Wheel Directory: Enkei Raijin 18x9.5 +45 - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

swarb · 01-11-2016, 03:33 PM

Quote:

Originally Posted by x18999

Any spacers would make the wheel poke out of the fender which would cause rubbing on the fender and look terrible.

Not entirely true.
I'm on 9.5 +34, lowered, don't rub, and it looks fine.
It does poke, but not that much, and I have 2.9 camber so it looks fine.
Please don't give misinformation. 8-10mm spacers on +45 would make it +35/+37ish which MOST people running 9.5 widths are running. So yeah they fit with minor poke depending on camber.

With that said, you probably need coil overs if you want to run 9.5 widths and want little to no poke.

x18999 · 01-11-2016, 03:46 PM

Quote:

Originally Posted by swarb

Not entirely true.
I'm on 9.5 +34, lowered, don't rub, and it looks fine.
It does poke, but not that much, and I have 2.9 camber so it looks fine.
Please don't give misinformation. 8-10mm spacers on +45 would make it +35/+37ish which MOST people running 9.5 widths are running. So yeah they fit with minor poke depending on camber.

With that said, you probably need coil overs if you want to run 9.5 widths and want little to no poke.

The information I provided is NOT misinformation for this specific wheel on the vehicle.

The fact is that the wheels will poke out of the fenders. Whether it looks acceptable is subjective...

Unless if you keep the ride height very high, the spring/strut travel up/down over bumps will cause the tire to hit the fender.

Most people wouldn't want to run -2.9 camber on a street car...

SHIFTEVO · 01-11-2016, 07:16 PM

Quote:

Originally Posted by PEWPEW

Lol nice

cocaine_coupe · 01-25-2016, 05:02 PM

Quote:

Originally Posted by x18999

Enkei Raijin 18x9.5 +45 with 255/35/18 Bridgestone Potenza S04 tires lowered on ST coilovers.

Any camber adjustments?

x18999 · 02-20-2016, 04:58 PM

Quote:

Originally Posted by cocaine_coupe

Any camber adjustments?

Just the slotted hole on the strut tower. I don't have any camber plates.

bink · 04-02-2016, 11:49 AM

Quote:

Originally Posted by x18999

Enkei Raijin 18x9.5 +45 with 255/35/18 Bridgestone Potenza S04 tires lowered on ST coilovers.

What color are the wheels? Gunmetal or hyper silver? Great looking car!

x18999 · 04-04-2016, 09:40 AM

Quote:

Originally Posted by bink

What color are the wheels? Gunmetal or hyper silver? Great looking car!

The color is hyper silver with a light coating of brake dust.

bink · 04-04-2016, 07:48 PM

Quote:

Originally Posted by x18999

The color is hyper silver with a light coating of brake dust.

Thanks. How do you like the ST coilovers? Would you recommend them?

Drue · 04-09-2016, 09:55 PM

18x9.5 all around, 255/35 Nitto Invo's, Fortunte auto coilovers, spl lca's.

switchlanez · 10-02-2016, 12:43 AM

@x18999 @DCStorm @loogs @Scaldy @Drue

For the guys who haven't adjusted caster (no front LCAs nor top hats), do you experience faint rubbing when you turn full lock (and worse when full lock on uneven ground)?

I'm on ST coilovers, -2.0 front camber with 18x9.5 +45 wheels and found signs of slight rubbing in my front wheel wells.

Greenbean · 02-15-2018, 11:59 AM

Does anyone know if the raijin 18x9.5+45 will fit over the bbk's in the front and rear. I would want to get these wheels if they fit.

deku · 04-01-2019, 09:51 PM

anyone know if 18x9.5 +45 w/ 255/35 tires staggered with 18x8.5 +45 w/ 235/40 tires would fit the pp brembos? im looking to buy a set of wheels w/tires and want to find out before i drive out of state to pick up.

10-02-2016, 12:43 AM	#38
switchlanez Glorious BRZ Master Race Join Date: Apr 2011 Drives: Subaru Libird Location: Race Wars Posts: 3,645 Thanks: 1,050 Thanked 2,718 Times in 1,079 Posts Mentioned: 110 Post(s) Tagged: 0 Thread(s)	@x18999 @DCStorm @loogs @Scaldy @Drue For the guys who haven't adjusted caster (no front LCAs nor top hats), do you experience faint rubbing when you turn full lock (and worse when full lock on uneven ground)? I'm on ST coilovers, -2.0 front camber with 18x9.5 +45 wheels and found signs of slight rubbing in my front wheel wells. __________________ << BUILD THREAD >>

02-15-2018, 11:59 AM	#39
Greenbean Member Join Date: Feb 2018 Drives: 2017 series yellow BRZ Location: Newport News Virginia Posts: 87 Thanks: 9 Thanked 20 Times in 17 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	BBK fitment Does anyone know if the raijin 18x9.5+45 will fit over the bbk's in the front and rear. I would want to get these wheels if they fit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: Enkei NT-03M 18x9.5 +40	Touge Factory	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	140	12-08-2021 12:15 AM
Wheel Directory: Enkei Raijin 18x8.5 +45 / 18x9.5 +45	GuerillaRacing	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	221	08-01-2019 10:30 AM
Wheel Directory: Enkei Raijin 18x8.0 +45	DarrenDriven	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	66	03-30-2018 11:37 AM
Wheel Directory: Enkei Raijin 18x8.5 +45	SWPBRZ415	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	62	11-28-2016 03:51 PM
Wheel Directory: Enkei Raijin 18x8.0 +40 / 18x9.5 +45	seanmc69	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	19	07-08-2013 12:38 PM

04-09-2016, 09:55 PM	#37
Drue Junior Member Join Date: Jun 2015 Drives: 2013 BRZ Limited Location: Parker, CO Posts: 3 Thanks: 0 Thanked 2 Times in 2 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	18x9.5 all around, 255/35 Nitto Invo's, Fortunte auto coilovers, spl lca's.

User Name		Remember Me?
Password