10-14-2019, 11:59 AM | #1 |
Senior Member
Join Date: Mar 2014
Drives: JDL Turbo BRZ
Location: EG, RI
Posts: 450
Thanks: 46
Thanked 305 Times in 140 Posts
Mentioned: 2 Post(s)
Tagged: 2 Thread(s)
|
Partial JDL V2 "no-cut" Turbo Kit with Extras
Car was in an unfortunate accident and a total loss. Some hot parts have melted black plastic on them that stained. This is by no means a perfect or complete kit. Surprisingly the ONLY piece that was damaged from the accident was an intercooler pipe that runs behind the passenger side headlight due to the no-cut routing option. I have only ever run Millers Nanodrive CFS 5w-30 oil through this turbo. It has seen over 10 track days and has never had a single issue. No smoke or leaks at all. I would like to be as transparent as possible with this deal, so if you have any questions, please contact me.
You will receive: - UEL Header [One bolt broke upon removal. Drilled and tapped the bore seemed to clean it up very well. New bolt threads in and holds just fine] - GTX 2860R Gen2 - Turbosmart BOV - Precision Wastegate [6psi installed, have all the springs in a box] - Omni 3bar map sensor - Turbo restrictor, drain flange and oil feed line and drain line included - Various silicon couplers and clamps - ECUTek Dongle & Cable - Delicious Tuning EBCS - K&N Cone filter [about 1k miles on this new one] - Recirculated wastegate option - "no-cut" intercooler pipe routing - Black powdercoated intercooler pipes - Bronze Cerakote on all hot parts You will need: - 2x 45 degree couplers but you may as well replace them all - some new t-bolt clamps [They could all be replaced, but I will include what I have] - Oil pan with -10an male flange [could not remove from car] - All new gaskets [Might be worth it to reach out to JDL to see if they can put together a gasket kit for you] - New charge pipe from intercooler to MAF pipe [quoted $110+ shipping from JDL including powdercoat] - Various vacuum line from wastegate and bov - Tune ***************************** Complete kit options for $6,028.99 w/ ECUTek Selling for $3,400 FIRM. Local CASH only. Located in East Greenwich, Rhode Island. Willing to drive about an hour into MA or CT to meet up. ***************************** I will also throw in a Mocal thermostatic sandwich plate to be used with your choice of oil cooler. I ran a JDL cooler but that was also damaged in the accident. The hoses might be OK. You can have those too Pics https://imgur.com/a/xtrH8zK Updated Pics https://imgur.com/a/WpcnttZ Last edited by Jesse36m3; 12-03-2019 at 07:48 PM. Reason: Updated Pics w/ username |
11-09-2019, 01:15 PM | #2 |
Senior Member
Join Date: Mar 2014
Drives: JDL Turbo BRZ
Location: EG, RI
Posts: 450
Thanks: 46
Thanked 305 Times in 140 Posts
Mentioned: 2 Post(s)
Tagged: 2 Thread(s)
|
Price lowered to $3600. Anybody want this??
|
11-09-2019, 05:23 PM | #3 |
Senior Member
Join Date: Mar 2018
Drives: Bone stock
Location: Windsor, CT
Posts: 767
Thanks: 535
Thanked 232 Times in 162 Posts
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
|
I do lol. Just don't have the funds yet. I bought the hotchkiss from you.
Sent from my SM-N960U using Tapatalk |
The Following User Says Thank You to Joveen For This Useful Post: | Jesse36m3 (11-13-2019) |
12-03-2019, 07:48 PM | #4 |
Senior Member
Join Date: Mar 2014
Drives: JDL Turbo BRZ
Location: EG, RI
Posts: 450
Thanks: 46
Thanked 305 Times in 140 Posts
Mentioned: 2 Post(s)
Tagged: 2 Thread(s)
|
Price lowered to $3,400.
|
12-13-2019, 03:30 PM | #5 |
BRZ Wannabee
Join Date: Jan 2017
Drives: 2013 Limited BRZ
Location: Worcestor, MA
Posts: 94
Thanks: 4
Thanked 4 Times in 2 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
External wastegate? I live up in MA and this looks mighty tempting!!
|
12-13-2019, 04:21 PM | #6 | |
Senior Member
Join Date: Mar 2014
Drives: JDL Turbo BRZ
Location: EG, RI
Posts: 450
Thanks: 46
Thanked 305 Times in 140 Posts
Mentioned: 2 Post(s)
Tagged: 2 Thread(s)
|
Quote:
Yes. It has a 38mm Precision wastegate that I left bolted up on the header. Have all the springs in a box too. Let me know if you're interested and/or want to check it out. I'll let you have everything for 3200 picked up. |
|
12-22-2019, 06:19 PM | #7 |
Senior Member
Join Date: Mar 2014
Drives: JDL Turbo BRZ
Location: EG, RI
Posts: 450
Thanks: 46
Thanked 305 Times in 140 Posts
Mentioned: 2 Post(s)
Tagged: 2 Thread(s)
|
Sold
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: 2013 PTUNING Turbo Scion FRS "BABY LFA" - 61k Miles - $22k | FRSTRM | Cars for Sale/Trade | 7 | 01-15-2018 06:21 PM |
Partial Part Out, Engine, Turbo Kit with 3" exhaust, Driveshaft, Transmision | Sportsguy83 | Engine, Exhaust, Bolt-Ons | 8 | 02-16-2017 05:25 PM |
maxjedi's turbo "daily drifter" GT86 | maxjedi | Member's Car Journals | 3 | 06-12-2015 02:41 AM |
"My Dealer told me {insert dumb idea}" (was "Toyota/Subary Partnership Cancelled?") | levifig | BRZ First-Gen (2012+) -- General Topics | 48 | 08-09-2013 06:34 PM |