License plate rubbing on Trunk - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Jayde · 08-07-2012, 09:05 AM

Anyone else noticing the rear license plate rubbing on the trunk, causing scuffs to the clear coat? My guess is since our trunks only use 2 bolts for mounting. I'm not using a frame on the plate, but I'm curious to hear if anyone who is using a frame if they're getting scuffs too. Also, in general, what are you guys doing to help prevent this?

Here's a pic of what I'm talking about. You can see the scuffs at the top right and lower left.

Here's another

ngabdala · 08-07-2012, 09:09 AM

There are quite a few members here that are having the same issue.

Quote:

Originally Posted by Jayde

Anyone else noticing the rear license plate rubbing on the trunk, causing scuffs to the clear coat? My guess is since our trunks only use 2 bolts for mounting. I'm not using a frame on the plate, but I'm curious to hear if anyone who is using a frame if they're getting scuffs too. Also, in general, what are you guys doing to help prevent this?

Here's a pic of what I'm talking about. You can see the scuffs at the top right and lower left.

Here's another

HunterGreene · 08-07-2012, 09:17 AM

The only thing I can suggest is some kind of foam tape that you can adhere to the back of the plate. Thanks for the heads up, I'll have to guard against this when I get my car.

Boosted · 08-07-2012, 09:29 AM

I used 3m foam tape and applied it the backside edges of my license plate. This way you dont ever have to worry about marks or rattling. Plus the adhesive is on the plate in case you want to change something later.

AbidingDude · 08-07-2012, 09:31 AM

Quote:

Originally Posted by Boosted

I used 3m foam tape and applied it the backside edges of my license plate. This way you dont ever have to worry about marks or rattling. Plus the adhesive is on the plate in case you want to change something later.

Exactly what I did. Even have a frame around my plate.

Jayde · 08-07-2012, 09:40 AM

Quote:

Originally Posted by Boosted

I used 3m foam tape and applied it the backside edges of my license plate. This way you dont ever have to worry about marks or rattling. Plus the adhesive is on the plate in case you want to change something later.

May I ask where you got this?

Also, is the adhesive on both sides of the foam or just one side?

Boosted · 08-07-2012, 09:44 AM

It is one sided and it can be found at any car parts store. The brand I got was 3M since it looked more durable.

Jayde · 08-07-2012, 09:47 AM

Quote:

Originally Posted by Boosted

It is one sided and it can be found at any car parts store. The brand I got was 3M since it looked more durable.

Thanks. By any chance, do you have a part number of it?

Boosted · 08-07-2012, 09:53 AM

I dont sorry. It is a very stocked item with varying lengths for various applications.

OrbitalEllipses · 08-07-2012, 10:21 AM

License plate frame I purchased came with nearly 1/2" spacers/standoffs for the mounts. Y'all might wanna look into that.

Hawaiian · 08-07-2012, 10:31 AM

Quote:

Originally Posted by Boosted

I used 3m foam tape and applied it the backside edges of my license plate. This way you dont ever have to worry about marks or rattling. Plus the adhesive is on the plate in case you want to change something later.

You apply the foam to the car not the plate! Dirt particles can get between the foam and car making it act like sandpaper. If the foam is adhered to the vehicle, the pad will protect your paint.

sho220 · 08-07-2012, 10:34 AM

Quote:

Originally Posted by Jayde

Thanks. By any chance, do you have a part number of it?

A part number? For foam tape???

Jayde · 08-07-2012, 10:58 AM

Quote:

Originally Posted by OrbitalEllipses

License plate frame I purchased came with nearly 1/2" spacers/standoffs for the mounts. Y'all might wanna look into that.

Link to said frame?

Quote:

Originally Posted by Hawaiian

You apply the foam to the car not the plate! Dirt particles can get between the foam and car making it act like sandpaper. If the foam is adhered to the vehicle, the pad will protect your paint.

I was thinking this. I did pick up some foam from CarQuest. It's Campers Tape. Single side adhesive that's quite soft and 3/16th think.

If the foam is making good contact with the trunk, wouldn't dirt not get between the two, regardless if it was on attached on the trunk or plate?

Quote:

Originally Posted by sho220

A part number? For foam tape???

There's a part number for everything!

Hawaiian · 08-07-2012, 11:10 AM

Quote:

Originally Posted by Jayde

I was thinking this. I did pick up some foam from CarQuest. It's Campers Tape. Single
If the foam is making good contact with the trunk, wouldn't dirt not get between the two, regardless if it was on attached on the trunk or plate?

