Installed/How-To: 2014 Forester XT OEM Oil Cooler(pics!) - Page 13 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

M1K3 · 11-26-2013, 02:39 PM

Amazon carries [ame="http://www.amazon.com/Techflex-PTN0-50BK25-General-Purpose-Braided/dp/B004UHQNUU/ref=sr_1_6?s=electronics&ie=UTF8&qid=1385495013&sr =1-6"]Techflex[/ame]

post_break · 11-27-2013, 10:21 AM

Well the Oil Cooler Connector is back ordered to eternity.

I just talked to Shawn over at Subarupartswarehouse.com and ordered the STI bolt from a 2008 model. He said if it doesn't work I can send it back for a full refund which is badass. I'll update if it does in fact work, there were more in stock too.

autobrz · 11-27-2013, 11:03 AM

Has anyone logged oil temps on the track with this oil cooler?

^^ my dealer is also still waiting on the oil cooler and connector.

The Slow One · 11-27-2013, 12:01 PM

I'm going to record my track logs this weekend

Sent from my SGH-T889 using Tapatalk

CARNZ · 11-27-2013, 12:54 PM

If the 08 STi oil cooler connector works let me know and I will add it to the list on the first page as an alternate piece.

post_break · 11-28-2013, 01:22 PM

Quote:

Originally Posted by CARNZ

If the 08 STi oil cooler connector works let me know and I will add it to the list on the first page as an alternate piece.

Will do. Also know that the new WRX has an oil cooler just like this. I would assume 2014 model, the one with the six speed.

CARNZ · 11-28-2013, 01:52 PM

Quote:

Originally Posted by post_break

Will do. Also know that the new WRX has an oil cooler just like this. I would assume 2014 model, the one with the six speed.

Once a 2015 wrx makes it to our dealer, I am going to look it over and see if their water pipe will be a better fit than the FXT one.

post_break · 11-28-2013, 03:23 PM

Quote:

Originally Posted by CARNZ

Once a 2015 wrx makes it to our dealer, I am going to look it over and see if their water pipe will be a better fit than the FXT one.

It's top mount oil filter too so the oil cooler should work on our car as well.

CARNZ · 11-28-2013, 03:34 PM

the cooler is probably the same part number as the FXT since its basically the same engine. I just wanna see that water line since some people have expressed concerns about the current FXT solution

The Slow One · 12-01-2013, 03:48 AM

This is my oil temps with the first session of the day, I only logged 2 sessions, I can upload my afternoon session(slightly higher ambient) if anyone requests for it. My other sessions were running my lap timer.

M1K3 · 12-01-2013, 08:35 AM

Quote:

Originally Posted by The Slow One

I can upload my afternoon session(slightly higher ambient) if anyone requests for it.

Yes, please do. Also what was the actual Max Oil Temps that you hit? Thanks

The Slow One · 12-01-2013, 01:14 PM

Can do

I my last track event was on October 26-27 at the same track but I peaked at around 294f in oil temps. The ambient temps were in the mid 80s those days though. Sadly I accidentally cleared all my logs before I was able to email them to my account.

track junkie · 12-01-2013, 05:02 PM

The OEM oil cooler looks great for track use. A manual by-pass valve for closing off the oil cooler when driving on the street might be beneficial to prevent oil temperatures from being too cold.

The Slow One · 12-01-2013, 06:14 PM

no need for it, the cooler cooler acts as a oil warmer for faster warm ups, while cruising to the track, my oil temps tend to be 6-8 degrees above my water temp.

just to add as well, it was 40 degrees outside when i went to the track that morning.

11-27-2013, 11:03 AM	#171
autobrz Senior Member Join Date: May 2013 Drives: Mazda 3 Location: round rock, tx Posts: 413 Thanks: 487 Thanked 108 Times in 74 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Has anyone logged oil temps on the track with this oil cooler? ^^ my dealer is also still waiting on the oil cooler and connector. Last edited by autobrz; 11-27-2013 at 11:14 AM.

11-27-2013, 12:54 PM	#173
CARNZ CHECK ENGINE Join Date: Aug 2013 Drives: 2004 STi Location: White Marsh, MD Posts: 158 Thanks: 91 Thanked 234 Times in 63 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	If the 08 STi oil cooler connector works let me know and I will add it to the list on the first page as an alternate piece. __________________ i don't cry about crickets

11-28-2013, 03:34 PM	#177
CARNZ CHECK ENGINE Join Date: Aug 2013 Drives: 2004 STi Location: White Marsh, MD Posts: 158 Thanks: 91 Thanked 234 Times in 63 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	the cooler is probably the same part number as the FXT since its basically the same engine. I just wanna see that water line since some people have expressed concerns about the current FXT solution __________________ i don't cry about crickets

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Oil cooler from the 2.0 DIT Forester	Kostamojen	Engine, Exhaust, Transmission	119	09-10-2019 05:28 AM
Bought a 2014 Subaru Forester	EAGLE5	Other Vehicles & General Automotive Discussions	10	10-02-2013 12:54 PM
2014 Forester key fob - nicer than BRZ	Turbowned	Cosmetic Modification (Interior/Exterior/Lighting)	3	04-17-2013 03:35 PM
BRZ 2.0L Turbo in 2014 Forester	Sleeperz	BRZ First-Gen (2012+) -- General Topics	37	03-21-2013 06:42 PM
Review after test driving a 2013 WRB BRZ and 2014 Forester in Okinawa, Japan…	2013GTRNate	BRZ First-Gen (2012+) -- General Topics	12	02-01-2013 12:29 PM

11-26-2013, 02:39 PM	#169
M1K3 Senior Member Join Date: Jun 2012 Drives: vrooom... Location: NOVA Posts: 260 Thanks: 287 Thanked 209 Times in 115 Posts Mentioned: 0 Post(s) Tagged: 3 Thread(s)	Amazon carries [ame="http://www.amazon.com/Techflex-PTN0-50BK25-General-Purpose-Braided/dp/B004UHQNUU/ref=sr_1_6?s=electronics&ie=UTF8&qid=1385495013&sr =1-6"]Techflex[/ame]

12-01-2013, 05:02 PM	#181
track junkie Member Join Date: May 2013 Drives: 2022 Subaru BRZ Location: MO Posts: 98 Thanks: 29 Thanked 67 Times in 35 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	The OEM oil cooler looks great for track use. A manual by-pass valve for closing off the oil cooler when driving on the street might be beneficial to prevent oil temperatures from being too cold.

User Name		Remember Me?
Password