Khorne's - AUDM Red 86 GTS Sprintex - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

ModBargains · 06-11-2014, 11:18 AM

Race car

Loving it man

Khorne · 06-13-2014, 11:31 PM

Did my engine oil change, discovered the new jack i bought doesn't go high enough to get the stands under the pinch weld correctly. So no diff or trans change for a week or so.

Wanted to remove the faded tyre white pain from my tyres, scratching them was too slow, sandpaper didn't work, a tiny bit of acetone did not work and a high pressure hose did not work. So i went and bought some black paint pens and just marked over them XD.

Posting some pics of the tyre white when it looked nice.

Khorne · 06-13-2014, 11:37 PM

Excuse the potato photos in this post.

Used @wdninja DIY to fix my crystal eyes working great so far it's been out in 5 degree celcuis weather with no condensation at all.

Then went all ricer and put brand stickers on my car, hey i took the carbon bonnet off, i can have some rice

Khorne · 06-30-2014, 08:58 PM

So after a little dry spell deliveries are flowing again.
Motive power bleeder + 0107 attachment, Beef Jerky.
And my AP racing brakes after a 6 week wait are only 1 day away now.

Khorne · 07-02-2014, 03:13 AM

AWWWWWW YEH

Khorne · 07-10-2014, 04:36 AM

Brakes done, fluid flush as well. Used Nulon Extreme Dot4 184 degree celcuis wet boiling point.

Khorne · 07-28-2014, 07:57 AM

Now i wait for my Block8head dual pod and i can install these bad boys.
Thanks to @Evasive Motorsports again for some awesome stuff.

Evasive Motorsports · 08-01-2014, 08:16 PM

Quote:

Originally Posted by Khorne

Now i wait for my Block8head dual pod and i can install these bad boys.
Thanks to @Evasive Motorsports again for some awesome stuff.

Can't wait to see them in!

Khorne · 08-14-2014, 11:46 PM

Got my dual pod from Block8Head

Well worth the price, just about to head out to get a fitting to tap the boost gauge into the MAP plate of the sprintex and then i can install. Though that might be in a few weeks since i cannot into electricity.

On a plus AutoX and track this Sunday, first time since new wheels, tyres, brakes and suspension looking forward too it. Plan to make the most of the instructors there to improve along with my gopro so i can watch my control inputs afterwards.

Khorne · 08-14-2014, 11:50 PM

Also helping a friend out and holding onto their LED swapped HVAC and trac control buttons will be back to red soon. Only downside is that she likes pink, a lot.

Khorne · 08-19-2014, 11:00 AM

Had a good time at the track on the weekend. Previous best time was 1:18 on the RAC track, got 1:12 this time. The car felt a lot better than last time with a good tyre, coilover setup. And i can see my driving skill has improved a bit, Still a long way to go.
Enjoy some pics and vids.

[ame="https://www.youtube.com/watch?v=ykc1NIZNrQ0"]More track - YouTube[/ame]

Also ran out of talent at the end of the straight after getting a bit excited when a friend was behind me. Totally my fault and lesson well learned about concentration on the track. Damage small paint chip and one of the metal clips that holds in the side marker.

And i managed to get it on my Gopro
[ame="https://www.youtube.com/watch?v=P_E434nQ3To"]Toyota 86 Spin out - YouTube[/ame]

Khorne · 08-31-2014, 09:44 AM

Fitted Gauges

[ame="https://www.youtube.com/watch?v=xr0teRqYaxU"]86 Tanabe gauge startup - YouTube[/ame]

06-13-2014, 11:31 PM	#44
Khorne Super 86 Join Date: May 2013 Drives: Red 86 GTS Location: Aus/Perth Posts: 361 Thanks: 124 Thanked 252 Times in 128 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Did my engine oil change, discovered the new jack i bought doesn't go high enough to get the stands under the pinch weld correctly. So no diff or trans change for a week or so. Wanted to remove the faded tyre white pain from my tyres, scratching them was too slow, sandpaper didn't work, a tiny bit of acetone did not work and a high pressure hose did not work. So i went and bought some black paint pens and just marked over them XD. Posting some pics of the tyre white when it looked nice. __________________ 230rwhp/184ftlb on 98RON/93AKI Build thread Red 86 GTS MT \| Sprintex Intercooled Twin Screw SC \| Invidia N1 \| Mocal 10 row \| Invidia Front Pipe \| Motiv Overpipe\| Enkei RPF01 with Bridgestone RE002s \| MCA Blue Coilovers \| Radium Catch Can

