FA20 Engine in MINT condition only 3000 miles on it (SOLD) - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

GT86Asia · 04-22-2017, 06:58 PM

Alright guys, maybe you remember maybe you don't, I put a post here back in January, I'm assuming mods deleted it....but any way.
As promised, my engine is finally here from overseas.

As you guys can see, the crate has been opened up and the engine thoroughly checked at my local shop. The engine is in mint condition, and it only has 3000 miles on it. Below there is a list of all the things that come with the engine. It is not just a bare bones engine, it comes with many of the componentry that our engine will need to be able to run, as well as a couple of upgrades. It also comes with the EcuTek license already installed in the Ecu, and that alone is like $300+ of value.

The engine was always ran Naturally aspirated, never boosted. And actually if you see my most recent posted threads, all those parts that I sold were parts that were installed on this same engine.

List of all components attached to the engine:
Complete long block assembly
Crank angle plate
Intake manifold, fuel injectors and throttle body
Alternator
A/C compressor
Wiring harshness and all sensors
Front and rear O2 sensors
Starter
Complete hi pressure fuel system and fuel system computer
Engine mounts
Aftermarket Light Weight Pulley kit
OEM pulleys (included as spare parts)
Water pump and water neck
Thermostat
Spark plugs
Ignition coil packs
Crawford Power Blocks
Complete clutch kit with flywheel

The is one thing missing, and that is the oil measuring stick, when we opened the crate it wasn't there, but I'm sure you can get one for around 15 bucks.

The way I want to go about it is, I will not set a fixed price, but I'll be taking offers.

So bring your offers on!

coyote · 04-22-2017, 08:59 PM

20 AUD (Delivered)

Sent from my Nexus 6 using Tapatalk

GT86Asia · 04-23-2017, 01:53 AM

Quote:

Originally Posted by coyote

20 AUD (Delivered)

Sent from my Nexus 6 using Tapatalk

Greddy86 · 04-23-2017, 05:48 AM

Only 3k miles?

Do you have the compression #'s on all 4 cylinders?

GT86Asia · 04-23-2017, 03:47 PM

Quote:

Originally Posted by Greddy86

Only 3k miles?

Do you have the compression #'s on all 4 cylinders?

yep 3k miles or 5k kilometers, never got to the first oil change....

I do not have the compression numbers for the pistons sorry

JazzleSAURUS · 04-24-2017, 09:52 AM

Quote:

Originally Posted by coyote

20 AUD (Delivered)

Sent from my Nexus 6 using Tapatalk

$20 USD delivered.

GT86Asia · 06-28-2018, 01:22 PM

Hi ALL,

This was taken off the market because of a project that I Was going to do, but it didn't go through, so I'm putting it back on the market. Engine has not been installed, just been in my warehouse. So there is no change regarding the description above.

Let me know if anyone is interested.

Also, I will be posting a lot of parts for sale within the next week, stay tuned for more threads in the classified!

Thanks to all in advance!

Jon

elitegunslinger · 06-28-2018, 02:41 PM

How much shipped 08050?

racer1600 · 07-29-2018, 10:55 PM

Hello is the engine still for sale? I live up in LA and am looking for an engine. PM sent.

Sent from my Moto Z (2) using Tapatalk

chaoskaze · 07-29-2018, 11:02 PM

How much? Just looking out for a friend Incase of worst scenario.

Sent from my iPhone using Tapatalk

GT86Asia · 08-08-2018, 07:19 PM

SOLD! Thank you!

