OpenFlash Tablet v1.42b maps now available - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Shiv@Openflash · 12-14-2013, 08:34 PM

Hi guys,
Had to few hours free this morning to add more non-USDM ROM support and to tweak the E85 maps. So this update only applies to a few customers overseas and all those running the E85 maps.

v1.42 Changes:
-Added tuned file and developmental XDF (TunerPro) support for ZA1JA01I and ZA1JA010 ROMs (EH 6AT and EU 6AT).
-Removed Beta status for all Stage 2 UEL E85 ROMs.
-Revised Cranking Fuel Injector Pulse Width tables for all E85 ROMs to improved cold weather cold start performance (thanks @mad_sb for suggestion)

Available for download HERE

Have a great weekend!

Cheers,
Shiv

Sojhinn · 12-14-2013, 09:43 PM

Quote:

Originally Posted by shiv@vishnu

Hi guys,
Had to few hours free this morning to add more non-USDM ROM support and to tweak the E85 maps. So this update only applies to a few customers overseas and all those running the E85 maps.

v1.42 Changes:
-Added tuned file and developmental XDF (TunerPro) support for ZA1JA01I and ZA1JA010 ROMs (EH 6AT and EU 6AT).
-Removed Beta status for all Stage 2 UEL E85 ROMs.
-Revised Cranking Fuel Injector Pulse Width tables for all E85 ROMs to improved cold weather cold start performance (thanks @mad_sb for suggestion)

Available for download HERE

Have a great weekend!

Cheers,
Shiv

Hey shiv any chance I can those revised tables on my tune?

Shiv@Openflash · 12-14-2013, 09:47 PM

Quote:

Originally Posted by Sojhinn

Hey shiv any chance I can those revised tables on my tune?

Done. You have mail

Sojhinn · 12-14-2013, 09:49 PM

Just saw. Thanks man! I will be doing some third gear pulls tomorrow morning and then I'll flash the new tune.

Malt · 12-14-2013, 10:28 PM

Intresting, I had a suspicion that zeroing out the IPW compensation tables and only adjusting the IPW tables might not be the best way to go. I'll flash this right now and give it a try in the morning.

If the IPW adjustments you made Shiv were not sufficient how much would you suggest increasing them by?

Kinaa · 12-15-2013, 06:05 AM

Quote:

Originally Posted by shiv@vishnu

Hi guys,
Had to few hours free this morning to add more non-USDM ROM support and to tweak the E85 maps. So this update only applies to a few customers overseas and all those running the E85 maps.

v1.42 Changes:
-Added tuned file and developmental XDF (TunerPro) support for ZA1JA01I and ZA1JA010 ROMs (EH 6AT and EU 6AT).
-Removed Beta status for all Stage 2 UEL E85 ROMs.
-Revised Cranking Fuel Injector Pulse Width tables for all E85 ROMs to improved cold weather cold start performance (thanks @mad_sb for suggestion)

Available for download HERE

Have a great weekend!

Cheers,
Shiv

Great Job Shiv
I confirm as well that the New ZA1JA010 Rom is working fine I tried both stage 1 and 2 , i will be posting some Data logging later on
Cheers

s2d4 · 12-15-2013, 06:16 AM

Quote:

Originally Posted by Kinaa

Great Job Shiv
I confirm as well that the New ZA1JA010 Rom is working fine I tried both stage 1 and 2 , i will be posting some Data logging later on
Cheers

Did you get IAM or KCL working?

