2017 BRZ Performance Package DD Build

[Psilox]

Originally Posted by mjanmohammad

This is the only one I've taken so far, about 45 minutes after the coat was applied. It was done by a mobile detailer in my driveway and I got home just before sunset. I'll get some more in direct sunlight tomorrow!

Gorgeous! The shine is so brilliant!

Sent from my E6653 using Tapatalk

[mjanmohammad]

Scraped the front lip as I was pulling into my driveway tonight. Proceeded to apologize to my car. Thats normal right?

[Berzerk]

Originally Posted by mjanmohammad

Scraped the front lip as I was pulling into my driveway tonight. Proceeded to apologize to my car. Thats normal right?

Absolutely normal.

[mjanmohammad]

Took her to her first Cars and Coffee!

Met a guy that used to own a BRZ that still has his OFT he's gonna sell me for dirt cheap. Looks like I'll eventually be getting headers too after hearing the rumble coming from some of the other 86 guys. Anyone have recommendations for UEL headers?

[Barefootdan]

Originally Posted by mjanmohammad

Took her to her first Cars and Coffee!

Met a guy that used to own a BRZ that still has his OFT he's gonna sell me for dirt cheap. Looks like I'll eventually be getting headers too after hearing the rumble coming from some of the other 86 guys. Anyone have recommendations for UEL headers?

I was looking at the Gruppe-S header since it seems to be a good design and relatively cheap. But CSG_Mike has me contemplating the ACE header

[mjanmohammad]

Washed and waxed!

then I took her out for a photo shoot. Its amazing how much better she looks through a DSLR lens instead of my phone

[Guff]

If you haven't figured out the Perrin issue yet, it's likely the mid-pipe that comes directly after the muffler. Because it is v-band on both sides, it can actually be twisted a few degrees in either direction. This will change the angle that the muffler sits, thus changing your tip locations.

[mjanmohammad]

Originally Posted by Psilox

Speaking of smoked, I'd love a set, but I've heard the Helix ones have pretty bad water issues. Know of any that don't have this issue, or a way to reliably prevent any leakage/fogging?

To OP, lovely car, you're making the wait for mine much harder! Can't wait to see how some of these mods turn out!

There was some light rain in my area and the side markers held up fine.

There was also a sprinkler head that decided the lawn had enough water and started spraying my car instead, the side markers have zero moisture in them, even after 15 minutes of direct water spray onto that area of the car.

The opticoat made wiping it down so easy, i love it.

[Subie_Nubie]

I know exactly who's car this is based on the pics. We talked when I pulled up to the monthly DFW meet ha. Welcome.

[mjanmohammad]

Got my SMU alum plate! Pony Up!

[Guff]

Oooh snap, I didn't even realize, you're Z-Riz's buddy! Z-Riz the Wiz is my right hand man!

We shall have a meetup when I'm back in Dallas! Any friend of Z-Riz's is a friend of mine!

[mjanmohammad]

Originally Posted by Guff

Oooh snap, I didn't even realize, you're Z-Riz's buddy! Z-Riz the Wiz is my right hand man!

We shall have a meetup when I'm back in Dallas! Any friend of Z-Riz's is a friend of mine!

AYYYYYYYYY he's basically my role model haha, at least 20% of the reason I got a BRZ after driving his when he got it. He drove mine and loved it.


More updates on the car, replaced the dome, trunk, and license plate lights with LEDs, will eventually do the door puddle lights and reverse lights

[ModBargains.com]

OFT and suspension will be two great mods for the car that will really make a big difference. One of our most popular item for the FRS is the OFT, flies off the shelf!

[Ry.ruzn]

Originally Posted by mjanmohammad

Theyre installed!
For some reason the tips on the exhaust don't line up properly. The left tip is sticking out about an inch more than the right. Gonna play with it later and see what I can do to fix it

Seems like that's a recurring theme for some people. Same issue and I have a Injen SES catback.