Wheels on a budget. POST THEM HERE!!!

[Vracer111]

Originally Posted by TheMuffinMan

Those wheels are NICE, but is our bolt pattern really that unpopular?

Not much information on the wheels but they are 15" only which is almost exclusively 4x100 for the Honda/Miatas from what I can gather... I'd love that wheel in 17", 1" longer spokes would look really nice... 5x100 not an unpopular bolt pattern, plenty of wheels with the pattern.

[TheMuffinMan]

Originally Posted by Vracer111

Not much information on the wheels but they are 15" only which is almost exclusively 4x100 for the Honda/Miatas from what I can gather... I'd love that wheel in 17", 1" longer spokes would look really nice... 5x100 not an unpopular bolt pattern, plenty of wheels with the pattern.

Thanks man, it makes sense now. I just read something about it being unpopular for some companies on a different thread.

[Nolan.alex831]

Originally Posted by TheMuffinMan

Thanks man, it makes sense now. I just read something about it being unpopular for some companies on a different thread.

From the research I've done, there's a few companies that only provide the 5x100 on certain wheels. However, there are a bunch of companies, XXR just for example, that are doing wheels with both 5x100 and 5x114.3. All in all if you can't find a 5x100 with one companies, there's another that makes a similar wheel that does have a 5x100 option


Sent from my iPad using Tapatalk

[OjiGeorge]

Originally Posted by psyclone07

Bremmer kraft br10
18x9 42mm offset
700 picked up from tire rack
Not my car Attachment 65673

Did a bit of digging into these wheels, as they are sexy as hell. For better or worse, the styling rip-off is blatant :/

On other forums, tirerack really seems to be vocally backing the quality of Bremmer Kraft. Now, I know you will say that Tire Rack is their main supplier, and so they would say this. Keep in mind, Tirerack does a lot of business, and is really putting their credibility on the line to make such a statement.

It's also noteworthy that, both Bremmer Kraft and ASA are licensed by BBS, which says something- these wheels are not completely out of no-where Chinese brand with no history. There sould be some half-decent quality standards being put in place for BBS to affiliate with them.

Think these would be a great, inexpensive, street setup. For track I'd go with some better known 17's, such as Mach V Awesome, and ultra sticky rubber

[vividracing]

We totally forgot about clutch wheels


Klutch SL5




Klutch SL14

[vividracing]

Thought these look good too and it is possible to get a set under $1000

Dai Yoshihara wheels

Champion


D-12C


D5C


DY-37C


DY-77C

[fa5tco]

@vividracing how much for the black SL14 18x9.5r and 18.8.5f local pick up with cold hard cashhhhh

[OjiGeorge]

Installed the Bremmer Kraft BR10's. They look incredible in person.. very impressed with the finish.

The bad: shop that installed them let me know that they balanced like crap... not sure what this implies for high speed safety, but it's noteworthy.

[krulux]

I find my tastes are satisfied buying medium grade products. Not too cheap and not too expensive. These products are usually the best bang for the buck.. and seeing as how I got out of the credit-card debt prison over 5yrs ago - I pay cash for all my purchases.

For a set of wheels.. $1,000 is my perfect budget. I can't see paying more than that for ANY set. I like the looks of some of the high dollar baller wheels, but I can't see myself spending that kind of cash on them.

Same goes for tires... a full set, mounted, balanced and aligned should be less than $1,000. Any savings less than that is cash to be spent on other upgrades

I've already got another thread going on the 18x8 Enkei Fujin's I recently purchased. They were on sale for less than $650 shipped. That is a good deal for a decent wheel.

[OjiGeorge]

Pic of the Bremmer's on my FRS. I think ASA got the offset and wheel width perfect on these. The finish of the wheels looks top quality in person. 255/35 V12 square.

[zimzum]

Originally Posted by dem00n

Bleh, could be here all day.
Problem with cheaper wheels is the paint, don't get me started with XXR's.

Fifteen52

Sparco!

im having trouble finding these online. anyone know of some places where i can find them at a good price...

[dem00n]

Originally Posted by zimzum

im having trouble finding these online. anyone know of some places where i can find them at a good price...

Don't they sell them directly to you?

[Jay2420]

Looks like Advanti Racing released 18x8 +45 wheel option weighing in at 19lbs (Tire Rack)

$200 a wheel
Advanti Drago

[vividracing]

We have now partnered up with them. Send me a PM.

Jacky

Originally Posted by zimzum

im having trouble finding these online. anyone know of some places where i can find them at a good price...