Kinaa · 12-15-2013, 06:18 AM

Quote:

Originally Posted by s2d4

Did you get IAM or KCL working?

not sure , but I will post some logs later on

Kinaa · 12-15-2013, 06:38 AM

Quote:

Originally Posted by s2d4

Did you get IAM or KCL working?

one more thing , i can see you have a S/C on your car , as Shiv mentioned before the maps are not dedicated to any type on FI , I tried them out and it did work fine with My S/C , so if you are going to do the same , this will be on your own risk
it might worked for because i didn't have any tune for my ECU and the HKS S/C comes with piggyback F-con computer , but in my case its easy just disconnect the F con and run with the OFT tune.
this might be different for you if your using a different S/C
Cheers

s2d4 · 12-15-2013, 06:58 AM

Quote:

Originally Posted by Kinaa

one more thing , i can see you have a S/C on your car , as Shiv mentioned before the maps are not dedicated to any type on FI , I tried them out and it did work fine with My S/C , so if you are going to do the same , this will be on your own risk
it might worked for because i didn't have any tune for my ECU and the HKS S/C comes with piggyback F-con computer , but in my case its easy just disconnect the F con and run with the OFT tune.
this might be different for you if your using a different S/C
Cheers

Don't know what you are on about, I do not have an SC on my 86, it's bone stock.
Also, not sure what you meant by working when you haven't logged it yet.

Malt · 12-15-2013, 07:16 AM

Unfortunately no noticeable improvements on cranking with these maps verses the tweaks I had applied. If anything it got slightly worse as it took 7 attempts to crank this morning. I'll log the crank tomorrow morning and post up logs. Maybe it could be just a matter of further tweaking the ipw tables for just me.

Kinaa · 12-15-2013, 07:22 AM

Quote:

Originally Posted by s2d4

Don't know what you are on about, I do not have an SC on my 86, it's bone stock.
Also, not sure what you meant by working when you haven't logged it yet.

Sorry my bad , and if you have a stock 86 you can upload the map to you car and try it your self , in my case I was talking about a specific rom that Shiv added yesterday , which i'm sure no one on the forum tested it before

s2d4 · 12-15-2013, 07:50 AM

Quote:

Originally Posted by Kinaa

Sorry my bad , and if you have a stock 86 you can upload the map to you car and try it your self , in my case I was talking about a specific rom that Shiv added yesterday , which i'm sure no one on the forum tested it before

All good man, checking out a rom with the xdf released yesterday, mine didn't seem to work for those 2 parameters for logging hence my original question.

s2d4 · 12-15-2013, 08:29 AM

I may as well ask the questions here for the ZA1JA01I XDF, apologies if this is noobish but I don't now why the following is the way it is. @shiv@vishnu, hope you can shed some light for the beginners.

1. Throttle delta Fuel comp A and B has weird numbers as Y axis.
2. All of the GDI firing angle maps only has one 1 row with 7200 in Y axis, everything else is -0.
3.Close loop AFR A and B has weird numbers as Y axis.
4. Ignition base - has weird numbers as Y axis, it also ends at 7400. Doesn't this need to go to 7600 due to the increase rev limit?
5. Ignition Comp cylinder 1 and 2 - more giberish on Y axis.
6. Fuel Map - ends at 7400 but rev limit at 7600?

7. Ignition advance - ends at 7400 but rev limit at 7600?
8.Idle Targets - more giberish on Y axis although I know this is working as my car idles at around 750 now.
9. ?? DTC table not scaled?? - completely no idea, giberish everywhere.

Don't know if I'll get any clarification but I can't be the only one not getting the above 9 items.

12-14-2013, 08:34 PM	#1
Shiv@Openflash Senior Member Join Date: Sep 2013 Drives: 2013 FRS Location: SF, CA Posts: 2,629 Thanks: 1,055 Thanked 5,469 Times in 1,494 Posts Mentioned: 605 Post(s) Tagged: 9 Thread(s)	OpenFlash Tablet v1.42b maps now available Hi guys, Had to few hours free this morning to add more non-USDM ROM support and to tweak the E85 maps. So this update only applies to a few customers overseas and all those running the E85 maps. v1.42 Changes: -Added tuned file and developmental XDF (TunerPro) support for ZA1JA01I and ZA1JA010 ROMs (EH 6AT and EU 6AT). -Removed Beta status for all Stage 2 UEL E85 ROMs. -Revised Cranking Fuel Injector Pulse Width tables for all E85 ROMs to improved cold weather cold start performance (thanks @mad_sb for suggestion) Available for download HERE Have a great weekend! Cheers, Shiv

