Clutch squeak, grind, groan TSB released. - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

misterfly · 04-12-2017, 11:58 AM

Thanks Tcoat, i will check this when i will go in the parking after the job

Quote:

Originally Posted by Tcoat

Tcoat · 04-12-2017, 12:09 PM

Quote:

Originally Posted by misterfly

Thanks Tcoat, i will check this when i will go in the parking after the job

Si vous avez ce probleme vous le saurez sans aucun doute!

Muaddib · 04-12-2017, 02:35 PM

When i was working at Toyota in 2014 i emailed Toyota many times in regards to this issue. No response from the north american head office. 3 years later they released the TSB when i am no longer with Toyota. Fuck my life.

number_Un0 · 04-12-2017, 06:53 PM

great! right when my warranty is over.

sato · 04-13-2017, 01:49 PM

Shit, I just got my TOB replaced under 5/60 warranty, but they used the 802 part. Well, at least they acknowledged something was wrong and I will have a solution TOB for purchasing when I have to replace it again at 100k miles.

Sigh-on-Rice · 04-13-2017, 09:00 PM

Thanks for the info. I updated the TSB Thread to point to this thread for now. Can't wait until there is a PDF for this TSB. I got this fixed as well, but with an older parts

Ragin Gti · 04-14-2017, 08:06 AM

Subaru TSB 03-77-17, dated 1/3/17, for a "rotational sound from clutch release bearing". New TOB part # 30502AA150. Covers '13-'17 BRZ. New bearing installed in cars from VIN H*600825 and up.

Sent from my iPhone using Tapatalk

PWBRZ · 04-14-2017, 02:39 PM

Well, no pdf (yet) but here's the summary description from the techinfo.subaru.com website:

-Qte-
“Rotational” Sound from Clutch Release Bearing

This bulletin announces a change to the internal lubricating grease used during assembly of the clutch release bearing for BRZ models. In cases where drivers have a tendency to rest their foot on the clutch pedal, doing so can cause the bearing to overheat. As a result, the grease inside the bearing can break down and over time, cause a “whirring” or rotational-type sound to develop. The new clutch release bearing contains a grease which is more resistant to heat while maintaining proper lubrication.
-Unqte-

exE36M3 · 04-14-2017, 03:52 PM

Yikes 3.7 hours... NorCal dealer labor rate is about $250/hour.
If you guys have this issue - get into the shop NOW. Out of warranty looks like an $800+ fix!

Ragin Gti · 04-14-2017, 04:54 PM

$250 an hour?!? Holy Cali pricing. 😳

Sent from my iPhone using Tapatalk

Ethereal05 · 04-15-2017, 01:33 PM

Quote:

Originally Posted by Ragin Gti

Subaru TSB 03-77-17, dated 1/3/17, for a "rotational sound from clutch release bearing". New TOB part # 30502AA150. Covers '13-'17 BRZ. New bearing installed in cars from VIN H*600825 and up.

Sent from my iPhone using Tapatalk

Thank you! I was in the shop last week and they wanted to change my pedal assembly. I am going in with this TSB number and get this thing fixed with updated part.

Ragin Gti · 04-15-2017, 02:28 PM

There is also a TSB for a creaking noise from the pedal assembly.

Sent from my iPhone using Tapatalk

Ethereal05 · 04-15-2017, 07:49 PM

Quote:

Originally Posted by Ragin Gti

There is also a TSB for a creaking noise from the pedal assembly.

Sent from my iPhone using Tapatalk

Interesting. I am certain it is coming from the bell housing but I'll have them replace the pedal assembly first and if it continues move on to this. Thanks. Would you happen to have the TSB number for the pedal assembly creak?

Ragin Gti · 04-15-2017, 10:46 PM

Definitely two different noises. The clutch pedal will make noise without the engine running. The throw out bearing only makes noise if the engine is running. I can find the pedal assembly TSB number.

