WHAT DID YOU DO TO YOUR BRZ TODAY?

[alan.chalkley]

installed cusco carbon antenna.

[shiumai]

Originally Posted by Howardwei

Would doing 8.5 front and 9.5 rear lose the balance of this car. I want to close the gap without messing with the stock suspension set up at all. approx. 1 inch. since i will probably be running 255 back and 235 front. does poking out make it rub? I am getting one with offset 40

depends on who you talk to and what you're looking for. i wanted more grip and got it. if you want the tail-happy slide-around feel that the stock tires have, you'd lose it. some don't like staggered setups for various reasons, some do for their own reasons.

the gap isn't going to close unless you get larger diameter tires, then your speedo will be off. i stuck to as close to the stock diameter as possible, and closed the gap by lowering the car.

i don't know whether that setup would rub as i never ran it with the stock height - i lowered my car before i got my wheels.

[ZionsWrath]

Originally Posted by DSOmegaX

Added STi bear and valve stem caps =P

Attachment 40676

Please tell, where to get sti bear!!!!!

[Steve201brz]

Originally Posted by larryboy

my forza 5 brz since i cant afford a real one :/

If it wasn't for the watermark I wouldn't of even known it was from the game haha. Those are some crazy graphics
Love the "Kill all tires" haha

[Muskokan]

realized just how bad the stock tires are in snow covered roads, winters ASAP!

[Howardwei]

Oh sorry forgot to mention im getting 18inch. Yea i think the speedometer would be off but I assume it wont be that off. I would drop my car for 1 inch to close the gap but I dont want to mess with camber and coilover since I want to retain the balance of this car. I know thats kind of retarded since I am going 255/35 rear. and I didnt wanna do a stagger but apparently 9.5 would not fit front without camber.

[NateKthx]

Put on the winter set:

[BirdTRD]

Installed rear diffuser, then on my way to Harbour Freight to get some stuff to install my dashcam, WHAM...a construction barrel blowing down the road (super windy and cold today) nails my right front corner! Theeeennnn I installed my dashcam.

[dbrandt01]

Originally Posted by BirdTRD

Installed rear diffuser, then on my way to Harbour Freight to get some stuff to install my dashcam, WHAM...a construction barrel blowing down the road (super windy and cold today) nails my right front corner! Theeeennnn I installed my dashcam.

Sucks about the front corner, but what dash cam is that? I've been considering getting one and that one looks nice from your pictures.

[t.chk]

Originally Posted by BirdTRD

Installed rear diffuser, then on my way to Harbour Freight to get some stuff to install my dashcam, WHAM...a construction barrel blowing down the road (super windy and cold today) nails my right front corner! Theeeennnn I installed my dashcam.

I would have called the local DPW and report flying debris damaged your car, they usually will either apologize or offer compensation...not the whole thing but something.

Originally Posted by dbrandt01

Sucks about the front corner, but what dash cam is that? I've been considering getting one and that one looks nice from your pictures.

That appears to be the Samoon 3H2F if I am not mistaken. I am saving for the DR550GW from blackvue if only they can get the video quality up on the 2 channel one.

[Turbowned]

Originally Posted by Vten

finishing up my powdercoated white STI brembos

Looking good! Who powdercoated your brakes? I've got a set all apart ready for powdercoat, just haven't had time to look for a reputable powdercoater...

[ucsmfu]

Originally Posted by t.chk

I would have called the local DPW and report flying debris damaged your car, they usually will either apologize or offer compensation...not the whole thing but something.



That appears to be the Samoon 3H2F if I am not mistaken. I am saving for the DR550GW from blackvue if only they can get the video quality up on the 2 channel one.

just bought my DR550GW with power magic pro

[BirdTRD]

Originally Posted by dbrandt01

Sucks about the front corner, but what dash cam is that? I've been considering getting one and that one looks nice from your pictures.

It's this one http://www.ebay.com/itm/Full-HD-1080...E:L:OC:US:3160 Seems to be pretty good so far, I guess time will tell. For $52.00, I'm not expecting too much.

[Vten]

Originally Posted by Turbowned

Looking good! Who powdercoated your brakes? I've got a set all apart ready for powdercoat, just haven't had time to look for a reputable powdercoater...

I have a local friend that going to open his own shop , but he did a lot of powdercoating already and currently working at a local auto service store.

I have his card in my restaurant. If you want , I'll send you his info on Tuesday as we are close on Sunday and Monday . Pm me your # or email , I'll text you on Tuesday .