12-14-2013, 09:49 PM	#4
Sojhinn Lightning McQueen Driver Join Date: May 2012 Drives: Limited Red 6MT BRZ Location: San Diego Posts: 2,242 Thanks: 753 Thanked 1,167 Times in 644 Posts Mentioned: 77 Post(s) Tagged: 2 Thread(s)	Just saw. Thanks man! I will be doing some third gear pulls tomorrow morning and then I'll flash the new tune. __________________ Nicknamed Lightning by my Kids. Installed Mods: Phantom Electric Super Charger \| Open Flash Tune \| Perrin OP/ HFC Front pipe \| Invidia Q300 catback \| ST Suspension \| JDL Header \| Flex Fuel

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFlash Tablet	Rombinhood@OpenFlash	Software Tuning	1838	07-29-2023 06:35 PM
Openflash Tablet v1.31 beta maps (including Stage 2!) now available for download	Shiv@Openflash	Software Tuning	354	02-08-2015 05:23 PM
OpenFlash Tablet E85 (and gasoline) Maps now available	Shiv@Openflash	Software Tuning	401	08-13-2014 11:14 PM
OpenFlash Tablet: new v1.40b maps, new website, new sales, oh my	Shiv@Openflash	Software Tuning	122	12-14-2013 10:17 PM
OpenFlash Tablet Stage 1 v1.2 maps available for download	Shiv@Openflash	Software Tuning	31	10-31-2013 08:45 PM

12-14-2013, 10:28 PM	#5
Malt Senior Member Join Date: Oct 2013 Drives: 2015 WRX Location: NC Posts: 987 Thanks: 186 Thanked 624 Times in 364 Posts Mentioned: 24 Post(s) Tagged: 0 Thread(s)	Intresting, I had a suspicion that zeroing out the IPW compensation tables and only adjusting the IPW tables might not be the best way to go. I'll flash this right now and give it a try in the morning. If the IPW adjustments you made Shiv were not sufficient how much would you suggest increasing them by?

12-15-2013, 07:16 AM	#11
Malt Senior Member Join Date: Oct 2013 Drives: 2015 WRX Location: NC Posts: 987 Thanks: 186 Thanked 624 Times in 364 Posts Mentioned: 24 Post(s) Tagged: 0 Thread(s)	Unfortunately no noticeable improvements on cranking with these maps verses the tweaks I had applied. If anything it got slightly worse as it took 7 attempts to crank this morning. I'll log the crank tomorrow morning and post up logs. Maybe it could be just a matter of further tweaking the ipw tables for just me.

12-15-2013, 08:29 AM	#14
s2d4 Senior Member Join Date: Mar 2013 Drives: R32 GTR, AW11 MR2 SC, GTS86 R Location: OZ Posts: 2,615 Thanks: 603 Thanked 1,223 Times in 708 Posts Mentioned: 35 Post(s) Tagged: 0 Thread(s)	I may as well ask the questions here for the ZA1JA01I XDF, apologies if this is noobish but I don't now why the following is the way it is. @shiv@vishnu, hope you can shed some light for the beginners. 1. Throttle delta Fuel comp A and B has weird numbers as Y axis. 2. All of the GDI firing angle maps only has one 1 row with 7200 in Y axis, everything else is -0. 3.Close loop AFR A and B has weird numbers as Y axis. 4. Ignition base - has weird numbers as Y axis, it also ends at 7400. Doesn't this need to go to 7600 due to the increase rev limit? 5. Ignition Comp cylinder 1 and 2 - more giberish on Y axis. 6. Fuel Map - ends at 7400 but rev limit at 7600? 7. Ignition advance - ends at 7400 but rev limit at 7600? 8.Idle Targets - more giberish on Y axis although I know this is working as my car idles at around 750 now. 9. ?? DTC table not scaled?? - completely no idea, giberish everywhere. Don't know if I'll get any clarification but I can't be the only one not getting the above 9 items.

User Name		Remember Me?
Password