|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
|
Thread Tools | Search this Thread |
02-06-2013, 10:38 PM | #1 |
Senior Member
Join Date: Feb 2012
Drives: Firestorm FR-S 6MT
Location: SF Bay area
Posts: 103
Thanks: 12
Thanked 91 Times in 27 Posts
Mentioned: 2 Post(s)
Tagged: 1 Thread(s)
|
Scangauge xgauge code for oil temp, seat belt beep disable, and more
Working code for FR-S/BRZ/86:
Code:
Gauge Unit TXD RXF RXD MTH Note Oil temp C 07E02101 010702E80324 3008 00010001FFD8 Required FW 4.05 or higher Oil temp F 07E02101 010702E80324 3008 00090005FFD8 Required FW 4.05 or higher Precise Fuel Level % 07C02129 046105290000 2808 000100010000 Faster refresh rate Precise Fuel Level US Gallons 07C02129 046145290000 2808 052900640000 Faster refresh rate Precise Fuel Level Liters 07C02129 046145290000 2808 01F4000A0000 Faster refresh rate Seat Belt Beep Query 07C021A7 046115A70000 2808 000100010000 C0 for stock, 00 for disable Seat Belt Beep Disable 07C03BA700 047B15A70000 2008 000100010000 Should return 0000. Replace '00' in the TXD with 'C0' to go back to stock. Relative Throttle Position % 07E00145 044185450000 2808 03E800FF0000 Absolute Throttle Position % 07E00147 044185470000 2808 03E800FF0000 Fuel Pressure PSI 07E00123 046105230000 2810 006400450000 Fuel Pressure MPa 07E00123 046145230000 2810 000100010000 Here is an example of how to make use of the doc I created: From the Xgauge cansf list, the short Term Fuel Trim Bank 1 has the TXD 07E00106. The 01 (07E00106) is the mode #. The 06 (07E00106) is the PID. Now look at the doc I attached. It shows the PID 06 is supported, which means that xgauge code works on our cars. The PID 07, On the other hand, is not highlighted on the list. That means the Short Term Fuel Trim Bank 2 is not supported. Thank you Andery for finding the PID and torque’s code for oil temperature. Without him, I don’t think I can get the oil temp for xgauge.
__________________
2013 Scion Firestorm FR-S MT
Last edited by pkny; 06-11-2013 at 09:12 PM. Reason: Updated the code |
The Following 13 Users Say Thank You to pkny For This Useful Post: | Allch Chcar (02-16-2013), andreyiv (02-07-2013), Bullnettles (08-23-2013), FingR-S (05-06-2014), HRTROB (11-28-2015), jonnyboy (02-06-2013), LeeMaster (02-07-2013), Lonewolf (02-16-2013), MannyO (03-26-2013), nzer (02-07-2013), SkullWorks (03-26-2013), theredtape (04-04-2013), WillRacer1jz (04-06-2013) |
02-06-2013, 10:49 PM | #2 |
Member
Join Date: Jun 2012
Drives: GTS 86 6AT
Location: Sydney, AUstralia
Posts: 53
Thanks: 8
Thanked 5 Times in 5 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
You are amazing!
Thanks for figuring this out! |
02-07-2013, 02:26 AM | #3 |
Member
Join Date: Jun 2012
Drives: GTS 86 6AT
Location: Sydney, AUstralia
Posts: 53
Thanks: 8
Thanked 5 Times in 5 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
Not sure if my the codes would vary by locality, but on my scangauge I had to alter one value in the MTH:
MTH 00010001FFD8 |
The Following User Says Thank You to jonnyboy For This Useful Post: | pkny (02-07-2013) |
02-07-2013, 02:45 AM | #4 |
Senior Member
Join Date: Feb 2012
Drives: Firestorm FR-S 6MT
Location: SF Bay area
Posts: 103
Thanks: 12
Thanked 91 Times in 27 Posts
Mentioned: 2 Post(s)
Tagged: 1 Thread(s)
|
Jonnyboy, thank you for catching my typo. Yeah, it should be 00010001FFD8. It has been a long day. Anyway, the 1st post was corrected.
__________________
2013 Scion Firestorm FR-S MT
Last edited by pkny; 02-07-2013 at 03:07 AM. |
02-07-2013, 05:03 AM | #5 |
Senior Member
Join Date: Nov 2012
Drives: 86 GTS
Location: brisbane
Posts: 270
Thanks: 46
Thanked 102 Times in 65 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
worked for me... a million thanks!
|
02-07-2013, 06:22 AM | #6 |
Senior Member
Join Date: Sep 2011
Drives: 86
Location: Brisbane Australia
Posts: 2,168
Thanks: 287
Thanked 374 Times in 264 Posts
Mentioned: 9 Post(s)
Tagged: 1 Thread(s)
|
Sorry for bring a noob. Can you also post the steps to setup in the scangauge?
