Innovate Motorsports Twin Screw Supercharger Kit for FR-S/BRZ

[xxscaxx]

Originally Posted by Draco-REX

As he said, from the earlier discussions.

The Horsepower curves are from the chart released by Bullet down under.

The Torque curves were extrapolated from the HP curves. [ HP = (TQ*RPM)/5252 ]

The written in numbers were derived by comparing the baseline numbers of Bullet's dyno to those expected from a car with 15% driveline loss to create a correction factor which was applied to the Bullet graph.

The "Feel the Power!" line was added by Visconti to the uncorrected and aproximated graph.

So we have a rough ide of what we will see. But there's still some very lage sources of error. First, there's only anecdotal evidence that the Bullet HP graph was done with the Stage 2 kit. It may have been done with the Stage 1 kit. Secondly, it is an early graph from a while ago. Development has continued, so we could see some significant differences. And lastly, this graph was generated on Aussie fuel, using a low-reading dyno, and then it was aprroximated, re-written, and a simplistic correction applied to it.

This is dead-reckoning in its entirety,so don't take it as gospel.

Thanks for clearing that up, I apparently am

I wish people would stop posting that crap though. I knew it was thrown together because of visconti's comments I just wasn't sure where those numbers came from, and the more people who come in here and just see random dyno sheets are going to be asking questions about it. I just think it clutters an already severely cluttered thread.

[polancd]

And still nothing has changed, I guess ill come back next week. With all these high expectations I can't wait till next week to read all the posts with so i can

[nonicname]

Originally Posted by polancd

And still nothing has changed, I guess ill come back next week. With all these high expectations I can't wait till next week to read all the posts with so i can

come back next year maybe there'll be a dyno.

[civicdrivr]

My problem with the lack of info (and missed deadlines for releasing said info) is this raises a question of what will happen once Innovate/Bullet/whomever has our money. Will the ship dates constantly be pushed back? I've already been through that once on this forum *cough*SRT*cough*, I'm not keen on traveling down that road again.

If there is a reason that they cannot release the dynos, tell us. Transparency goes a very long way towards earning customer loyalty.

Sent from my Nexus 4

[Frostyman]

I won't order through innovate by any stretch of the imagination. I'll go through a dealer who has one, or is willing to get one in stock.

[Carwhisperer]

Originally Posted by Frostyman

I won't order through innovate by any stretch of the imagination. I'll go through a dealer who has one, or is willing to get one in stock.

I'm more than likely going to take a week of PTO and drive to wherever John is and get it from him directly and get it put on as well. Don't have to worry about shipping issues because i've had some terrible experiences in the past im still dealing with.

[Pure Automotive]

Originally Posted by Carwhisperer

I'm more than likely going to take a week of PTO and drive to wherever John is and get it from him directly and get it put on as well. Don't have to worry about shipping issues because i've had some terrible experiences in the past im still dealing with.

Drive to me and I'll put it in, I deal with John directly

[Carwhisperer]

Originally Posted by Pure Automotive

Drive to me and I'll put it in, I deal with John directly

Sounds good.

[Pure Automotive]

Where in TN are you from? I was born in Johnson City, my whole family lives there.

[Carwhisperer]

Originally Posted by Pure Automotive

Where in TN are you from? I was born in Johnson City, my whole family lives there.

South Nashville. Closer to Brentwood area.

[Carwhisperer]

Didn't see this posted yet on here. Nice to hear the car accelerating without boost.

[ame="http://www.youtube.com/watch?v=Uu_EzM_PkyU"]Innovate Motorsports: Mild dyno pulls, Non-Intercooled Twin-Screw Supercharger, Scion FRS - YouTube[/ame]

"We will have some more videos and data to post shortly."-From InnovateMotorsports Posted on the 5th.

Little longer fellas.

[Ruckus]

mmmm 3rd gear

[Murseman27]

Originally Posted by Carwhisperer

Didn't see this posted yet on here. Nice to hear the car accelerating without boost.

"We will have some more videos and data to post shortly."-From InnovateMotorsports Posted on the 5th.

Little longer fellas.

@mines13 if i am not mistaken is this your car?

[Ruckus]

Originally Posted by Murseman27

@mines13 if i am not mistaken is this your car?

lol i recognized the adjuster things also