06-13-2014, 11:37 PM	#45
Khorne Super 86 Join Date: May 2013 Drives: Red 86 GTS Location: Aus/Perth Posts: 361 Thanks: 124 Thanked 252 Times in 128 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Excuse the potato photos in this post. Used @wdninja DIY to fix my crystal eyes working great so far it's been out in 5 degree celcuis weather with no condensation at all. Then went all ricer and put brand stickers on my car, hey i took the carbon bonnet off, i can have some rice __________________ 230rwhp/184ftlb on 98RON/93AKI Build thread Red 86 GTS MT \| Sprintex Intercooled Twin Screw SC \| Invidia N1 \| Mocal 10 row \| Invidia Front Pipe \| Motiv Overpipe\| Enkei RPF01 with Bridgestone RE002s \| MCA Blue Coilovers \| Radium Catch Can

06-30-2014, 08:58 PM	#46
Khorne Super 86 Join Date: May 2013 Drives: Red 86 GTS Location: Aus/Perth Posts: 361 Thanks: 124 Thanked 252 Times in 128 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	So after a little dry spell deliveries are flowing again. Motive power bleeder + 0107 attachment, Beef Jerky. And my AP racing brakes after a 6 week wait are only 1 day away now. __________________ 230rwhp/184ftlb on 98RON/93AKI Build thread Red 86 GTS MT \| Sprintex Intercooled Twin Screw SC \| Invidia N1 \| Mocal 10 row \| Invidia Front Pipe \| Motiv Overpipe\| Enkei RPF01 with Bridgestone RE002s \| MCA Blue Coilovers \| Radium Catch Can

07-02-2014, 03:13 AM	#47
Khorne Super 86 Join Date: May 2013 Drives: Red 86 GTS Location: Aus/Perth Posts: 361 Thanks: 124 Thanked 252 Times in 128 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	AWWWWWW YEH __________________ 230rwhp/184ftlb on 98RON/93AKI Build thread Red 86 GTS MT \| Sprintex Intercooled Twin Screw SC \| Invidia N1 \| Mocal 10 row \| Invidia Front Pipe \| Motiv Overpipe\| Enkei RPF01 with Bridgestone RE002s \| MCA Blue Coilovers \| Radium Catch Can

07-10-2014, 04:36 AM	#48
Khorne Super 86 Join Date: May 2013 Drives: Red 86 GTS Location: Aus/Perth Posts: 361 Thanks: 124 Thanked 252 Times in 128 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Brakes done, fluid flush as well. Used Nulon Extreme Dot4 184 degree celcuis wet boiling point. __________________ 230rwhp/184ftlb on 98RON/93AKI Build thread Red 86 GTS MT \| Sprintex Intercooled Twin Screw SC \| Invidia N1 \| Mocal 10 row \| Invidia Front Pipe \| Motiv Overpipe\| Enkei RPF01 with Bridgestone RE002s \| MCA Blue Coilovers \| Radium Catch Can

06-11-2014, 11:18 AM	#43
ModBargains Join Date: Sep 2012 Drives: FRS, M3 Location: La Habra, CA Posts: 296 Thanks: 48 Thanked 135 Times in 103 Posts Mentioned: 24 Post(s) Tagged: 1 Thread(s)	Race car Loving it man

07-28-2014, 07:57 AM	#49
Khorne Super 86 Join Date: May 2013 Drives: Red 86 GTS Location: Aus/Perth Posts: 361 Thanks: 124 Thanked 252 Times in 128 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Now i wait for my Block8head dual pod and i can install these bad boys. Thanks to @Evasive Motorsports again for some awesome stuff. __________________ 230rwhp/184ftlb on 98RON/93AKI Build thread Red 86 GTS MT \| Sprintex Intercooled Twin Screw SC \| Invidia N1 \| Mocal 10 row \| Invidia Front Pipe \| Motiv Overpipe\| Enkei RPF01 with Bridgestone RE002s \| MCA Blue Coilovers \| Radium Catch Can