Thanks in advance. Edit: never mind, found some instruction online and Weill try it later. Last edited by Nardi330; 02-07-2013 at 07:16 AM. |
02-07-2013, 10:34 PM | #7 |
Boosted
Join Date: Jul 2012
Drives: Sideways
Location: Atlanta Georgia USA
Posts: 2,377
Thanks: 388
Thanked 716 Times in 414 Posts
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
|
The IA is intake air temp?
What's WT, water?
__________________
Nismo 370Z 300whp -> FR-S Turbo 450whp on E85 -> Z06 Corvette 500whp
|
02-07-2013, 10:43 PM | #8 |
Senior Member
Join Date: Nov 2012
Drives: FR-S
Location: Sask., Canada
Posts: 250
Thanks: 84
Thanked 89 Times in 55 Posts
Mentioned: 20 Post(s)
Tagged: 1 Thread(s)
|
I've had my eye on the ScanGuage for quite awhile, this is great. By the way, will the Scanguage fit in the slot under the a/c controls? It looks close, maybe not for the push button start equipped cars but perhaps the ones without.
|
02-07-2013, 10:51 PM | #9 | |
Senior Member
Join Date: Sep 2012
Drives: TIE interceptor; BRZ13
Location: Miami
Posts: 309
Thanks: 131
Thanked 132 Times in 88 Posts
Mentioned: 18 Post(s)
Tagged: 3 Thread(s)
|
Quote:
Sent from my iPhone using Tapatalk
__________________
"Speed has never killed anyone. Suddenly becoming stationary, that's what gets you." Jeremy Clarkson
|
|
02-07-2013, 11:07 PM | #10 | |
Senior Member
Join Date: Nov 2012
Drives: FR-S
Location: Sask., Canada
Posts: 250
Thanks: 84
Thanked 89 Times in 55 Posts
Mentioned: 20 Post(s)
Tagged: 1 Thread(s)
|
Quote:
|
|
02-07-2013, 11:09 PM | #11 |
Senior Member
Join Date: Sep 2012
Drives: TIE interceptor; BRZ13
Location: Miami
Posts: 309
Thanks: 131
Thanked 132 Times in 88 Posts
Mentioned: 18 Post(s)
Tagged: 3 Thread(s)
|
You can set the The ScanGaugeE the same right? Since is more than an 1" shorter should fit b/w start button and usb
Sent from my iPhone using Tapatalk
__________________
"Speed has never killed anyone. Suddenly becoming stationary, that's what gets you." Jeremy Clarkson
|
02-07-2013, 11:24 PM | #12 |
Senior Member
Join Date: Nov 2012
Drives: FR-S
Location: Sask., Canada
Posts: 250
Thanks: 84
Thanked 89 Times in 55 Posts
Mentioned: 20 Post(s)
Tagged: 1 Thread(s)
|
So I couldn't find my tape measure but with a shitty ruler I found that there is plenty of width for the standard unit. However, height is an issue and you may have to remove or trim the rubber in the slot. The height of the slot without that rubber is over 1.5" though so it can work. My other concern is the display contrast - can you see the display clearly from the drivers position if it were installed there flush with the dash?
|
02-08-2013, 02:03 AM | #13 |
Senior Member
Join Date: Nov 2012
Drives: 86 GTS
Location: brisbane
Posts: 270
Thanks: 46
Thanked 102 Times in 65 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
02-08-2013, 02:07 AM | #14 |
Senior Member
Join Date: Nov 2012
Drives: 86 GTS
Location: brisbane
Posts: 270
Thanks: 46
Thanked 102 Times in 65 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
here is a pic I found on these forums somewhere
Ill have to look into the scangauge E, hopefully it will fit in the start button models. I pinched this scangage from my other car anyway.. |
The Following User Says Thank You to 86•BRZ For This Useful Post: | Sportsguy83 (02-08-2013) |
|
|
Thread Tools | Search this Thread |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FT-86 low temp THERMOSTAT | ft86-UAE | Engine, Exhaust, Transmission | 52 | 08-30-2016 03:46 PM |
A/C Oil/Water temp gauge | Exhaust | Scion FR-S / Toyota 86 GT86 General Forum | 16 | 02-07-2013 01:19 PM |
Engine oil temp now available in Torque App | Yruyur | Engine, Exhaust, Transmission | 8 | 02-03-2013 10:52 PM |
exterior temp. gauge off? | Rayme | CANADA | 8 | 01-23-2013 09:06 PM |
Simple Oil Temp. Gauge | Sportsguy83 | Cosmetic Modification (Interior/Exterior/Lighting) | 4 | 01-19-2013 08:25 PM |