Rocket Bunny build - Full mod list w/ lots of photos

[vividracing]

Here is a build we did for a customer on their brand new 2014 FR-S

• Vortech Complete Supercharger System Subaru FRS|BRZ|FT86

• Agency Power Catback Exhaust Scion FR-S / Toyota GT-86 / Subaru BRZ 13+

• Rocket Bunny FR-S/BRZ Version 2 Full Kit w/out DRL

• Rocket Bunny DRL Kit for Ver-2 kit 10-LED lights

• AUTO CRAFT 86/BRZ/FR-S Left Steering A.C.E+ 3 gauge panel Carbon 60mm

• Prosport 60mm Premium Evo Electrical Boost Gauge

• Prosport 60mm Premium Evo Electrical Oil Pressure Gauge

• Prosport 60mm Premium EVO Wideband Digital Air Fuel Ratio kit

• AirREX Air Strut Complete Kit FRS/BRZ 13+

• AirREX Digital Air Management System Enclosed Box Kit FRS/BRZ 13+

• PPE FR-S / BRZ Race Equal Lenth Header (4-1) w/ Over Pipe

• PPE High-flow Catalytic Converter Mid-Pipe Scion FR-S / Subaru BRZ / Toyota 86

• Vortech FR-S BRZ Supercharger Pulley Kit (3.1 Pulley)

• Cusco 6pt Roll Cage FRS/BRZ 13+

• ZEX Show” Purge Kit [Universal]

• ZEX Dual Outlet Purge Kit [Universal]

• Brembo GT 14 Inch 6 Piston 2pc Slotted Front Brake Kit Subaru BRZ / Scion FR-S / Toyota GT-86 13+***Yellow***

• Brembo GT 13.6 Inch 4 Piston Monoblock Rear 2pc Slotted Brake Kit Subaru BRZ / Scion FR-S / Toyota GT-86 13+***Yellow***

• Work VS XX Full Reverse Wheel 19×11

• Work VS XX Full Reverse Wheel 19×9.5

• Project KICS 11mm PCD Conversion Spacer Pair 5×100 to 5×114.3

• Hankook V12 K110 255/35/19 tire

• Hankook V12 K110 295/30/19 tire

• Motorsport Technology Adapter – Hub & Wheel Centric for Subaru FRS 5×100-5×114.3 73.3mm bore

[kota1080]

Looks great

[OICU812]

Final price tag?

[Maverick22]

you guys better add it to the rocket
bunny registry. Link below.

[King Tut]

I know I already replied to this thread, but I see that it was deleted. Anyways, nice dog picture. Also, please remove the blue tape on the pedals before he drives it. Also that is a very dangerous cage design, and I hope he is wearing a helmet when he drives it on the street.

[JerryMichaels7]

but that cage is mad jdm tyte yo

[mackdaddytran]

Originally Posted by King Tut

I know I already replied to this thread, but I see that it was deleted. Anyways, nice dog picture. Also, please remove the blue tape on the pedals before he drives it. Also that is a very dangerous cage design, and I hope he is wearing a helmet when he drives it on the street.

I know nothing about cages, can you explain how it's dangerous?

[suaveflooder]

I think I still prefer the origional kit, but this still looks pretty bad ass!!

[King Tut]

Originally Posted by mackdaddytran

I know nothing about cages, can you explain how it's dangerous?

Normally you want that dash/A pillar bar as close to the A pillar as possible, but because this is a "show" cage, it has that crazy bend to avoid having to cut the dash. That makes it closer to the driver where in an accident his body could come in contact with it and get further damaged. It should at a minimum have some SFI approved padding anywhere he can make contact with it.

[vividracing]

Thanks for the feedback guys.

[Lawn_Mower]

Crazy to see all of that work done on an automatic car.

[yohan04]

Originally Posted by King Tut

Normally you want that dash/A pillar bar as close to the A pillar as possible, but because this is a "show" cage, it has that crazy bend to avoid having to cut the dash. That makes it closer to the driver where in an accident his body could come in contact with it and get further damaged. It should at a minimum have some SFI approved padding anywhere he can make contact with it.

That and also, (welded) cage needs fixed seats/harness to work as a system...clean build nevertheless.




"AWWW IT's AUTOMATIC...."

[Jyn]

Great work, but echo the comments of having a cage for a street car - not safe. Hopefully the customer realizes this sooner than later. Regardless, everything looks clean!

[Grassroots_BRZ]

Looks crazy.