WedsSport TC105X 17x9 +35 and TRD Springs - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

timurrrr · 07-05-2019, 04:14 AM

Any tips on what kind of lug nuts to get for these? (both spec-wise and color-wise)

Are there enough turns available on the stock studs? I don't know whether the depth of the hub part of wheels is a standard thing or varies model to model.

Also, is there enough space around the lugs for a thick deep socket, or does one need to use a thin/special socket?

MotoX16 · 07-08-2019, 05:03 PM

Quote:

Originally Posted by timurrrr

Any tips on what kind of lug nuts to get for these? (both spec-wise and color-wise)

Are there enough turns available on the stock studs? I don't know whether the depth of the hub part of wheels is a standard thing or varies model to model.

Also, is there enough space around the lugs for a thick deep socket, or does one need to use a thin/special socket?

These are the lug nuts I got, but any M12x1.25 conical lug nuts will work.
https://www.counterspacegarage.com/w...en-end-m12x125

They work just fine on the stock studs and I use a standard 17mm deep socket for them.

SuperTom · 01-03-2020, 07:38 PM

OP good looking on the 86. Maybe my big spring purchase

GrabTheWheel · 01-03-2020, 10:59 PM

Quote:

Originally Posted by Vten

Very nice ! I had the tc105n same specs with 255/40 rs4 before, loved it but had to let them go because I did the 6/4 ap racing bbk upgrade. Wished they comes with 18x9.5 et35-40...

They do make the TC105X in a 18x9.5 5x100. I think it's new. Offset is +45 though.

https://nebula.wsimg.com/47daeeb2e80...&alloworigin=1

Vten · 01-07-2020, 09:49 AM

Quote:

Originally Posted by GrabTheWheel

They do make the TC105X in a 18x9.5 5x100. I think it's new. Offset is +45 though.

https://nebula.wsimg.com/47daeeb2e80...&alloworigin=1

Yeah, But I went with the te37 saga already

smg1138 · 01-07-2020, 10:00 PM

Quote:

Originally Posted by GrabTheWheel

They do make the TC105X in a 18x9.5 5x100. I think it's new. Offset is +45 though.

https://nebula.wsimg.com/47daeeb2e80...&alloworigin=1

Would that fit even with coilovers? Seems like it would rub somewhere.

StraightOuttaCanadaEh · 01-08-2020, 08:36 AM

Quote:

Originally Posted by smg1138

Would that fit even with coilovers? Seems like it would rub somewhere.

My enkei raijins are 18x9.5 with the same offset, no rubbing anywhere

smg1138 · 01-09-2020, 10:05 PM

Quote:

Originally Posted by StraightOuttaCanadaEh

My enkei raijins are 18x9.5 with the same offset, no rubbing anywhere

How much front camber are you running?

StraightOuttaCanadaEh · 01-10-2020, 08:46 AM

Quote:

Originally Posted by smg1138

How much front camber are you running?

-2. something

01-03-2020, 07:38 PM	#17
SuperTom Senior Member Join Date: Feb 2014 Drives: C5 Corvette, '17 Toyota 86, Jeep XJ Location: New Castle DE Posts: 1,500 Thanks: 1,436 Thanked 914 Times in 528 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	OP good looking on the 86. Maybe my big spring purchase __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WEDS TC105x 17x9.0+35 2018 EXCLUSIVE Gunmetal color, Japan made, rare & lightweight	Gruppe-s	Wheels and Tires	52	07-29-2020 12:55 AM
New Season - New Wheels Enkei TS5, WedsSport TC105X, RAYS G025	eMCee	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	37	05-28-2020 07:41 PM
Wedssport SA-72r 17x9.5 +38	PuslarBrrrz	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	3	12-19-2018 12:49 AM
17x9 +35 WedsSport TC105N	odessitik	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	3	11-03-2014 02:22 PM
WedsSport TC105n 17x9 +35	howiedoit	Wheels and Tires	14	09-15-2014 12:12 PM

07-05-2019, 04:14 AM	#15
timurrrr Senior Member Join Date: May 2019 Drives: 2022 GR86 Location: Between Sonoma and Laguna Seca Posts: 1,707 Thanks: 2,130 Thanked 1,297 Times in 718 Posts Mentioned: 30 Post(s) Tagged: 1 Thread(s)	Any tips on what kind of lug nuts to get for these? (both spec-wise and color-wise) Are there enough turns available on the stock studs? I don't know whether the depth of the hub part of wheels is a standard thing or varies model to model. Also, is there enough space around the lugs for a thick deep socket, or does one need to use a thin/special socket?

User Name		Remember Me?
Password