08-14-2014, 11:46 PM	#51
Khorne Super 86 Join Date: May 2013 Drives: Red 86 GTS Location: Aus/Perth Posts: 361 Thanks: 124 Thanked 252 Times in 128 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Got my dual pod from Block8Head Well worth the price, just about to head out to get a fitting to tap the boost gauge into the MAP plate of the sprintex and then i can install. Though that might be in a few weeks since i cannot into electricity. On a plus AutoX and track this Sunday, first time since new wheels, tyres, brakes and suspension looking forward too it. Plan to make the most of the instructors there to improve along with my gopro so i can watch my control inputs afterwards. __________________ 230rwhp/184ftlb on 98RON/93AKI Build thread Red 86 GTS MT \| Sprintex Intercooled Twin Screw SC \| Invidia N1 \| Mocal 10 row \| Invidia Front Pipe \| Motiv Overpipe\| Enkei RPF01 with Bridgestone RE002s \| MCA Blue Coilovers \| Radium Catch Can

08-14-2014, 11:50 PM	#52
Khorne Super 86 Join Date: May 2013 Drives: Red 86 GTS Location: Aus/Perth Posts: 361 Thanks: 124 Thanked 252 Times in 128 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Also helping a friend out and holding onto their LED swapped HVAC and trac control buttons will be back to red soon. Only downside is that she likes pink, a lot. __________________ 230rwhp/184ftlb on 98RON/93AKI Build thread Red 86 GTS MT \| Sprintex Intercooled Twin Screw SC \| Invidia N1 \| Mocal 10 row \| Invidia Front Pipe \| Motiv Overpipe\| Enkei RPF01 with Bridgestone RE002s \| MCA Blue Coilovers \| Radium Catch Can

08-19-2014, 11:00 AM	#53
Khorne Super 86 Join Date: May 2013 Drives: Red 86 GTS Location: Aus/Perth Posts: 361 Thanks: 124 Thanked 252 Times in 128 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Had a good time at the track on the weekend. Previous best time was 1:18 on the RAC track, got 1:12 this time. The car felt a lot better than last time with a good tyre, coilover setup. And i can see my driving skill has improved a bit, Still a long way to go. Enjoy some pics and vids. [ame="https://www.youtube.com/watch?v=ykc1NIZNrQ0"]More track - YouTube[/ame] Also ran out of talent at the end of the straight after getting a bit excited when a friend was behind me. Totally my fault and lesson well learned about concentration on the track. Damage small paint chip and one of the metal clips that holds in the side marker. And i managed to get it on my Gopro [ame="https://www.youtube.com/watch?v=P_E434nQ3To"]Toyota 86 Spin out - YouTube[/ame] __________________ 230rwhp/184ftlb on 98RON/93AKI Build thread Red 86 GTS MT \| Sprintex Intercooled Twin Screw SC \| Invidia N1 \| Mocal 10 row \| Invidia Front Pipe \| Motiv Overpipe\| Enkei RPF01 with Bridgestone RE002s \| MCA Blue Coilovers \| Radium Catch Can

08-31-2014, 09:44 AM	#54
Khorne Super 86 Join Date: May 2013 Drives: Red 86 GTS Location: Aus/Perth Posts: 361 Thanks: 124 Thanked 252 Times in 128 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Fitted Gauges [ame="https://www.youtube.com/watch?v=xr0teRqYaxU"]86 Tanabe gauge startup - YouTube[/ame] __________________ 230rwhp/184ftlb on 98RON/93AKI Build thread Red 86 GTS MT \| Sprintex Intercooled Twin Screw SC \| Invidia N1 \| Mocal 10 row \| Invidia Front Pipe \| Motiv Overpipe\| Enkei RPF01 with Bridgestone RE002s \| MCA Blue Coilovers \| Radium Catch Can

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: Advan RC II 17x7.5 +43	Hippophobia	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	10	03-13-2017 04:08 PM
Blood mountain/ Helen	FR-ser	Southeast	2	10-08-2012 08:20 AM
Blood Toyota Sale	blood86	AUSTRALIA	7	07-06-2012 06:04 AM

User Name		Remember Me?
Password