04-22-2017, 06:58 PM	#1
GT86Asia Senior Member Join Date: Oct 2015 Drives: 2016 BRZ Location: San Diego Posts: 156 Thanks: 7 Thanked 64 Times in 34 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	FA20 Engine in MINT condition only 3000 miles on it (SOLD) Alright guys, maybe you remember maybe you don't, I put a post here back in January, I'm assuming mods deleted it....but any way. As promised, my engine is finally here from overseas. As you guys can see, the crate has been opened up and the engine thoroughly checked at my local shop. The engine is in mint condition, and it only has 3000 miles on it. Below there is a list of all the things that come with the engine. It is not just a bare bones engine, it comes with many of the componentry that our engine will need to be able to run, as well as a couple of upgrades. It also comes with the EcuTek license already installed in the Ecu, and that alone is like $300+ of value. The engine was always ran Naturally aspirated, never boosted. And actually if you see my most recent posted threads, all those parts that I sold were parts that were installed on this same engine. List of all components attached to the engine: Complete long block assembly Crank angle plate Intake manifold, fuel injectors and throttle body Alternator A/C compressor Wiring harshness and all sensors Front and rear O2 sensors Starter Complete hi pressure fuel system and fuel system computer Engine mounts Aftermarket Light Weight Pulley kit OEM pulleys (included as spare parts) Water pump and water neck Thermostat Spark plugs Ignition coil packs Crawford Power Blocks Complete clutch kit with flywheel The is one thing missing, and that is the oil measuring stick, when we opened the crate it wasn't there, but I'm sure you can get one for around 15 bucks. The way I want to go about it is, I will not set a fixed price, but I'll be taking offers. So bring your offers on! Attached Images Last edited by GT86Asia; 08-08-2018 at 07:19 PM.

04-23-2017, 05:48 AM	#4
Greddy86 Platinum Member Join Date: Sep 2014 Drives: 86 Location: Diamond Bar, California Posts: 1,833 Thanks: 62 Thanked 118 Times in 99 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Only 3k miles? Do you have the compression #'s on all 4 cylinders? __________________ 86two6 Thursday Meets in SoCal. IG @86two6

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FA20 Complete Engine and Transmission - 14.1k miles	slicktop	Engine, Exhaust, Bolt-Ons	7	11-14-2014 11:18 AM
WTB: Mint condition whiteout FRS bumper	Hellafunctional	Exterior Parts (Aero, Lighting, Etc.)	0	10-22-2014 06:06 AM
WTB: OEM Hood - Mint condition	Jay2420	Canada Classifieds	7	10-09-2014 08:00 PM
At about 3000 Miles, Engine became quite a bit "smoother"	jflogerzi	Engine, Exhaust, Transmission	10	09-04-2012 12:11 AM

04-22-2017, 08:59 PM	#2
coyote Senior Member Join Date: Oct 2011 Drives: Slowly Location: brisbane.qld.au Posts: 1,064 Thanks: 212 Thanked 539 Times in 235 Posts Mentioned: 21 Post(s) Tagged: 1 Thread(s)	20 AUD (Delivered) Sent from my Nexus 6 using Tapatalk

06-28-2018, 01:22 PM	#7
GT86Asia Senior Member Join Date: Oct 2015 Drives: 2016 BRZ Location: San Diego Posts: 156 Thanks: 7 Thanked 64 Times in 34 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hi ALL, This was taken off the market because of a project that I Was going to do, but it didn't go through, so I'm putting it back on the market. Engine has not been installed, just been in my warehouse. So there is no change regarding the description above. Let me know if anyone is interested. Also, I will be posting a lot of parts for sale within the next week, stay tuned for more threads in the classified! Thanks to all in advance! Jon

06-28-2018, 02:41 PM	#8
elitegunslinger Senior Member Join Date: Oct 2016 Drives: 2014 BRZ Limited Location: NJ Posts: 120 Thanks: 10 Thanked 24 Times in 22 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	How much shipped 08050?

07-29-2018, 10:55 PM	#9
racer1600 Member Join Date: Jul 2018 Drives: 2013 FRS Location: Lancaster Califronia Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hello is the engine still for sale? I live up in LA and am looking for an engine. PM sent. Sent from my Moto Z (2) using Tapatalk

07-29-2018, 11:02 PM	#10
chaoskaze The Fail Boat Join Date: Aug 2011 Drives: CWP S.B. Location: LasVegas Posts: 3,028 Thanks: 4,718 Thanked 1,293 Times in 873 Posts Mentioned: 19 Post(s) Tagged: 0 Thread(s)	How much? Just looking out for a friend Incase of worst scenario. Sent from my iPhone using Tapatalk

08-08-2018, 07:19 PM	#11
GT86Asia Senior Member Join Date: Oct 2015 Drives: 2016 BRZ Location: San Diego Posts: 156 Thanks: 7 Thanked 64 Times in 34 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	SOLD! Thank you!

User Name		Remember Me?
Password