Feeler FS. Full 2013 STi Brembo take offs. - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

xkalelx · 02-01-2017, 08:31 PM

Hey Guys! Feeling out selling my entire braking system. I want to upgrade to a full 6pot/4pot BBK w/ floating rotors for track abuse this next season.

Offering these up for $2100.

This is a full 2013 STi takeoff set. Originally black with STi logos*, these have been fully disassembled, inspected, sandblasted, and plugs swapped out for bleeders so they can be fully bled and have correct piston orientation. They were then "Brembo gold" color matched** to the 2004-2007 color code, OptiCoat ceramic coated, and reassembled. Ive been using Motul RBF600 fluid in them this last year and they have seen 3 track days and around 20k miles of trouble free service. Seals and dust boots are in great shape.

Whats included:
Front and rear Brembo calipers. (direct bolt ons, no brackets needed)
All hardware (slider pins, spring clips, diagonal shims, cotter pins, bleeders, dust boots - All OE Brembo hardware)
Front rotors DBA T3 clubspec 4000 http://tinyurl.com/zh56fnj
Front street pads Hawk HPS 5.0 http://tinyurl.com/zm376lq
Front track pads Carbotech XP10 http://tinyurl.com/gnem8um
Rear rotors DBA T2 Street series http://tinyurl.com/jepnfsb
Rear street pads Hawk HPS 5.0 http://tinyurl.com/hof4vnl
Rear track pads Carbotech XP10 http://tinyurl.com/hle7ra7

Rotors are in excellent shape. They have the typical surface rust. No axial runout(no warping). No heavy scoring. Minor heat checking. You will NOT need to resurface these. These are STi rotors with dual drilled hubs (5x100) and the emergency parking brake works as it should.

Street pads have about 80% pad left, no cracking or taper wear.

Track pads have about 75% pad left. Minor cracking (typical) and no taper wear. Plenty of track days left in these.

I'm keeping my SS brake lines so you are on your own for those, but stock 86 lines work just fine.

Offering these local first to avoid shipping them.

They are currently on my car which is sitting at the shop waiting on a built FA20. So if they sell, Ill need a few days to pull them and clean them up.

No lowballs please, If no one wants them, I will post them in the WRX groups.

I will NOT separate. Its an entire package. Trades may be considered. Feel free to ask.

$500 deposit will hold them. It is OK to discuss a payment plan with me.

*see photo of how they originally were.
**see photo of two calipers, upper left caliper is factory color, lower right caliper is color matched. They are SPOT on.

BigTuna · 02-02-2017, 07:52 AM

Awhhh, gonna get yelled at for not having rule #2 in your pic.

xkalelx · 02-02-2017, 10:37 AM

Yeah I know.... paragraph two of my ad.

I should have a shot up with name and info tomorrow at the latest.

Thanks for the look!

ichitaka05 · 02-02-2017, 11:05 AM

Quote:

Originally Posted by xkalelx

Yeah I know.... paragraph two of my ad.

I should have a shot up with name and info tomorrow at the latest.

Thanks for the look!

If that's the case, I'll wait til tomorrow morning...

JazzleSAURUS · 02-02-2017, 02:10 PM

Man....those would of looked so good if you left them black!!

BigTuna · 02-02-2017, 03:20 PM

Quote:

Originally Posted by xkalelx

Yeah I know.... paragraph two of my ad.

I should have a shot up with name and info tomorrow at the latest.

Thanks for the look!

lol it's hard not to see them when they are all over the facebook group ;D

xkalelx · 02-02-2017, 07:29 PM

Quote:

Originally Posted by ichitaka05

If that's the case, I'll wait til tomorrow morning...

Updated my man.

xkalelx · 02-02-2017, 07:31 PM

Quote:

Originally Posted by BigTuna

lol it's hard not to see them when they are all over the facebook group ;D

Haha, you KNOW you want these. Ill even offer to install for free.

Mvhs09 · 02-02-2017, 08:22 PM

Come to mn to install and deal lol. And paint them black again... Oh so tempting

xkalelx · 02-03-2017, 07:18 PM

Sold! That was fast! Lock it up @ichitaka05

ichitaka05 · 02-03-2017, 07:21 PM

Quote:

