PM	#491
Iamwu Member Join Date: Sep 2015 Drives: 86 Location: Seattle Posts: 34 Thanks: 0 Thanked 9 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	What rear spats is everyone running with their diffusers ?? Naked ??

05-25-2016, 10:57 PM	#493
quinceyc Member Join Date: Jul 2015 Drives: BRZ Location: Taiwan Posts: 16 Thanks: 3 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Is there any possible to install velox rear diffuser without oem diffuser?

05-31-2016, 02:53 AM	#496
Decimus BAE Join Date: Nov 2014 Drives: Asphalt FRS Location: SGV Posts: 587 Thanks: 152 Thanked 97 Times in 77 Posts Mentioned: 2 Post(s) Tagged: 2 Thread(s)	Quick question @VeloxEric , the mounting points at the sway bar... How high are we supposed to mount the diffuser for proper flow? Or is it subjective? Im currently using the biggest spacers and want to know how high its supposed to be mounted. Its currently mounted at the lowest hanging position.

06-24-2016, 04:16 PM	#500
wutangbrz Member Join Date: Jun 2016 Drives: 2015 dgm brz Location: houston Posts: 94 Thanks: 14 Thanked 55 Times in 36 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	does this fit with the APR rear spats?

User Name		Remember Me?
Password