BRZ advise on changing front pipe or not

[PulsarBeeerz]

Originally Posted by SuperTom

what type of rear flange is on that front pipe? Im hoping a 70mm flat flange and not a donut flange. Pictures of it on their site don't show the rear

Thanks

It is indeed a 70mm flat flange.

[SuperTom]

Originally Posted by PulsarBeeerz

It is indeed a 70mm flat flange.

Thanks I read in another thread someone said it was 3" on the back side. It wouldn't make sense if the pipe is 2.75/70mm all the way through

[wparsons]

Originally Posted by Jfheisenberg

Hi all - Following on my post above; reason for the rasp was because my invidia n1 catback had 3 bad gaskets and it was leaking very bad. I got it fixed and Its a bit better but still too much drone and rasp for me.

I went to a resonator shop and they tell me that they can fit a walker resonator in my mid pipe for about $250. Does this sound good in terms price and potentially reducing the drone/rasp.

My other option is to get the invidia q300 which i know for sure it will kill most of the drone and rasp.

The JDL ultra quiet front pipe is the best non stock front pipe option for killing rasp, but the N1 can be raspy even on a stock header/overpipe/front pipe setup.

https://jdlautodesign.com/collection...ft86-frontpipe <- pick the catted and resonated option

The Q300 will definitely kill the rasp and drone, but it'll also be a totally different tone/volume.