Originally Posted by xkalelx

Sold! That was fast! Lock it up @ichitaka05

Yes sir

02-01-2017, 08:31 PM	#1
xkalelx Senior Member Join Date: Feb 2014 Drives: 2013 BRZ black Location: Cincinnati, OH Posts: 394 Thanks: 265 Thanked 283 Times in 113 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Feeler FS. Full 2013 STi Brembo take offs. Hey Guys! Feeling out selling my entire braking system. I want to upgrade to a full 6pot/4pot BBK w/ floating rotors for track abuse this next season. Offering these up for $2100. This is a full 2013 STi takeoff set. Originally black with STi logos, these have been fully disassembled, inspected, sandblasted, and plugs swapped out for bleeders so they can be fully bled and have correct piston orientation. They were then "Brembo gold" color matched* to the 2004-2007 color code, OptiCoat ceramic coated, and reassembled. Ive been using Motul RBF600 fluid in them this last year and they have seen 3 track days and around 20k miles of trouble free service. Seals and dust boots are in great shape. Whats included: Front and rear Brembo calipers. (direct bolt ons, no brackets needed) All hardware (slider pins, spring clips, diagonal shims, cotter pins, bleeders, dust boots - All OE Brembo hardware) Front rotors DBA T3 clubspec 4000 http://tinyurl.com/zh56fnj Front street pads Hawk HPS 5.0 http://tinyurl.com/zm376lq Front track pads Carbotech XP10 http://tinyurl.com/gnem8um Rear rotors DBA T2 Street series http://tinyurl.com/jepnfsb Rear street pads Hawk HPS 5.0 http://tinyurl.com/hof4vnl Rear track pads Carbotech XP10 http://tinyurl.com/hle7ra7 Rotors are in excellent shape. They have the typical surface rust. No axial runout(no warping). No heavy scoring. Minor heat checking. You will NOT need to resurface these. These are STi rotors with dual drilled hubs (5x100) and the emergency parking brake works as it should. Street pads have about 80% pad left, no cracking or taper wear. Track pads have about 75% pad left. Minor cracking (typical) and no taper wear. Plenty of track days left in these. I'm keeping my SS brake lines so you are on your own for those, but stock 86 lines work just fine. Offering these local first to avoid shipping them. They are currently on my car which is sitting at the shop waiting on a built FA20. So if they sell, Ill need a few days to pull them and clean them up. No lowballs please, If no one wants them, I will post them in the WRX groups. I will NOT separate. Its an entire package. Trades may be considered. Feel free to ask. $500 deposit will hold them. It is OK to discuss a payment plan with me. see photo of how they originally were. see photo of two calipers, upper left caliper is factory color, lower right caliper is color matched. They are SPOT on. __________________ Unfriendly Garage EFR Turbo BRZ build #UGBRZ #builtmotorcrew #UGBRZ Last edited by xkalelx; 02-02-2017 at 07:41 PM. Reason: added additional information*

02-02-2017, 10:37 AM	#3
xkalelx Senior Member Join Date: Feb 2014 Drives: 2013 BRZ black Location: Cincinnati, OH Posts: 394 Thanks: 265 Thanked 283 Times in 113 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Yeah I know.... paragraph two of my ad. I should have a shot up with name and info tomorrow at the latest. Thanks for the look! __________________ Unfriendly Garage EFR Turbo BRZ build #UGBRZ #builtmotorcrew #UGBRZ

02-02-2017, 02:10 PM	#5
JazzleSAURUS Senior Member Join Date: May 2015 Drives: 15 BRZ LTD, 05 FXT Location: Western MA Posts: 1,032 Thanks: 561 Thanked 558 Times in 351 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Man....those would of looked so good if you left them black!! __________________ SOLD: 2015 WRB BRZ Limited ('02 WRX BBS, S-04's, Stoptech Sport pads, MXP SP, AVO drop in filter, Mishimoto Intake tube, decatted header, OFT 93 Stage 2 EL Tune, Kartboy rear shifter bushing, Whiteline transmission and subframe lockout bushings, ST Coilovers, SPC Camber bolts w/smaller crash bolt, SPC LCA's & SPC Toe Arm bushings, Red TOMs, TRD Wing.)

02-03-2017, 07:18 PM	#10
xkalelx Senior Member Join Date: Feb 2014 Drives: 2013 BRZ black Location: Cincinnati, OH Posts: 394 Thanks: 265 Thanked 283 Times in 113 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Sold! That was fast! Lock it up @ichitaka05 __________________ Unfriendly Garage EFR Turbo BRZ build #UGBRZ #builtmotorcrew #UGBRZ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Feeler: Front STI Brembo BBK, full it (DBA, Stoptech, Hawk)	SkAsphalt	Canada Classifieds	6	07-08-2015 07:17 PM
Brembo Rear Big Brake Kit Feeler	RUNAMUK	Brakes, Suspension, Chassis	18	06-17-2015 12:34 PM
OEM STi Brembo Calipers (black, 2012 STi take-offs)	murselyfe	Brakes, Suspension, Chassis	19	03-05-2015 06:31 PM
R35 Brembo Brakes - Full set	2013GTRNate	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	8	10-06-2012 10:08 AM

02-02-2017, 07:52 AM	#2
BigTuna Senior Member Join Date: Jun 2015 Drives: 2013 WRB BRZ Location: Ohio Posts: 672 Thanks: 258 Thanked 477 Times in 275 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Awhhh, gonna get yelled at for not having rule #2 in your pic. __________________ 2013 WRB "Build" Thread

02-02-2017, 08:22 PM	#9
Mvhs09 Senior Member Join Date: Mar 2016 Drives: Brz Location: Mn Posts: 493 Thanks: 16 Thanked 261 Times in 181 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Come to mn to install and deal lol. And paint them black again... Oh so tempting

User Name		Remember Me?
Password