FRS / BRZ Intake Manifold - Development Thread - FT-86SpeedFactory by Velox

[cdrazic93]

Originally Posted by Calum

No. I know ft86sf. Wonderbar is a chocolate bar if I'm not mistaken. I have never heard of a driveway lab. I get the impression you're trying to get at something but I have no idea what that may be.

Calum, youre too smart for this. I see your ruse. Nice try

[cdrazic93]

If cooling the intake charge is benefitial, there has to be a point at which its harmful.

If i were to add cooling lines from the intake, intake charge pipe, and manifold there would be consiquences right?

[Calum]

Originally Posted by Andrew025

You really haven't heard of those?
Wonderbar makes the driveway labs diffusers, he is not a paying vendor on here.
There is some... I guess you could say, some people have had disagreements about how they have gone about selling/advertising.
He never specifically advertises the item but it is known he makes them and where to buy them and posts in the threads about them.
He never does any actual "advertising" though.

Thanks, I don't frequent thecosmetic subs. I'd never seen that.

Originally Posted by cdrazic93

Calum, youre too smart for this. I see your ruse. Nice try

No ruse. But thanks for the compliment.

[FT-86 SpeedFactory]

Plenty of updates coming on this item guys. Sit tight and lets not let the ban hammer ruin the great discussion. Lots of other great things in the works too.

[Blu-by-U]

Originally Posted by uspspro

This forum is such a joke sometimes, which is too bad really.

Originally Posted by nelsmar

Seriously?! Eric just designs the parts for ft86sf. This shit better get resolved...

Whichever vendor complained you can suck a fat cock.

Originally Posted by jdv14476

Hickory, ****ory, doc.
This intake is on the clock,
And by months end,
the dyno will send,
Some numbers we all want a lot.

No kidding, I get censored for a poem and others don't get censored.

[chaoskaze]

I was reading this thread like a kid who just found his toy then came with ban hammer........ridiculous. Keep up the good stuff!

[Calum]

Originally Posted by cdrazic93

If cooling the intake charge is benefitial, there has to be a point at which its harmful.

If i were to add cooling lines from the intake, intake charge pipe, and manifold there would be consiquences right?

To the best of my knowledge, not that has been found so far. Carbed engines, and port injected engines that move the injector to the beginning of the manifold port, make measurably more power than a traditional port injected motor because of the way the fuel will collect along the runner and then evaporate. A few years ago I came across a video showing this effect. In the video an engine running at full power on an engine dyno would develop a layer of frost on its intake manifold. If the engine builder moved the injectors closer to the head it wouldn't cool the intake manifold and thus the intake air, and they lost some power.

I guess if it gets to a point that the density of the air and thus the larger amount of oxygen available is overshadowed by the heat required to burn that oxygen then cooling the intake charge would be less beneficial. I'd love to hear from @arghx7 on the subject though. Also I wonder if there's a point that the air density could increase cylinder pressures to the point that it wouldn't be possible to maintain MBT?

[Calum]

Originally Posted by jdv14476

No kidding, I get censored for a poem and others don't get censored.

No body censored you in particular. That word is filtered for everyone.




Stop the damn conspiracy theories people. Nobody is out to get anyone. This site is a business venture for it's owner, nothing more.

[Blu-by-U]

Originally Posted by Calum

No body censored you in particular. That word is filtered for everyone.




Stop the damn conspiracy theories people. Nobody is out to get anyone. This site is a business venture for it's owner, nothing more.

Seems to me that their filter isn't quite what it should be then.

[Struckbylitenin]

Originally Posted by Calum

This site is a business venture for it's owner, nothing more.

100% correct.

[VerusEric]

Please guys... lets forget about the ban, it happened.

Back onto updates. Transitions are completed. Material is 6061-T6.

[cdrazic93]

Originally Posted by Calum

No ruse. But thanks for the compliment.

Wonderbar is an Aero designer who makes nice lips for the platform. Driveway Labs makes Diffusers.

[Struckbylitenin]

Originally Posted by NotEric6

Please guys... lets forget about the ban, it happened.

Back onto updates. Transitions are completed. Material is 6061-T6.

someone already fapped on those parts

I was thinking, is it a coincidence that this is in development at the same time as the turbo kit?
If it's been already mentioned I apologize, I'm just here for the parts-pr0n.

[Captain Snooze]

I am not suggesting it would be practical/feasible/doable but I think it would be ultra cool to make the housing around the the trumpets from a clear material so one could see the inlets in all their glory.