Between water, and bouncing from random potholes, you'd be shocked at the ability of dirt particles to get where you don't want them.

08-07-2012, 09:05 AM	#1
Jayde Senior Member Join Date: Jan 2012 Drives: 2013 Satin White Pearl BRZ Limited Location: Poughkeepsie, NY Posts: 2,310 Thanks: 751 Thanked 696 Times in 464 Posts Mentioned: 47 Post(s) Tagged: 1 Thread(s)	License plate rubbing on Trunk Anyone else noticing the rear license plate rubbing on the trunk, causing scuffs to the clear coat? My guess is since our trunks only use 2 bolts for mounting. I'm not using a frame on the plate, but I'm curious to hear if anyone who is using a frame if they're getting scuffs too. Also, in general, what are you guys doing to help prevent this? Here's a pic of what I'm talking about. You can see the scuffs at the top right and lower left. Here's another __________________ ◄Tri-State Owners Club, Facebook Group► *BRZerhood*

08-07-2012, 09:29 AM	#4
Boosted Senior Member Join Date: Apr 2012 Drives: 13 brz, 06 STI Location: Mid-Atlantic region Posts: 268 Thanks: 59 Thanked 135 Times in 82 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	I used 3m foam tape and applied it the backside edges of my license plate. This way you dont ever have to worry about marks or rattling. Plus the adhesive is on the plate in case you want to change something later. __________________ 2013 BRZ Limited build: http://www.ft86club.com/forums/showt...d=1#post586737 2006 STI- lots of go fast goodies 551whp/491 Tq on 93(weekend car) 1988 CRX si- b16A1 (Sold) RIP 2003 WRX

08-07-2012, 09:44 AM	#7
Boosted Senior Member Join Date: Apr 2012 Drives: 13 brz, 06 STI Location: Mid-Atlantic region Posts: 268 Thanks: 59 Thanked 135 Times in 82 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	It is one sided and it can be found at any car parts store. The brand I got was 3M since it looked more durable. __________________ 2013 BRZ Limited build: http://www.ft86club.com/forums/showt...d=1#post586737 2006 STI- lots of go fast goodies 551whp/491 Tq on 93(weekend car) 1988 CRX si- b16A1 (Sold) RIP 2003 WRX

08-07-2012, 09:53 AM	#9
Boosted Senior Member Join Date: Apr 2012 Drives: 13 brz, 06 STI Location: Mid-Atlantic region Posts: 268 Thanks: 59 Thanked 135 Times in 82 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	I dont sorry. It is a very stocked item with varying lengths for various applications. __________________ 2013 BRZ Limited build: http://www.ft86club.com/forums/showt...d=1#post586737 2006 STI- lots of go fast goodies 551whp/491 Tq on 93(weekend car) 1988 CRX si- b16A1 (Sold) RIP 2003 WRX

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
License plate ideas	Laika	Off-Topic Lounge [WARNING: NO POLITICS]	142	06-13-2015 08:17 PM
My new license plate	Techknowfile	Scion FR-S / Toyota 86 GT86 General Forum	4	07-12-2012 07:57 AM
No License Plate?	tjdiz92	NY / NJ / CT / PA	19	06-25-2012 02:14 PM
SG886 license plate	ToxicSneakers	Off-Topic Lounge [WARNING: NO POLITICS]	0	06-18-2012 05:35 PM
Another license plate idea....	michaelahess	Cosmetic Modification (Interior/Exterior/Lighting)	4	06-07-2012 08:24 PM

08-07-2012, 09:17 AM	#3
HunterGreene Hail Magnet Join Date: Jun 2012 Drives: Firestorm FR-S: "Artemis" Location: Cleveland, OH Posts: 4,578 Thanks: 3,386 Thanked 3,195 Times in 1,633 Posts Mentioned: 43 Post(s) Tagged: 2 Thread(s)	The only thing I can suggest is some kind of foam tape that you can adhere to the back of the plate. Thanks for the heads up, I'll have to guard against this when I get my car.

08-07-2012, 10:21 AM	#10
OrbitalEllipses Banned Join Date: Jan 2012 Drives: Attitude Location: MD Posts: 10,046 Thanks: 884 Thanked 4,889 Times in 2,902 Posts Mentioned: 123 Post(s) Tagged: 4 Thread(s)	License plate frame I purchased came with nearly 1/2" spacers/standoffs for the mounts. Y'all might wanna look into that.

User Name		Remember Me?
Password