Sent from my iPhone using Tapatalk

04-14-2017, 08:06 AM	#21
Ragin Gti Member Join Date: Jan 2017 Drives: '15 Subaru BRZ Location: Pittsburgh Posts: 93 Thanks: 8 Thanked 58 Times in 35 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Clutch squeak, grind, groan TSB released. Subaru TSB 03-77-17, dated 1/3/17, for a "rotational sound from clutch release bearing". New TOB part # 30502AA150. Covers '13-'17 BRZ. New bearing installed in cars from VIN H*600825 and up. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch pedal loud squeak	Neekowahhhh	Issues \| Warranty \| Recalls / TSB	616	06-06-2022 01:47 PM
Loud 'Squeak' Noise From Clutch?	Brndn704	Issues \| Warranty \| Recalls / TSB	23	07-20-2020 08:58 AM
Upgraded Clutch Squeak	Rybot	Issues \| Warranty \| Recalls / TSB	116	10-09-2019 02:10 PM
Clutch Squeak	CatDaddysBBQ	Issues \| Warranty \| Recalls / TSB	4	07-14-2015 06:44 AM
Clutch pedal squeak.	merino_frs	Engine, Exhaust, Transmission	1	08-25-2014 01:00 AM

04-12-2017, 02:35 PM	#17
Muaddib Mentat Join Date: Jun 2013 Drives: 2013 Scion FRS 6MT Location: Vancouver Posts: 542 Thanks: 666 Thanked 358 Times in 198 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	When i was working at Toyota in 2014 i emailed Toyota many times in regards to this issue. No response from the north american head office. 3 years later they released the TSB when i am no longer with Toyota. Fuck my life.

04-12-2017, 06:53 PM	#18
number_Un0 Senior Member Join Date: Feb 2016 Drives: 2013 FRS 10 series #0001 Location: los angeles, CA Posts: 139 Thanks: 19 Thanked 29 Times in 18 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	great! right when my warranty is over.

04-14-2017, 02:39 PM	#22
PWBRZ Senior Member Join Date: Dec 2013 Drives: 2013 BRZ 6MT Location: CA Posts: 127 Thanks: 167 Thanked 59 Times in 41 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Well, no pdf (yet) but here's the summary description from the techinfo.subaru.com website: -Qte- “Rotational” Sound from Clutch Release Bearing This bulletin announces a change to the internal lubricating grease used during assembly of the clutch release bearing for BRZ models. In cases where drivers have a tendency to rest their foot on the clutch pedal, doing so can cause the bearing to overheat. As a result, the grease inside the bearing can break down and over time, cause a “whirring” or rotational-type sound to develop. The new clutch release bearing contains a grease which is more resistant to heat while maintaining proper lubrication. -Unqte-

04-14-2017, 03:52 PM	#23
exE36M3 Senior Member Join Date: Mar 2014 Drives: 2013 BRZ Location: NorCal Posts: 331 Thanks: 165 Thanked 173 Times in 93 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Yikes 3.7 hours... NorCal dealer labor rate is about $250/hour. If you guys have this issue - get into the shop NOW. Out of warranty looks like an $800+ fix!

04-14-2017, 04:54 PM	#24
Ragin Gti Member Join Date: Jan 2017 Drives: '15 Subaru BRZ Location: Pittsburgh Posts: 93 Thanks: 8 Thanked 58 Times in 35 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	$250 an hour?!? Holy Cali pricing. 😳 Sent from my iPhone using Tapatalk

04-15-2017, 02:28 PM	#26
Ragin Gti Member Join Date: Jan 2017 Drives: '15 Subaru BRZ Location: Pittsburgh Posts: 93 Thanks: 8 Thanked 58 Times in 35 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	There is also a TSB for a creaking noise from the pedal assembly. Sent from my iPhone using Tapatalk

04-15-2017, 10:46 PM	#28
Ragin Gti Member Join Date: Jan 2017 Drives: '15 Subaru BRZ Location: Pittsburgh Posts: 93 Thanks: 8 Thanked 58 Times in 35 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Definitely two different noises. The clutch pedal will make noise without the engine running. The throw out bearing only makes noise if the engine is running. I can find the pedal assembly TSB number. Sent from my iPhone using Tapatalk

User Name		Remember Me?
Password